BCM Resources Corp Completes Deepest Diamond Drill Hole to Date at Thompson Knolls
BCM Resources Corp Completes Deepest
Diamond Drill Hole to Date at Thompson
Knolls
Vancouver, British Columbia--(Newsfile Corp. - April 27, 2026) - BCM Resources Corporation (TSXV:
B) ("BCM" or the "Company") is pleased to announce completion of its first diamond core drill hole of the
2026 Thompson Knolls Phase 4 exploration campaign. Hole TK15, a vertical hole collared
approximately 250 m southwest of Hole TK8, reached a depth of 3,995.5 feet (1,219 m), a record depth
for the project (see Figure 1). This hole was designed to test the extension of skarn Cu-Au-Ag-Mo
mineralization previously encountered in Hole TK8 (please refer to the Company's news release dated
May 24, 2023). Drilling contractors, National EWP (undertaking reverse circulation pre-collar holes), and
TonaTec Exploration LLC (completing diamond core tails), achieved completion of TK15 in record time,
reaching the targeted depth in 38 days.
Highlights of TK15:
Extensive intervals of pyroxene-diopside skarn were encountered within strongly marbleized
dolomites beginning at the top of bedrock at approximately 1,950 feet (594.5 m) and continuing to
a depth of approximately 3,900 feet (1,188.7 m) at which point quartzite became the dominant
lithology. Importantly, the intensity of skarn appears to increase with depth. This increase in skarn
intensity observed in Hole TK15 provides BCM's geologists with important information about the
vertical component for vectoring within the system.
Mineralization, represented by a magnetite-pyrite-chalcopyrite mineral assemblage of variable
intensity, occurs in breccias, veinlets, and in disseminated form within multiple intervals of skarn.
The top of the bedrock, approximately 300 ft (91 m), is heavily oxidized, perhaps due to a nearby
structure allowing deep penetration of oxidizing groundwater in this area. The intensity of iron oxide
formation in this zone provides BCM geologists with a reason to believe its origin is sulfide
weathering.
Thin fault-bounded dikes of silicified quartz-monzonite porphyry and silicified pyritic latite were
encountered within marbles below the zone of oxidation.
The most intense zones of mineralization contain up to 20% sulfides, with chalcopyrite accounting
for up to 5% of the mineralized rock. These intervals are local and do not represent the full extent of
the skarn-hosted mineralization.
A tectonic shear zone, or fault, with fragments of quartzites began at approximately 3,900 feet
(1,188.7 m) depth and continued to TD at 3,999.5 ft (1,219 m) depth.
Update on 2026 Thompson Knolls Drill Campaign:
Pre-collars for Holes TK16 and TK17, 250 m southwest of TK15 and a further 250 m, respectively, have
been completed. TonaTec Exploration LLC is currently moving its diamond core rig to pre-collar TK16,
where a deep core tail will be completed over the coming weeks.
National EWP is currently commencing pre-collar TK18, located approximately 250 m southwest of Hole
TK17.
Core logging and diamond saw cutting of TK15 are advancing as the 2026 Phase 4 drill campaign
continues.
Figure 1: Thompson Knolls Drill Map
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/6598/294300_2ed0e8b9e494d9a2_002full.jpg
Sergei Diakov, BCM's President and Chief Executive Officer, states: "
We are excited that Hole TK15
confirms the extension of skarn mineralization southwest of TK8. Our team views this as an
encouraging indication that we are dealing with a sizeable, mineralized trend. We are especially
impressed by the technical performance of both drilling contractors, National EWP and TonaTec
Exploration LLC, which have convincingly demonstrated their ability to reach targeted depth within a
relatively short period of time.
"
Qualified Person and QAQC
Mr. Richard R. Redfern, M.Sc., and Certified Professional Geologist, a Company "qualified person" for
the purposes of National Instrument 43-101, has verified and approved the information contained in this
news release.
About BCM Resources Corporation
BCM Resources is a diversified Canadian mineral exploration company primarily focused on advancing
exploration of its 100% controlled Thompson Knolls Porphyry Cu, Au, Ag, Mo discovery. The Company
also controls prospective Copper, Gold, and Molybdenum exploration projects in British Columbia. The
Company is managed by experienced and successful board members and advisors. For further
information, including area maps, sections, and photos, please visit our website at
www.bcmresources.com
or contact us by e-mail at
.
ON BEHALF OF BCM RESOURCES CORP.
"Sergei Diakov"
President and Chief Executive Officer
For further information, please contact:
Investor Relations, Telephone: 1 (604) 646-0144, ext. 331
www.bcmresources.com
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
Caution Concerning Forward-Looking Statements
:
This news release and related texts and images on BCM's website contain certain "forward-looking
statements" including, but not limited to, statements relating to the interpretation of mineralization
potential, drilling and assay results, future exploration work, and the anticipated results of this work.
Forward-looking statements are statements that are not historical facts and are subject to a variety of
risks and uncertainties which could cause actual events or results to differ materially from those reflected
in the forward-looking statements, including, without limitation: risks related to fluctuations in metals
prices; uncertainties related to raising sufficient financing to fund the planned work in a timely manner
and on acceptable terms; changes in planned work resulting from weather, logistical, technical,
governmental, social, or other factors; the possibility that results of work will not fulfill expectations and
realize the perceived potential of the Company's projects; uncertainties involved in the interpretation of
sampling and drilling results and other tests; the possibility that required permits and access agreements
may not be obtained in a timely manner; risk of accidents, equipment breakdowns or other unanticipated
difficulties or interruptions, and; the possibility of cost overruns or unanticipated expenses in these
exploration programs.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/294300