Antimony Resources Corp. (CSE: ATMY) (FSE: K8J0) Announces Financing
Antimony Resources Corp. (CSE: ATMY) (FSE: K8J0) Announces Financing
Vancouver, Canada – August 6, 2025, Vancouver, BC, - Antimony Resources Corp. (CSE: ATMY)
(FSE: K8J0) (the “Company” or “Antimony Resources” or “ATMY”) announces a private placement
financing (the “Offering”) of up to 10,000,000 Common Shares of the Company at a price of
C$0.20 per Common Share for gross proceeds to the Company of up to $2, 000,000. Antimony
Resources also announces a Flow -Through financing of up to 7,500,000 Flow-Through common
shares at $0.2 7 for gross proceeds to the Company of up to $ 2,025,000. The net proceeds
received from the Offering will be used by the Company for exploration and development
activities and general working capital.
About Antimony Resources Bald Hill Antimony Project
Highlights
Assays received from current drilling:
1. High-grade antimony bearing stibnite (“Sb”) assays have been returned for Drill Holes BH-25-05,
BH-25-08, and BH-25-09.
2. Drill Hole BH-25-08 returned 14.91 % Sb over 3.0 meters at a depth of 88.8 to 91.8 m including
massive antimony stibnite which returned 28.76% Sb over 1.7 meters.
3. Drill Hole BH-25-09 returned 9.85% Sb over 4.3 meters from 103.6 to 107.9 meters depth
including 18.19% Sb from 104.6m to 106.4m depth.
4. Drill Hole BH-25-05 returned 1.1% Antimony (Sb) over 14.5 meters at a depth of 108.8 to 123.3
meters (m).
Additional Drill Holes completed in Phase One Program
1. The low cost and efficiency of the drilling program resulted in an additional 650 meters of
drilling to be completed over the budgeted 2500 meters. A total of 3150 meters was completed.
The additional drill holes extended the drilled area to the southeast and intersected antimony
stibnite bearing breccia in that area. Final samples have been submitted to the laboratory for
assay.
2. The antimony-bearing stibnite mineralization has been outlined in surface outcroppings over a
distance of at least 300 meters to the southeast beyond the original drilling.
3. Assays are pending and are expected for the remaining drill holes and should be received over
the next three to four weeks. Additional assays will be reported as the laboratory completes the
analysis, and the company receives and compiles the results.
Highlights from Past exploration
• Bald Hill is a well-known, high-grade antimony deposit in southern New Brunswick
• Past work including drilling has outlined an antimony deposit over 500 m. long
• Widths average over 3 meters and grades average 3% to 4% antimony.
• Historical NI-43-101 Technical Report: Potential quantity and grade of the drilled area,
which is the target of our exploration, is in the 725,000 to 1,000,000 tonne range
grading 4.11% to 5.32% Sb (~30,000 to 40,000 tonnes contained antimony)1
• Potential to expand based on additional known targets
The Bald Hill Antimony Property
The property is located approximately equal distance from Sussex, Fredericton and St John in
southern New Brunswick. Access is very good with provincial and regional highways crossing
and adjacent to the property. Drilling can be completed year-round. There is over 5400 meters
of drill core from past exploration available for examination in the Sussex office of the New
Brunswick Geological Survey. A total of 25 drillholes totaling over 5400 m have been completed
on the property.
The deposit consists of at least three antimony-bearing breccias and hydrothermal veins zones
trending northwesterly. Mineralization has been defined over a 700-meter strike length to a
vertical depth of 300 meters and is open in all directions and to depth. High Grade antimony has
been encountered in previous drilling including the discovery Hole DDH08-03 which intersected
4.51m at a grade of 11.7% Antimony (Sb) including 2.29m grading 20.9% Sb.
A possible extension of the Main Zone was discovered in 2014. Trenching approximately 450
meters south of Main Zone returned values of 2.90% Sb over 8.18m, which included 5.79% Sb
over 1.75m and 8.47% over 1.53m. Drilling in this area confirmed the presence of antimony
bearing stibnite mineralization similar to the Main Zone which has not been sufficiently
explored.
The exploration plan in 2025 was to complete at least 2,500 meters of diamond drilling to explore
the known mineralized zone, extend the mineralization to the north and south and down dip and
expand parallel veins discovered in the past. In fact over 3100 meters were copleted. It is hoped
that the planned drilling programs will allow us to calculate a Maiden Resource by the end of the
year. An historical NI 43-101 technical report, prepared by CRA in 20101, identified the potential
for between 705,000 and 1,000,000 metric tonnes at an average grade between 4% and 5%
antimony (Sb)1). - Antimony Resources Corp. has not completed enough work to confirm this
estimate. The potential quantity and grade are conceptual in nature as there has been
insufficient exploration to define a mineral resource, and it is uncertain if further exploration
will result in the target being delineated as a mineral resource.
1 NATIONAL INSTRUMENT 43-101 TECHNICAL REPORT BALD HILL ANTIMONY PROJECT SOUTHERN NEW BRUNSWICK, CANADA
prepared by: Conestoga-Rovers & Associates MAY 2010 REF. NO. 070813 (1)
The technical contents of this news release were reviewed and approved by Jim Atkinson, MSc.,
P .Geo., who is a qualified person as defined by National Instrument 43-101.
Antimony Resources Corp. is a exploration and development company focused exclusively on
Antimony. The Company’s management team possesses extensive experience in financing,
exploration, development and mining. The Company is focused on becoming a significant North
American producer of antimony.
www.antimonyresources.ca
On Behalf of the Board of Directors
Jim Atkinson, CEO and President
For further information please contact:
Anthony Simone, President, Simone Capital Inc.
416-881-5154, [email protected]