Awalé Hits 3.3 g/t Gold Equivalent over 38 Metres from First BBM Underground Drilling, Confirming Strong Grades at Depth
Awalé Hits 3.3 g/t Gold Equivalent over 38
Metres from First BBM Underground Drilling,
Confirming Strong Grades at Depth
Highlights
Significant intercepts include:
3.3 g/t gold equivalent ("AuEq.") over 38m (
38m @ 3 g/t gold and 0.5% copper
) from 447m,
including 6.4 g/t AuEq. over 6m (
6m @ 6.4 g/t gold and 0.95% copper
) (BBDD-20)*
2.1 g/t AuEq. over 22m (
22m @ 1.3 g/t gold and 0.84% copper
) from 505m (BBDD-9)
2.0 g/t AuEq. over 42m (
42m @ 1.4 g/t gold and 0.51% copper
) from 459m (BBDD-15)
First results from the underground target at BBM include some of the highest and broadest gold-
copper intercepts returned to date.
Robust gold-copper grades intersected at 400m below surface provide confidence in an emerging
underground potential.
Results from additional step-down diamond drill holes testing to 600m below surface are pending.
MRE on track: BBM is emerging with the potential over time to become one of the largest gold-
copper discoveries in West Africa, with increasing confidence ahead of a Mineral Resource
Estimate targeted for Q2 2026.
*All AuEq. grades calculated assuming 80% metallurgical recovery for all metals.
Toronto, Ontario--(Newsfile Corp. - February 27, 2026) -
Awalé Resources Limited (TSXV: ARIC)
(OTCQX: AWLRF) (FSE: 2F60)
("
Awalé
" or the "
Company
") is pleased to report assay results from
the first six holes of its high-grade underground drilling program at the BBM gold-copper discovery within
the Odienné Project ("
Odienné
" or the "
Project
") in Côte d'Ivoire.
This drilling forms part of an 11-hole, 7,000-metre step-down program designed to test the down-plunge
extension of BBM's high-grade core and evaluate its underground potential down to an initial 600m
vertical depth. Assays for the remaining five holes are pending (see long section and plan map in
Figures 2 and 3).
"It is highly encouraging to see such strong early results that show increasing gold and copper grades at
depth," stated Andrew Chubb, President and CEO of Awalé Resources. "With any discovery, you have
to keep pushing to fully understand the true potential. We believe there is a significant opportunity for
continued growth at BBM, particularly as we are seeing evidence of increasing grades with depth in the
drilling. To date, drilling has demonstrated the open-pit potential at BBM, which now covers a 1.2 km
zone. This new drilling looks to expand the underground potential of this target. With our initial Mineral
Resource Estimate targeted for early Q2, we are beginning to define this zone, and coupled with the
deeper drilling, we are starting to better define the scale of the system."
"We are also looking forward to receiving drilling results from Charger and Empire, along with further
news from our 100%-owned Awalé permits, where the team continues to advance exploration across the
Seydou, Sama, and Sienso permits. 2026 is shaping up to be a big year for the Company."
Link to All Figures
Watch Video of CEO Andrew Chubb Discussing New Results from BBM
Link to Core Photos
BBM Underground Target Drilling
The 11-hole, 7,000-metre step-down diamond drilling program forms the first phase of drilling designed
to evaluate the potential for an underground mineral resource at the BBM target. This initial phase is
focused on testing continuity of the higher-grade core of the BBM system down-plunge to a depth of
approximately 600 metres below surface. Results from the first six holes reported in this release
represent the beginning of defining this underground potential.
If successful, further step-out drilling will be planned to test and extend the higher-grade zone to a depth
of 800m below surface. The gold, copper, and molybdenite mineralization is associated with a marked
increase in strain intensity and silica-biotite alteration along the subvertical to south-southwest contact
between a sheared granodiorite host and footwall metasediments and metavolcanics.
Results from this deeper drilling will play a key role in assessing the long-term scale and underground
development potential of the BBM system.
Exploration on Awalé's 100%-Owned Permits
Concurrent exploration programs are underway across Awalé's 100%-owned permits. Intensive surface
geochemistry programs are advancing at Seydou and Sama, while a 3,000-metre air-core program at
the Fremen target (Sienso) is nearing completion. Positive results are expected to support follow-up
percussion and diamond drilling across the broader Odienné land package with the purpose of making
new discoveries.
About Awalé Resources
Awalé is a diligent and systematic mineral exploration company focused on discovering large high-
grade gold and copper-gold deposits. Exploration activities are currently underway in the underexplored
regions of Côte d'Ivoire, where the Company is exploring the Odienné Copper-Gold Project ("
Odienné
"
or the "
Project
"), covering 2,346 km
2
across seven permits-five granted and two applications. This
includes 797 km
2
in two permits held under the Awalé-Newmont Joint Venture ("OJV"). Awalé currently
manages all exploration activities over the OJV, with funding currently provided by Newmont Ventures
Limited ("Newmont") under an Exploration Agreement signed in May 2022.
Awalé has discovered four gold, gold-copper, and gold-copper-silver-molybdenum mineralized systems
within the OJV and has recently commenced exploration on its 100%-owned properties.
