Axo Copper Drills 5.2% Copper Equivalent Over 6.4 Metres in Recent Batch of Phase II Assay Results
NEWS RELEASE
Axo Copper Drills 5.2% Copper Equivalent Over 6.4 Metres in Recent Batch of Phase II
Assay Results
HALIFAX, NOVA SCOTIA – September 8, 2025 – Axo Copper Corp. (TSXV:AXO) ("Axo", “Axo
Copper” or the “ Company”) is pleased to announce new results from its recently initiated
Phase II drill program at the La Huerta Project , which continue to show elevated grades
through the La Huerta Trend at Las Marias. Additionally, the Company announces that it has
initiated its regional drill program at the La Huerta South target.
“The early results from the Phase II program continue to deliver high grades through Las
Marias” says Jonathan Egilo, President & CEO. “As we continue to find strong copper
mineralization at Las Marias and along the main La Huerta trend , we’re excited to begin
testing the promising new regional targets to the south.”
La Huerta Assay Results
The assay results are highlighted by hole LHCC -25-045 which intercepted 5.24% CuEq
(4.86% Cu and 30.0gpt Ag) over 6.4 metres, within a wider interval of 3.08% CuEq (2.89% Cu
and 15.0gpt Ag) over 13.2 metres. Copper mineralization in LHCC -25-045 was hosted in
chalcopyrite and bornite, cut through an andesitic host rock, with stronger bornite patches
present through the higher -grade section . The hole tested a down dip extension of the
historical hole G -023 (3.05% CuEq over 6.4 metres), with LHCC -25-045 finding
mineralization and the continuity of the La Huerta Trend on the other side of a minor fault
(see cross section in Figure 1). Thus far, 3,288 metres have been drilled as part of Axo’s 15,000
metre Phase II program, which was initiated this past June.
La Huerta South Regional Exploration Update
A second drill rig has now arrived at La Huerta , which will be initially targeting the La Huerta
South regional target, located about ~3km away from Las Marias , and previously highlighted
in The Company’s press release dated June 19, 2025 (see Figure 3 below) . As previously
announced, Axo has discovered multiple outcrops hosting copper mineralization with select
results above 10% Cu in the area, through chip and trench sampling. Additionally, more recent
sampling results at La Huerta South have begun seeing gold, as a new grab sample of an
outcrop has returned 1.41% Cu and 2.6 gpt Au.
FIGURE 1: CROSS SECTION HIGHLIGHTED BY LHCC-25-045
FIGURE 2: PLAN VIEW OF THE LA HUERTA TREND
FIGURE 3; LA HUERTA SOUTH REGIONAL TARGET ~3KM SOUTH OF LAS MARIAS
Table 1: La Huerta Assay Results
Hole ID Comment From To Length(1) Copper Silver Copper
Eq.1
m m m % gpt %
LHCC-25-033
- - - NSV2 NSV NSV
LHCC-25-035 La Huerta Trend 148.8 153.5 6.7 1.01 2.34 1.04
Including 152.9 153.5 0.6 2.53 4.20 2.58
LHCC-25-036 La Huerta Trend 20.6 24.5 4.0 1.62 4.91 1.69
LHCC-25-045 La Huerta Trend 165.0 178.1 13.2 2.89 14.97 3.08
Including 168.7 175.0 6.4 4.86 30.00 5.24
1CuEq calculated using metals prices of US$9,650/tonne copper and US$37.50/oz silver
2NSV=No significant values
Table 2: La Huerta drillhole coordinates
Hole ID EASTING NORTHING ELEV DEPTH AZ DIP
m m m m ° °
LHCC-25-033 580,370 2,146,824 689 204.9 335 -56
LHCC-25-035 580,376 2,146,882 689.2 177.0 335 -65
LHCC-25-036 580,394 2,146,957 712.4 131.0 335 -63
LHCC-25-045 580,278 2,146,811 676.2 242.0 335 -60
About Axo
Axo Copper Corp. is a Canadian mineral exploration company engaged in the exploration and
development of the La Huerta property, a new copper discovery in Jalisco, Mexico. Initial
exploration has yielded high-grade copper both at surface through sampling programs, and
at depth through initial drilling. The Company is focused on continuing to define near-surface
mineralization along the La Huerta Trend, expanding mineralization at depth, and targeting
new discoveries in an underexplored district.
Additional information can be found at the Company's website: www.axocopper.com.
Procedure, Quality Assurance / Quality Control and Data Verification
The diamond drill core (HQ size) is geologically logged, photographed and marked for
sampling. When the sample lengths are determined, the full drill core is sawn with a diamond
blade drill core saw with one half of the drill core being bagged and tagged for assay. The
remaining half portion is returned to the drill core trays for storage and/or for metallurgical
test work.
The sealed and tagged drill core sample bags are transported to the ALS Chemex facility in
Querétaro and Zacatecas, Mexico. ALS Chemex crushes the samples and prepares 200-300
gram pulp samples with ninety percent passing Tyler 150 mesh (106 μm). Copper and multi-
element analysis is completed using total digestion (Code ME -ICP61 Total Digestion ICP).
Over limits greater than 10,000 grams per tonne copper are assayed using Cu-OG62.
Quality assurance and quality control ("QA/QC") procedures monitor the chain -of-custody
of the samples and includes the systematic insertion and monitoring of appropriate
reference materials (certified reference materials, blanks and duplicates) into the sample
strings. The results of the assaying of the QA/QC material included in each batch are tracked
to ensure the integrity of the assay data. All results stated in this announcement have passed
AXO’s QA/QC protocols.
Qualified Person
Charles Spath, P. Geo., is the Qualified Person for Axo Copper Corp., as defined under National
Instrument 43 -101. Mr. Spath has reviewed and approved the scientific and technical
information in this press release.
For further information, please contact:
Jonathan Egilo
President and CEO
613 882 5126
Forward looking information:
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of
the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release includes certain “forward-looking statements”. All statements other than statements of
historical fact included in this release, including, without limitation, statements regarding the Offering, the
Company’s plans in respect of the La Hu erta property and receipt of all necessary regulatory approvals,
are forward-looking statements that involve various risks and uncertainties. Forward -looking statements
are frequently characterized by words such as “will”, “propose”, “may”, “is expected to ”, “subject to”,
“anticipates”, “estimates”, “intends”, “plans”, “projection”, “could”, “vision”, “goals”, “objective”,
“focus” and “outlook” and other similar words. Forward-looking information in this news release is based
on the opinions and assumptions of management considered reasonable as of the date hereof, including,
but not limited to, general business and economic conditions will not change in a materially adverse
manner; the potential of high grade copper mineralization at the Company’s properties; the results (if any)
of further exploration work to define and expand mineral resources; the ability of exploration work
(including drilling) to accurately predict mineralization; and the ability to generate additional drill targets.
Although the Company believes the expectations expressed in such forward -looking statements are based
on reasonable assumptions, there can be no assurance that such statements will prove to be accurate and
actual results and future events could differ materially from those anticipated in such statements. Important
factors that could cause actual results to differ materially from the Company’s expectations include
environmental risks, limitations on insurance coverage, risks and uncertainties related to exploration,
development, operations, commodity prices and global financial volatility including as a result of tariffs,
risk and uncertainties of operating in a foreign jurisdiction as well as additional risks described from time
to time in the filings made by the Company with securities regulators. The Company disclaims any intention
or obligation to update or revise any forward -looking information, other than as required by applicable
securities laws.