Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

ASTR.V ·

Astra Makes New Discovery, Hitting 6.3 Metres of 837 g/t Silver and 3.32 g/t Gold at La Manchuria Project, Argentina

Drill Results

ASTRA EXPLORATION INC. (TSX-V: ASTR, OTCQB: ATEPF, FSE: S3I)

NEWS RELEASE

Astra Makes New Discovery, Hitting 6.3 Metres of 837 g/t Silver and 3.32 g/t Gold

at La Manchuria Project, Argentina

Highlights:

• Basalto Zone - Hole LMD-128: 6.3 metres grading 837 g/t silver and 3.32 g/t gold including

o 1 metre grading 3,309 g/t silver and 11.45 g/t gold

o 1 metre grading 1,209 g/t silver and 6.07 g/t gold

• East Feeder of Main Zone – Hole LMD-123: 1 metre grading 541 g/t silver and 2.0 g/t gold

• Veins in the Main Zone appear to be converging with depth, revealing compelling drill

targets for high-grade feeder systems at relatively shallow depths

• High-grade mineralization near surface in the Basalto Zone , an unexplored parallel vein

system approximately 200 to 300 metres southwest of the Main Zone, significantly

increasing the size of the vein field

• Multiple mineralized zones in all seven drill holes reported in this release continue to add

size to the bulk-tonnage disseminated deposit

• The Company is fully -funded for another 5,000 metres expected to commence in the

coming weeks

Vancouver, British Columbia – March 2, 2026 – Astra Exploration Inc. (TSX-V: ASTR, OTCQB:

ATEPF, FSE: S3I) (“Astra” or the “Company”) is pleased to announce the second batch of assays

consisting of seven DDH holes from the Phase II drill program at the La Manchuria Gold and

Silver Project in Santa Cruz, Argentina. Assays remain pending for 12 holes.

Astra’s CEO, Brian Miller commented:

“We are very encouraged with this set of drill holes for a number of reasons. First, structural data

shows early indications that the West, Central, and East Feeders in the Main Zone could be

converging at depth, which is exactly what we’d hoped to see in our pursuit of the high -grade

feeder structures . These feeder structures often represent the most concentrated grades in

epithermal systems and can have high economic value, especially if located at shallow vertical

depths. They are the ‘plumbing system’ which feeds the bulk disseminated system near surface.

Second, these results further expand the footprint of the bulk disseminated system with high

grades near surface, which remains open in all directions.”

Astra’s Exploration Director, Diego Guido commented:

“The mineralization and vein textures encountered at the Basalto Zone (including the presence of

banded chalcedony, adularia, bladed calcite, amethyst, and silver sulfosalts) confirms a shallow-

level low -sulphidation epithermal (LSE) environment in a previously untested area of La

Manchuria. This further expands the vein field which remains open in all directions. The high-

grade silver (locally multi -kilogram silver) accompanied by significant gold values within this

shallow LSE setting highlights the fertility of the La Manchuria hydrothermal system and supports

continued drilling in the area.”

Program Details

A total of 25 drill holes were completed in late 2025 totaling 5,119 metres (see Feb 10, 2026 news

release: “Astra Intersects 1,286 g/t Silver and 9.0 g/t Gold Over 3.1 Metres; Extends High-Grade

at Depth and Along Strike at La Manchuria Project, Argentina ”). The drill program focused on

expanding the near-surface footprint of the system with shallow (<200m vertical depth) drill holes.

The seven holes reported in this news release are from the Basalto Zone, Main Zone, and Road

Zone (Figure 1). Every hole intersected multiple intervals of gold and silver mineralization, most

of which exceeded 1 g/t gold equivalent (Table 1) with local areas of very high grades in the newly-

discovered Basalto Zone.

Figure 1: Phase II holes drilled to date with assays for the seven holes in this news release highlighted in yellow .

Location for long section in Figure 3 in dark blue dashed line.

