Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

AZS.V ·

Arizona Silver Intersects GOLD - Silver Mineralization IN Final 2022 Core Holes at the Philadelphia GOLD Project, Arizona

Drill Results

NEWS RELEASE

ARIZONA SILVER INTERSECTS GOLD - SILVER MINERALIZATION IN FINAL 2022

CORE HOLES AT THE PHILADELPHIA GOLD PROJECT, ARIZONA

Vancouver, British Columbia , January 24 2023 – Arizona Silver Exploration Inc . (TSXV:

AZS) (OTCQB:AZASF) announces assay results from three core holes, PC22-94, PC22-95 and PC22-96 on

the Philadelphia gold project, Arizona drilled in Q4 2022. The Philadelphia property hosts high-grade gold

and silver vein targets in Mohave County. The county is home to the Oatman Mining District which produced

over 2 million ounces of gold from high-grade epithermal veins.

The three new holes test part of the Northern Extension of the portion of the mineralized system that has was

our 2021-2022 priority. The holes demonstrate the continuity of the mineral system, which remains open down

dip and along strike towards undrilled portions of the patented claims leased in 2021. See Figure 1.

All three drill holes intersected wide intervals of potentially “bulk tonnage” gold grades, that is grades within

the parameters of grades currently being mined in the district.

Mr. Greg Hahn, V.P Exploration stated, “ Recently completed surface mapping and sampling demonstrates

continuity at surface of the quartz stockwork system with associated anomalous gold and silver values

continuing northward from the locations of these core holes. The surface geochemistry is similar to what is

evident at surface southward along the vein structure where drilling demonstrated increased thickness and

grade with depth. Our interpretation is that we are at the very top of the boiling zone along the entire outcrop

horizon of the mineral system.”

Mr. Mike Stark, President and CEO commented, ”Arizona Silver has the treasury and technical resources in

place to begin exploration in 2023, including drilling, immediately after we finalize contractual arrangements.

I expect to release details in the very near future.”

The following table summarizes the drill intercepts.

Q4 2022 Core Drill

Results

Thickness* Thickness*

Hole ID

From

(ft)

From

(m)

To

(ft) To (m) (ft) (m) Au gpt Ag gpt Notes

PC22-96 134.7 41.07 146.5 44.66 11.8 3.60 2.40 47.43 HW Vein

within 127.0 38.72 188.4 57.44 61.4 18.72 1.01 26.83 Stockwork quartz

plus 259.0 78.96 264.0 80.49 5.0 1.52 4.86 8.40 FW Vein

within 249.8 76.16 307.0 93.60 57.2 17.44 0.90 3.65 Stockwork quartz

all

within 127.0 38.72 307.0 93.60 180.0 54.88 0.71 11.46 total zone

PC22-95 327.8 99.94 336.0 102.44 8.2 2.50 5.10 18.34 HG Vein

within 324.1 98.81 351.2 105.61 27.1 6.80 3.79 16.18 Vein Zone

within 276.3 84.24 424.5 129.42 148.2 45.18 0.98 8.98 Stockwork quartz

within 259.0 78.96 461.0 140.55 202.0 61.59 0.78 7.64 Total zone

PC22-94 99.0 30.18 178.0 54.27 79.0 24.09 0.51 1.58 Stockwork quartz

and 256.0 78.05 290.0 88.41 34.0 10.37 0.41 1.84 Stockwork quartz

Total 113.0 34.45 0.48 1.66 Combined zones

* True Thickness is ~50-60% of Drill

Thickness

Core hole PC22-95 was drilled from a pad located approximately 50 metres north of previously completed RC

and core holes PRC22 -81 thru PC22-88. It intersected the target from 79 -140.5 metres (61.5 metres thick),

within predominantly rhyolite breccia, grading 0.71 g rams per tonne (“gpt”) gold (Au) and 11.46 gpt silver

(Ag). The FW vein breccia was intersected from 94.94 – 102.44 meters (2.5 metres thick) grading 5.10 gpt

Au and 18.34 gpt ag within a thicker vein zone from 98.81-105.61metres (6.74 metres thick) grading 3.79 gpt

Au and 16.18 gpt Ag, consisting primarily of yellow quartz clasts in a variably banded and bladed calcite

matrix. Minor visible gold was identified in some of the yellow quartz clasts. The balance of the mineralized

intercept is composed of quartz and calcite stockwork in rhyolite breccia.

