Brixton Metals Drills 22.15m of 4.44 g/t Gold Including 1.50m of 57.20 g/t Gold at the Trapper Gold Target
Brixton Metals Drills 22.15m of 4.44 g/t Gold Including 1.50m of 57.20 g/t Gold at the
Trapper Gold Target
VANCOUVER, British Columbia, October 15 , 2025 (GLOBE NEWSWIRE) - Brixton Metals
Corporation (TSX-V: BBB, OTCQB: BBBXF) (the “Company” or “Brixton”) is pleased to announce
additional drill results from the Trapper Gold Target from the 2025 season. A total of 6272m was
drilled at the Trapper Target from 30 holes this season. Assays are pending for the remaining 13
holes. The zone remains open for expansion.
Highlights
• Hole THN25-345 returned 22.15m of 4.44 g/t gold from 203.85m depth
o Including 1.50m of 57.20 g/t gold from 223.00m depth
• Hole THN25-342 returned 4.00m of 2.22 g/t gold from 210.00m depth
o Including 0.35m of 13.95 g/t gold from 212.35m depth
• Hole THN25-340 returned 30.85m of 1.47 g/t gold and 4.32 g/t silver from 61.65m depth
o Including 3.10m of 4.75 g/t gold and 16.01 g/t silver from 61.65m depth
o Including 6.00m of 4.24 g/t gold and 7.90 g/t silver from 80.00m depth
Chairman, CEO, Gary R. Thompson stated, “ We are thrilled to share another round of strong drill
results from the Trapper Gold Target, which continue to underscore the exceptional potential of this
emerging gold system. The intercept of 22.15 meters grading 4.44 g/t gold, including a high- grade
interval of 1.50 meters at 57.20 g/t gold, is particularly encouraging and speaks to the robust
mineralization we’re seeing at depth. These results, alongside other notable intercepts such as 30.85
meters of 1.47 g/t gold and 4.32 g/t silver, reinforce our confidence in the scale and continuity of the
Trapper zone. With assays still pending and the zone remaining open for expansion, we believe we
are only beginning to uncover the full extent of this exciting target.”
Figure 1. Trapper Gold Target Plan Map for Holes THN25-340, THN25-342, THN25-345 and THN25-
346.
Table 1. Select Assay Intervals in Holes THN25-340, THN25-342, THN25-345 and THN25-346.
Assay values are weighted averages. Reported intervals are drilling length and the true width of the
mineralized intervals has not yet been determined.
Discussion
Drill holes THN25-342 and THN25-345 were collared at the same location as THN25 -344 (see NR
07 Oct 2025. These holes were designed to infill and further delineate the trend of high- grade gold
mineralization previously intersected in hole THN22- 205 (Figure 1), which returned 64 metres
averaging 5.74 g/t gold. As demonstrated in this release, high- grade gold continues to be
encountered in this area.
Gold mineralization is hosted within Triassic lapilli tuff, which is intruded by a Cretaceous quartz
diorite and a feldspar porphyry dike of unknown age. The mineralization is associated with vein
assemblages containing pyrite, sphalerite, and galena (Figure 2). While all three lithologies host gold,
higher-grade intervals are preferentially located near the contacts between these units. Lower-grade
mineralization occurs between the reported intervals. Analytical results for silver and other elements
are pending from the laboratory.
Hole THN25-340 intersected gold and silver mineralization from shallow depths , associated with
feldspar porphyry dikes (Figure 3). This geological relationship, first recognized during the 2025
drilling campaign, has expanded the known footprint of gold mineralization eastward beyond
previously defined limits.
From To I nterval Gold Silver
meter meter m eter g/t g/t
THN25-345 203.85 226.00 22.15 4.44
including 223.00 224.50 1.50 57.20
THN25-342 210.00 214.00 4.00 2.22
including 212.35 212.70 0.35 13.95
THN25-346
THN25-340 61.65 92.50 30.85 1.47 4.32
including 61.65 64.75 3.10 4.75 16.01
including 80.00 86.00 6.00 4.24 7.90
Hole ID
No significant intercepts
Results
pending
Figure 2. Closeup Photograph of HQ Size Core of Mineralization in Hole THN25-345 at 210.50m.
Figure 3. Closeup Photograph of HQ Size Core of Mineralization in Hole THN25-340 at 63.70m.
Table 2. Collar Information for Holes THN25-340, THN25-342, THN25-345 and THN25-346.