The Company has recently mobilized field crews to carry out geophysical surveys to extend the

current 3D resistivity model to the south and west beneath post -mineral cover. This will provide

additional drill targets for the upcoming 5,000 metre program expected to commence in late March

or early April.

Basalto Zone

Holes LMD-127 and LMD-128 were located in the Basalto Zone and designed to test the

northwestern and southeastern extensions of the initial two holes drilled in the area, LMD-105

(Phase I) and LMD-117 (Phase II), which were reported previously.

Hole LMD-128 intersected two shallow groups of silver-rich veinlets and hydrothermal breccias

from 24.5 to 39 metres downhole which included 6.3 metres grading 837 g/t silver and 3.32 g/t

gold (Figure 2). The vein system strikes west-northwest and dips to the east. This system

remains open along strike and at depth.

Some of the veinlets intersected in LMD-128 are oriented subparallel to the drill core axis.

Variable strikes and dips of quartz veinlets (even parallel to bedding) were observed at some

Main Zone outcrops and are related to the shallow level. Based on current geological

interpretation, the true thickness of this mineralized zone is estimated to be 40-50% of the

reported downhole interval (Figure 2).

Hole LMD-127 intersected two zones of mineralization (Table 1) associated with shallow-level

veins and veinlets hosted within an andesitic sill. Anomalous gold and silver values within the

andesitic sill are considered encouraging, as they may indicate potential for higher-grade

mineralization within the underlying pyroclastic host rocks.

Figure 2: Cross section of hole LMD-128 showing the shallow mineralized areas at Basalto Zone. Gold and silver

results are in grams per tonne (g/t).

West Feeder at Main Zone

The West Feeder, currently ~750 metres in strike length, contains some of the thickest veins

and highest grades currently known at La Manchuria and is open in all directions.

Holes LMD-125 and LMD-126 were designed to test the northwest portion of the West Feeder

(Figure 1 and Figure 3). Both holes intersected gold and silver mineralization within shallow

epithermal system levels. The Company believes the relatively lower gold and silver grades are

a result of shallow system levels, indicating that deeper portions of the system have potential for

more significant mineralization. Assays are pending for four more holes in this area (Figure 3)

three of which are approximately 50 metres beneath LMD-126.

It is noteworthy that the highest grade interval in LMD-126 was hosted within an andesitic sill,

further demonstrating that this host rock is more productive than previously recognized.

Figure 3: Long section of the West Feeder in the Main Zone (location shown in Figure 1 by dark blue dashed line)

with interpreted downthrown target areas. Completed Phase II holes in blue pending assay results. Previously

reported Phase II holes in black/white. LMD-125 and LMD-126 reported in this news release in red. Resistivity values

expressed in ohm-m.

East Feeder at Main Zone

Drill holes LMD-123 and LMD-124 were designed to test, from north to south, the eastern

portion of the Main Zone, referred to as the East Feeder (Figure 1) which is now interpreted to

dip toward the southwest. This may be significant, as early data indicates the West, Central, and

East Feeders of the Main Zone could be converging at depth and makes for a compelling drill

target in the upcoming program.

Both holes returned multiple gold and silver intervals along their lengths (Figure 1 and Table 1)

further supporting and refining the shallow bulk disseminated mineralization model for the Main

Zone, which remains open in all directions at the East Feeder.

The highest grade interval in LMD-123 (1.0 m grading 2.04 g/t Au and 540.91 g/t Ag) was

hosted within an andesitic sill, further demonstrating the productive nature of some of the

andesitic units in the system.

Road Zone

In the Road Zone, hole LMD-122 represents the first drill test of the area. The hole intersected

two epithermal structures representing the shallowest system elevations observed to-date.

Although only low-grade mineralization was encountered, the observed epithermal textures

suggest potential for fully-preserved and higher-grade mineralization at depth.