Core hole PC22-96, a vertical hole, was collared 225 metres north and west of hole PC22-95 and located to

test the mineralized structure below a 1981 Meridian Gold reverse circulation drill hole. PC22-96 intersected

both the HW and FW vein within a package of strong to intense stockwork quartz with minor calcite from 38.7

- 93.6 metres (54.44 metres thick), in both rhyolite and granite breccia, carrying 0.71 gpt Au and 11.48 gpt Ag.

The HW and FW veins carried 3.6 metres at 2.4 gpt Au and 47.43 gpt Ag and 1.52 gpt Au and 8.4 gpt Ag

respectively, The drill hole intersects mineralization approximately 116 metres below the surface where gold

in stockwork quartz is exposed. The intercept d emonstrates that the mineral system continues and remains

open both along strike and down dip from previous drill intercepts, which will be the focus of continued drilling

in 2023.

Core hole PC22-94 was a ver tical hole drilled from the same pad as hole PC 22-95, a nd intersected the

mineralized zone high in the hole from 30.01-54.27 metres and lower down from 78.2 -88.41 metres. These

intercepts are up -dip from the intercept in hole PC22-95 and at a shallow er depth than the intercept in hole

PC22-96, consisting primarily of weak stockwork quartz in predominantly granite with no evidence of the HW

and FW veins present. We interpret this intercept to be above the boiling zone given the absence of the high

grade veins carrying boiling zone textures and the dominance of weak stockwork mineralization.

QA/QC Program

All core was delivered to the ALS sample preparation facility in Tucson, Arizona for photographing, sawing,

sampling, and sample preparation. All assaying will be conducted by ALS Global, an independent analytical

laboratory. Core was trucked to the ALS sample preparation facility in Tucson, Arizona, where the samples

were inventoried, dried, crushed and pulverized. Pulverized splits were sent to the ALS analytical facility in

Vancouver, British Columbia for analyses. All material handling is done under a strict chain of custody

protocol. Gold is determined by fire assay with an AA finish and silver is determined by ICP -MS methods

within a 31-element suite.

The Company maintains its own program of inserting Standard Reference material in the form of standards

and blanks to the sampling stream, prior to being shipped to ALS's preparation facility in Tucson, Arizona, in

addition to the independent QA/QC protocols of ALS Global.

Qualified Person

Gregory Hahn, VP -Exploration and a Certified Professional Geologist (#7122) is a Qualified Person under

National Instrument 43-101 ("NI 43-101") and has reviewed and approved the technical information contained

in this news release.

About Arizona Silver Exploration Inc.

Arizona Silver is a young exploration company focused on exploring gold-silver properties in western Arizona

and Nevada. The flagship asset is the Philadelphia property and the subject of this news release.

On behalf of the Board of Directors:

ARIZONA SILVER EXPLORATION INC.

Mike Stark, President and CEO, Director

Phone: (604) 833-4278

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies

of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

CAUTION CONCERNING FORWARD-LOOKING STATEMENTS

This news release includes certain forward -looking statements or information. All statements other than

statements of historical fact included in this release are forward -looking statements that involve various risks

and uncertainties. Forward-looking statements in this news release include statements in relation to the timing,

cost and other aspects of the 2023 exploration program; the potential for development of the mineral resources;

the potential mineralization and geological merits of the exploration properties; and other future plans,

objectives or expectations of the Company. There can be no assurance that such statements will prove to be

accurate and actual results and future events could differ materially from those anticipated in such statements.

Important factors that could cause actual results to differ materially from the Company's plans or expectations

include the risk that actual results of current and planned exploration activities, including the results of the

Company's 2023 drilling program(s) on its properties, will not be consistent with the Company's expectations;

the geology, grade and continuity of any mineral deposits and the risk of unexpected variations in mineral

resources, grade and/or recovery rates; fluctuating metals prices; pos sibility of accidents, equipment

breakdowns and delays during exploration; exploration cost overruns or unanticipated costs and expenses;

uncertainties involved in the interpretation of drilling results and geological tests; availability of capital and

financing required to continue the Company's future exploration programs and preparation of geological

reports and studies; delays in the preparation of geological reports and studies; the metallurgical characteristics

of mineralization contained within the exploration properties are yet to be fully determined; general economic,

market or business conditions; competition and loss of key employees; regulatory changes and restrictions

including in relation to required permits for exploration activities (includin g drilling permits) and

environmental liability; timeliness of government or regulatory approvals; and other risks detailed herein and

from time to time in the filings made by the Company with securities regulators. In connection with the

forward-looking information contained in this news release, the Company has made numerous assumptions,

including that the Company's 2023 programs would proceed as planned and within budget. The Company

expressly disclaims any intention or obligation to update or revise any forward-looking statements whether as

a result of new information, future events or otherwise, except as otherwise required by applicable securities

legislation.