Quality Assurance & Quality Control
Quality assurance and quality control protocols for drill core sampling was developed by Brixton.
Core samples were mostly taken at 1.5m intervals. High-grade intervals were taken at 0.35 to 1.00m
intervals. Blank, duplicate (lab pulp) and certified reference materials were inserted at a combined
rate of 15%. Core samples were cut in half, bagged, zip- tied and sent directly to ALS Minerals
preparation facility in Whitehorse, Yukon or Langley, British Columbia depending on available lab
Hole ID Easting (m) N orthing (m) Elevation (m) Azimuth Dip Depth (m)
THN25-340 630519 6485400 1226 2 - 65 237
THN25-342 630227 6485483 1335 8 -50 270
THN25-345 630227 6485483 1335 355 -45 262
THN25-346 630173 6485524 1325 15 -45 249
capacity. ALS Minerals Laboratories is registered to ISO 9001:2008 and ISO 17025 accreditations
for laboratory procedures. Samples were analyzed at ALS Laboratory Facilities in North Vancouver,
British Columbia for gold by fire assay with an atomic absorption finish, whereas Ag, Pb, Cu and Zn
and 48 additional elements were analyzed using four acid digestion with an ICP -MS finish. Over
limits for gold were analyzed using fire assay and gravimetric finish. The standards, certified
reference materials, were acquired from CDN Resource Laboratories Ltd., of Langley, British
Columbia and the standards inserted varied depending on the type and abundance of mineralization
visually observed in the primary sample. Blank material used consisted of non-mineralized siliceous
landscaping rock. A copy of the QAQC protocols can be viewed at the Company’s website.
Qualified Person (QP)
Mr. Gary R. Thompson, P.Geo., is a Senior Geologist, CEO and Chairman for the Company who is
a Qualified Person as defined by National Instrument 43 -101. Mr. Thompson has verified the
referenced data and analytical results disclosed in this press release and has approved the technical
information presented herein.
About Brixton Metals Corporation
Brixton Metals is a Canadian exploration company focused on the advancement of its mining
projects. Brixton wholly owns four exploration projects: Brixton’s flagship Thorn copper -gold-silver-
molybdenum Project, the Hog Heaven copper -silver-gold Project in NW Montana, USA, which is
optioned to Ivanhoe Electric Inc., the Langis -HudBay silver-cobalt-nickel Project in Ontario and the
Atlin Goldfields Project located in northwest BC which is o ptioned to Eldorado Gold Corporation.
Brixton Metals Corporation shares trade on the TSX -V under the ticker symbol BBB, and on the
OTCQB under the ticker symbol BBBXF. For more information about Brixton, please visit our website
at www.brixtonmetals.com.
On Behalf of the Board of Directors
Mr. Gary R. Thompson, Chairman and CEO
For Investor Relations inquiries, please contact : Mr. Michael Rapsch, Vice President Investor
Relations. email: [email protected] or call Tel: 604-630-9707
�������� Follow us on:
LinkedIn | Twitter/X | Facebook | Instagram
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Information set forth in this news release may involve forward-looking statements under applicable securities laws.
Forward-looking statements are statements that relate to future, not past, events. In this context, forward- looking
statements often address expected future business and financial performance, and often contain words such as
“anticipate”, “believe”, “plan”, “estimate”, “expect”, and “intend”, statements that an action or event “may”, “might”, “could”,
“should”, or “will” be taken or occur, including statements that address potential quantity and/or grade of minerals, potential
size and expansion of a mineralized zone, proposed timing of exploration and development plans, or other similar
expressions. All statements, other than statements of historical fact included herein including, without limitation, statements
regarding the use of proceeds. By their nature, forward-looking statements involve known and unknown risks, uncertainties
and other factors which may cause our actual results, performance or achievements, or other future events, to be materially
different from any future results, performance or achievements expressed or implied by such forward- looking statements.
Such factors include, among others, the following risks: the need for additional financing; operational risks associated with
mineral exploration; fluctuations in commodity prices; title matters; and the additional risks identified in the annual
information form of the Company or other reports and filings with the TSXV and applicable Canadian securities regulators.
Forward-looking statements are made based on management’s beliefs, estimates and opinions on the date that statements
are made and the Company undertakes no obligation to update forward-looking statements if these beliefs, estimates and
opinions or other circumstances should change, except as required by applicable securities laws. Investors are cautioned
against attributing undue certainty to forward-looking statements.