Table 1: Assays from seven holes of Phase II drilling at La Manchuria using cutoff grade of 0.5 g/t AuEq. Ag:Au ratio

of 60 using $3,600 Au and $60 Ag. Recoveries of 94% for Au and 85% for Ag is an average based on three regional

mine operations 1 and are reflected in AuEq and AgEq values above. Table shows results greater than 1 g/t AuEq.

Estimated true widths are approximately 85% of widths reported herein for all the holes, except those in the Basalto

Zone (LMD-127 & LMD-128) where some veinlets are parallel to drill core and true width is estimated to be 40-50%.

Sampling Procedures

Drill samples consisted of HQ core which were split in half, sampled, bagged, and tagged by

Astra´s geological team and then delivered to the Alex Stewart International Argentina

laboratory in Mendoza. Drill samples were prepared with P5 code and then analyzed with fire

assay for gold (Au4-50) and multi-elements by ICP (ICP-AR 39). Silver (>200 g/t) over-limits

Hole From (m) Width (m) Au (g/t) Ag (g/t) AuEq AgEq

LMD-122 20 3 0.20 47.4 0.86 51.57

LMD-122 60 2 0.30 50.5 1.00 59.85

LMD-123 1.8 0.5 0.92 21.0 1.16 69.74

LMD-123 66 4 0.60 30.2 0.99 59.51

LMD-123 97 1 0.39 106.0 1.87 112.10

LMD-123 127 1 3.15 39.0 3.51 210.81

LMD-123 135 1 2.03 37.1 2.43 146.03

LMD-123 167 1 3.85 3.7 3.67 220.29

LMD-123 203 1 2.04 540.9 9.58 574.83

LMD-124 4 1 2.57 9.8 2.55 153.28

LMD-124 25 2 1.24 14.9 1.38 82.60

LMD-124 113 5 0.56 57.2 1.34 80.22

LMD-124 125 1 1.86 198.1 4.55 273.29

LMD-124 168 5.3 0.90 39.6 1.41 84.42

including 170 1.3 3.24 65.0 3.97 237.99

LMD-125 15 1 0.86 9.1 0.94 56.24

LMD-125 35 3 0.99 4.4 0.99 59.58

LMD-126 11 2 1.08 4.2 1.07 64.44

LMD-126 15 4 0.41 28.4 0.78 46.98

LMD-126 65 3 0.27 152.9 2.42 145.18

including 67 1 0.60 390.0 6.09 365.34

LMD-126 91 2.15 2.67 11.3 2.67 160.18

LMD-127 88.5 2 0.43 137.1 2.34 140.52

LMD-127 124 4 2.15 2.5 2.06 123.34

LMD-128 24.5 6.3 3.32 837.2 14.98 898.89

including 24.5 1 6.07 1209.0 22.83 1370.00

including 28.8 1 11.45 3309.0 57.64 3458.43

LMD-128 37 2 0.54 89.9 1.78 106.83

were analyzed by gravity method (Ag4A-50). A total of 131 Blanks and 154 standards (4

different Au and Ag grades) were used as QAQC for the group of 2,831 samples.

About the Company

Astra Exploration Inc. is a precious metals exploration company based out of Vancouver, BC that

is actively building a portfolio of high -quality projects in some of the most important mining

jurisdictions in Latin America.

The La Manchuria gold -silver project in Santa Cruz, Argentina , over which Astra has an

option to acquire 90% interest from the owner, Patagonia Gold Corp , is a high -grade gold and

silver low sulphidation epithermal (LSE) deposit located in the prolific Deseado Massif which hosts

multiple world-class LSE precious metals deposits including Cerro Vanguardia and Cerro Negro,

Santa Cruz, Argentina.

The 100% owned Pampa Paciencia gold and silver project in northern Chile is located in the

Paleocene mineral province in proximity to such major operating mines as Spence and Sierra

Gorda. The project shares several important geological similarities to other Paleocene LSE gold-

silver deposits including Faride and El Peñón.

