Antimony Resources Corp. (CSE: ATMY) (OTCQB: ATMYF) (FSE: K8J0) Announces Assay Results at the Bald Hill Antimony Deposit including intersections of 26.9% Antimony (Sb)
Antimony Resources Corp. (CSE: ATMY) (OTCQB: ATMYF) (FSE: K8J0)
Announces Assay Results at the Bald Hill Antimony Deposit including
intersections of 26.9% Antimony (Sb)
Vancouver, Canada – May 13, 2026, - Antimony Resources Corp. (CSE: ATMY) (OTCQB: ATMYF)
(FSE: K8J0) (the “Company” or “Antimony Resources” or “ATMY”) is pleased to announce that it
continues to receive assay results for the latest phase of drilling at Bald Hill. Included are the
results of the next three drill Holes.
Highlights
• Assays for an additional three holes have been received
• Values of 26.9% and 6.9% antimony (Sb) in stibnite bearing core.
• Thicknesses of up to 15 meters are seen.
• These holes continue to extensions of the Bald Hill Main Zone to depth
• Average depth of drilling for these holes is greater than 250 meters with the deepest
intersection at 495 meters depth.
Drilling summary
Mineralized intervals for the most recent drill holes are presented below and the latest
results are detailed in Table 1. Notably drillholes BH-26-08 and BH-26-10 had wide zones of
mineralization which contain higher grade sections. These zones are at depths of over 350
meters.
BH-26-01 – 2.26% Antimony (Sb) over 2.0 meters (m) from 268.85 m to 271.5 m and
0.37% Sb over 6.2 m from 283.5 m to 289.7 m
BH-26-04 – 3.13% Sb over 1.75 m from 104.95 m to106.7 m and 1.75% Sb over 1.9
m from 248.0 m to 249.9 m
BH-26-05 – 0.71% Sb over 3.8 m from 324.5 m to 329.3 m
BH-26-06 – 0.36% Sb over 1.0 m from 409.0 to 410.0 m
BH-26-08 – 0.14% Sb over 14.7 m from243.9 m to 258.6 m and 0.3 %Sb from
263.6m to 266.5 m
BH-26-10 – 0.26% Sb over 13.85 m from 341.0 m to 354.85 m including 1.28 % Sb
from 342.5 m to 344.25 m and 1.37% Sb over 14.15 m from 379.75 to 393.3 m
including 26.7 % Sb over 0.45 m and 6.42% Sb over 0.3% m
Note that these are drill intersection lengths and the true thickness has not been
determined but is estimated to be between 65% and 70% and of intersected thickness
depending on the angle of drilling.
Figure 1: Drill hole Locations
The drill holes reported here are testing deeper sections of the Main Zone at Bald Hill
Antimony Deposit.
The most significant intersection is seen in drillhole BH-26-10 where two wide zones of
mineralization were encountered; 13.85 meters and 14.15 meters containing high-grade
zones of 26.7% and 6.4% antimony.
Table 1: Assay Values for Latest Drill Results
BH-26-
06
From (m) To (m) length (m) Sb (%)
409.00 410.00 1.00 0.36
BH-26-
08
From (m) To (m) length (m) Sb (%)
243.90 258.60 14.70 0.14
and 262.60 266.50 3.90 0.30
BH-26-
10
From (m) To (m) length (m) Sb (%)
341.00 354.85 13.85 0.26
including 342.50 344.25 1.75 1.28
and 379.75 393.90 14.15 1.37
including 388.85 389.30 0.45 26.7
and 393.60 393.90 0.30 6.42
QA/QC
Samples from the drilling rigs are transported to our secure Core Handling Facility where they
are examined by our geotechnical staff. Once the information on core conditions including RQD,
lost core etc. are recorded and the core is confirmed to be intact and orderly it is logged and
marked for sampling by our professional geological staff. The marked core for sampling is cut by
diamond say one half is returned to the box for safekeeping and one half is placed in plastic
bags. The bags are sealed and placed in larger canvas bags for shipment to the Activation Labs
Processing facility in Fredericton where they are crushed and prepared for shipment to the
assay lab in Ancaster Ontario. The samples are analyzed using Actlabs Method Code 1E3 Aqua
Regia ICPOES for the multi element and Code 1A2 Fire Assay AA for gold.
Quality Assurance and Quality Control (QA/QC) samples are inserted in the sample runs which
include a known standard for antimony and gold, a core duplicate, a blank, and a pulp duplicate.
Activation Labs also has standard QA/QC protocols which are reported with each assay batch.
Activation Labs is an internationally accredited assay lab.
Mr. James Atkinson P .Geo., CEO of Antimony resources commented “The additional
assay results just received continue to show the high-grade nature of the assays from
the 2026 winter drill program started in February. We note that these assay values for
antimony are similar to previously released results and that some of the results are
from intersections close to 400 meters deep. Thick intersections of antimony-bearing
stibnite mineralization are seen in two sections of Drillhole BH-26-10 at a depth over
350 meters suggesting the depth potential of the mineralization. Our next drilling
program which has already begun will test the extent of mineralization to depth as well
as along strike.”
Bald Hill Antimony Project - A Project with Significant Antimony Potential
Highlights
• Bald Hill is a well-known, high-grade antimony deposit in southern New
Brunswick, Canada.
• Assays indicate that Bald Hill is the highest-grade antimony deposit in North
America with mineable widths indicated by drilling.
• Drilling has outlined an antimony deposit in the Main Zone over 600 meters
long and to a depth of at least 350 meters. The mineralization is open in all
directions.
• Widths of mineralization average 4 to 5 meters and grades average 3% to 4%
antimony.
• NI-43-101 Technical Report: The estimated potential quantity and grade of the
drilled area from the 2025 Technical Report, which is the target of our
exploration, is reported in the Technical Reports approximately 2.7 million
tonnes with a grade between 3% and 4% antimony1 . For more details on the
Potential of the project as described by the author of the Technical Report
please consult the NI43-101 which has been filed on SEDAR. Antimony
Resources Corp. has not completed enough work to confirm this estimate. The
potential quantity and grade are conceptual in nature as there has been
insufficient exploration to define a mineral resource, and it is uncertain if
further exploration will result in the target being delineated as a mineral
resource.
• Potential to expand based on recently discovered targets and additional claims
added to the property to the west, south and east.
• New Zones outlined by Soil Sampling approximately 3 kilometres south of the
Main Zone on the newly acquired Second Run Claim.
(1) NATIONAL INSTRUMENT 43-101 TECHNICAL REPORT: BALD HILL ANTIMONY
PROJECT SOUTHERN NEW BRUNSWICK, CANADA NTS 21G/09 Prepared for
Antimony Resources March 2, 2026. Prepared By John Langton, M.Sc., P .
GEO., - JPL GeoServices, Fredericton, New Brunswick, Canada.
The technical contents of this news release were reviewed and approved by Jim
Atkinson, MSc., P . Geo., President and CEO of Antimony Resources Corp. who is a
qualified person as defined by National Instrument 43-101.
About Antimony Resources Corp. (CSE: ATMY) (OTCQB: ATMYF) (FSE: K8J0)
Antimony Resources Corp. is an exploration and development company focused
exclusively on Antimony. The Company’s management team possesses extensive
experience in financing, exploration, development and mining. The Company is
focused on becoming a significant North American producer of antimony.
www.antimonyresources.ca
On Behalf of the Board of Directors
Jim Atkinson, CEO and President
For further information please contact:
Anthony Simone, President, Simone Capital Inc.
416-881-5154, [email protected]