Spey Resources Extracts 99.5% Battery Grade Lithium Carbonate Using Ekosolve™ Process from Our Flagship Candela Ii, Incahuasi Salar Project
SPEY RESOURCES EXTRACTS 99.5% BATTERY GRADE LITHIUM CARBONATE
USING EKOSOLVE™ PROCESS FROM OUR FLAGSHIP CANDELA II, INCAHUASI
SALAR PROJECT
Vancouver, British Columbia —October 31, 2022 — Spey Resources Corp . (CSE: SPEY)
(OTC: SPEYF) (FRA: 2JS) ("Spey” or the "Company") is pleased to provide further information
regarding its recent extraction of 99.5% battery grade lithium carbonate using the Ekosolve™
process. As announced in the Company’s news release dated October 28, 2022, the Chemical
Engineering Department at the University of Melbourne, Australia has successfully produced
lithium carbonate from lithium chloride extracted from the Company’s brines in Incahuasi Salar at
the Candela II Project using the Ekosolve™ process. Spey has acquired the first Ekosolve
production licence, which prioritizes the Company to be the first client to commission Ekosolve to
complete the construction proposal, preliminary and plant engineering and manufacturing of the
plant at Incahuasi. EkoSol ve has issued seven other licences to date and will progressively
commence engineering after Spey engineering is completed.
The brines and the lithium carbonate that was produced are being assayed by an external
laboratory to corroborate the results achieved by the University of Melbourne and the Ekosolve
team. The brine was subjected to 10 phases of continuous processing that took approximately 22
seconds for the solvent to extract the lithium in each phase. The 10 th phase had extracted
135.05gm of contained lithium from 140.23gm, a 96.03% recovery rate. The purity of the lithium
carbonate was set at 99.5% based on the sodium carbonate used to convert the chloride. The
Mg:Li ratio was more than 15:1, and the EkoSolve™ process performed exceptionally well. The
trial was undertaken by Ekosolve Ltd and the University of Melbourne (UoM) chemical
engineering department and reported to Spey.
All sampling received from Spey’s Incahuasi project was sampled by SGS, Leeder Laboratories
in Melbourne, and the UoM Chemical engineering department to validate the lithium content. The
exploration program sampling was subject to a company standard of internal quality control and
quality assurance programs which include the insertion o f certified reference materials, blank
materials and brine duplicate analysis. The total amount of brines analysed was approximately
600 litres. All samples were processed for lithium analysis by ICP-5AM48. UoM, Leeder and SGS
Argentina quality systems all conform to requirements of ISO/IEC Standard 17025 guidelines and
meet assay requirements outlined for NI 43-101. Data verification of the analytical results included
- 2 -
a statistical analysis of the standards and blanks that passed certain parameters for acceptance
to ensure accurate and verifiable results.
The lithium carbonate produced after the B1 sample of 200 litres was processed using the
EkoSolve™ process was analysed using ICP-OES. The lithium concentration in the original brine
and batches 1 to 11 following the 10-stage extraction process were analyzed via ICP-OES. Prior
to analysis, the samples were spiked with 5, 10, 20, 50 and 100 ppm lithium standards to capture
the depressed response due to background interference from the co- ions present. The
relationships between ∆[Li] spiked and measured [Li] for the original brine and batches 1 to 11
brine after the 10-stage extraction are shown with the fitting correlations. These correlations were
used to determine the ‘actual’ concentrations of lithium present in solution. Additionally, the loaded
organic solvents from each stage for the first and last brine batch passing through the process
were stripped (three times to ensure the complete stripping of the loaded metal ions) using water
at aqueous to or ganic (A/O) ratio equal to 1. The stripping solutions were diluted and analyzed
for the amount of metals loaded in the organic phase
Phil Thomas, CEO of the Company, said “we are delighted to achieve these results. This not only
proves the validity of the Ekosolve™ process for Incahuasi brines, but also the fast processing
time using solvent exchange columns. Ekosolve Ltd. is planning to build a 100 tonne mini plant
in Salta and the Company is in active discussions with Ekosolve Ltd. regarding a potential joint
venture opportunity.”
Fig 1 Lithium Carbonate produced Fig 2 Drill Location for Pocitos 2 on Pocitos Salar
by University of Melbourne
Qualified Person
The scientific and technical content of this news release has been reviewed and approved by
Phillip Thomas, BSc. Geol, MBM, FAusIMM, MAIG, MAIMVA(CMV), who is a "qualified person"
for the purposes of National Instrument 43- 101 - Standards of Disclosure for Mineral Projects,
and is CEO of the Company.
About Spey Resources Corp.
- 3 -
Spey Resources is a Canadian mineral exploration company which has an 80% interest in the
Candela II lithium brine project located in the Incahuasi Salar, Salta Province, Argentina. Spey
also holds an option to acquire a 100% undivided interest in Pocitos II and 20% interest in the
Pocitos I lithium projects. Spey also holds interests in four lithium exploration projects located in
the James Bay Region of Quebec. Spey has a 100% interest in the Silver Basin Project located
in the Revelstoke Mining Division of British Columbia as well as an option to acquire a 100%
interest in the Kaslo Silver project, west of Kaslo, British Columbia.
For more information, please contact:
Nader Vatanchi VP Corporate Finance, Director
778-881-4631
Cautionary Note Regarding Forward-Looking Statements
This news release includes forward-looking statements that are subject to risks and uncertainties,
including with respect to production of lithium carbonate, timing for production, building of a 100
tonne mini plant in Salta and potential joint ventur e with Ekosolve Ltd . The Company provides
forward-looking statements for the purpose of conveying information about current expectations
and plans relating to the future and readers are cautioned that such statements may not be
appropriate for other purposes. By its nature, this information is subject to inherent risks and
uncertainties that may be general or specific and which give rise to the possibility that
expectations, forecasts, predictions, projections, or conclusions will not prove to be accurate, that
assumptions may not be correct, and that objectives, strategic goals and priorities will not be
achieved. These risks and uncertainties include but are not limited those identified and reported
in the Company’s public filings under the Company’s SEDAR profile at www.sedar.com. Although
the Company has attempted to identify important factors that could cause actual actions, events,
or results to differ materially from those described in forward- looking information, there may be
other factors that cause actions, events or results not to be as anticipated, estimated or intended.
There can be no assurance that such information will prove to be accurate as actual results and
future events could diffe r materially from those anticipated in such statements. The Company
disclaims any intention or obligation to update or revise any forward-looking information, whether
as a result of new information, future events or otherwise unless required by law.
The Canadian Securities Exchange has neither approved nor disapproved the contents of this
press release.