The 100% owned Cerro Bayo project in northern Chile is located in the Maricunga belt

approximately 20 km from the Refugio Mine. The project hosts a high sulphidation epithermal

(HSE) +/- porphyry gold system with similarities to the Salares Norte deposit to the north in the

same belt. The Maricunga belt is one of the most en dowed regions in the world for gold and

copper deposits.

Qualified Person

The technical data and information as disclosed in this news release has been reviewed and

approved by Darcy Marud, who is an Independent Director of Astra . Mr. Marud is a Practicing

Member of the Association of Professional Geoscientists of Ontario and is a qualified person as

defined under the terms of National Instrument 43 -101 – Standards of Disclosure for Mineral

Projects.

For further information please contact:

Brian Miller

Chief Executive Officer

Tel. 604.428.0939

Email: [email protected]

Katrina Damouni

Corporate Development

Tel. 604.428.0939

Email: [email protected]

References:

1 Sources:

Steinmann, Michael, March 2006

Manantial-Espejo Project Canadian Standard NI 43-101, Santa Cruz Province, Argentina

Prepared for Minera Triton Argentina, S.A.

https://panamericansilver.com/wp-content/uploads/2022/04/Manantial-Espejo-Technical-

Report.pdf

Goldcorp – Third Quarter Report, September 30, 2017

https://s24.q4cdn.com/382246808/files/doc_financials/mda/2017/MD-A-FS-2017Q3-Website.pdf

AngloGoldAshanti – Technical Report Summary, Cerro Vanguardia, A Life of Mine Summary

Report, December 31, 2021

https://www.sec.gov/Archives/edgar/data/1067428/000162828022007855/a2021_-

xcerroxvanguardia.htm

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of

the TSXV) accepts responsibility for the adequacy or accuracy of this release.

This news release may contain certain “Forward-Looking Statements” within the meaning of the

United States Private Securities Litigation Reform Act of 1995 and applicable Canadian securities

laws. When or if used in this news release, the words “anticipate”, “believe”, “estimate”, “expect”,

“target, “plan”, “forecast”, “may”, “schedule” and similar words or expressions identify forward -

looking statements or information. These forward-looking statements or information may relate

to the Company’s business activities; exploration on the Company’s properties including drilling at

the La Manchuria project. Such statements represent the Company’s current views with respect

to future events and are necessarily based upon a number of assumptions and estimates that,

while considered reasonable by the Company, are inherently subject to significant business,

economic, competitive, political and social risks, contingencies and uncertainties. Many factors,

both known and unknown, could cause results, performance or achievements to be materially

different from the results, performance or achievements that are or may be expressed or implied

by such forward-looking statements. Such factors include, without limitation: development of the

industry in which the Company operates; risks associated with the conduct of the Company's

business activities; risks relating to reliance on the Company's management team and outside

contractors; currency fluctuations; risks regarding the failure to generate sufficient cash flow from

operations; laws and regulations governing the industry in which the Company operates; the

ability of the communities in which the Company operates to manage and cope with the

implications of COVID-19; the economic and financial implications of COVID-19 to the Company;

operating or technical difficulties; employee relations, labour unrest or unavailability; stock market

volatility; conflicts of interest among certain directors and officers; lack of liquidity for shareholders

of the Company; litigation risk; and other risk factors disclosed in the Company’s public disclosure

documents available on the Company’s profile at www.sedarplus.ca. Readers are cautioned

against attributing undue certainty to forward-looking statements or forward-looking information.

Although the Company has attempted to identify important factors that could cause actual results

to differ materially, there may be other factors that cause results not to be anticipated, estimated

or intended. The Company does not intend, and does not assume any obligation, to update these

forward-looking statements or information to reflect changes in assumptions or changes in

circumstances or a ny other events affecting such statements and information other than as

required by applicable laws, rules and regulations.