The Odienné Project is underexplored and has multiple pipeline prospects with similar geochemical
signatures to Iron Oxide Copper Gold (
IOCG
) and intrusive-related mineral systems with substantial
upside potential. The Company benefits from a skilled and well-seasoned technical team that allows it to
continue exploring in a pro-mining jurisdiction that offers significant potential for district-scale
discoveries.
Table 1: Significant Intercepts from Diamond Drilling - (from this release)
Hole ID
From
(m)
To
(m)
Width
(m)
Au
(g/t)
Cu
(%)
Ag
(g/t)
Mo
(ppm)
AuEq.
(80%)
Comp.
Trigger
(Au g/t)
BBDD0009
494
527
33.0
1.0
0.59
2.5
194
1.5
0.2
including
505
527
22.0
1.3
0.84
3.6
265
2.1
0.5
and
512
513
1.0
8.0
2.27
7.3
255
9.1
5
BBDD0011
351
359
8.0
0.9
0.20
1.2
14
1.0
0.5
578
599
21.0
0.9
0.32
1.3
137
1.1
0.5
BBDD0013
267
268
1.0
1.0
0.00
0.1
5
0.8
0.5
297
298
1.0
0.7
0.19
0.5
21
0.8
0.5
BBDD0013
299
301
2.0
0.6
0.14
0.6
7
0.6
0.5
BBDD0013
320
346
26.0
0.5
0.36
1.2
78
0.8
0.2
including
322
329
7.0
0.7
0.84
2.8
173
1.6
0.5
and
338
342
4.0
0.9
0.32
1.2
38
1.1
0.5
and
492
496
4.0
0.4
0.16
1.1
13
0.5
0.2
525
530
5.0
0.6
0.15
0.7
116
0.7
0.5
BBDD0015
459
501
42.0
1.4
0.51
2.3
481
2.0
0.5
BBDD0016
118
139
21.0
0.3
0.51
1.9
46
0.9
0.2
BBDD0020
447
486
39.0
2.9
0.50
2.2
594
3.2
0.5
including
447
485
38.0
3.0
0.50
2.2
608
3.3
2
and
458
459
1.0
7.1
0.59
2.2
1153
7.0
5
and
472
478
6.0
6.4
0.95
4.3
471
6.4
5
Table 2: BBM Drill Collar Details - (all collars from this release)
Hole ID
Easting
Northing
RL_M
EOH_M
Azimuth_True
Dip
BBDD0009
655529.6
1048086.2
424.5
608.86
13.4
-66.9
BBDD0011
655359.5
1048125.1
426.0
671.41
17.4
-61.8
BBDD0013
655441.3
1048118.4
425.7
581.15
19.5
-60.9
BBDD0015
655577.9
1048070.8
423.5
528.44
21.2
-62.6
BBDD0016
655410.6
1048288.8
424.3
198.3
29.1
-58.2
BBDD0020
655663.0
1048024.7
419.8
534.9
20.8
-63.5
Quality Control and Assurance
Analytical work for drill samples is being carried out at the independent Intertek Laboratories in Ghana
and Australia, an ISO 17025 Certified Laboratory. Samples are prepared and stored at the Company's
field camps and put into sealed bags until collected by Intertek from the Company's secure Odienné
office and transported by Intertek to their preparation laboratory in Yamoussoukro, Côte d'Ivoire, for
preparation. Samples are logged in the tracking system, weighed, dried, and pulverized to greater than
85%, passing a 75-micron screen. Two pulps are prepared from each sample with one stream to
Intertek Ghana for fire assay and a second to Australia where the sample is analyzed by 52 element
ICP/MS with a 4-Acid digest. Blanks, duplicates, and certified reference material (standards) are being
used to monitor laboratory performance during the analysis. Where visible gold is observed in drill core,
a quartz wash is applied between every sample to reduce or eliminate any contamination. Once fire
assay results are received, samples over 5 g/t gold are routinely screen fire assayed, samples lower
than 5 g/t gold continued within a high-grade interval are also screen fire assayed.
Mineralized Interval Calculations
Significant intervals reported in this news release are calculated as downhole length-weighted
intercepts. For the BBM target, initial mineralized zones are calculated at a 0.2 g/t Au trigger and include
up to 3 metres of internal waste for delineating mineralized zones. Included intervals are calculated at 0.5
g/t Au, 2 g/t Au, 5 g/t Au, and 10 g/t Au trigger values, with up to 3 metres of internal waste. Table 2
contains a list of all BBM holes reported in this release. True widths are estimated to be 70% of the
downhole widths. Holes not reported do not make a 0.5 g/t Au grade trigger.
Au Equivalent Calculations
Au Equivalent is calculated using the following parameters in USD: Au - 1910/Oz (Troy), Cu 3.80/lb, Mo
40,000/Tonne, and Ag 23.40/Oz (Troy). The Formula AuEq = Au (g/t) + ((Cu (ppm) * 0.00014) + (Mo
(ppm) * 0.00065) + (Ag (g/t)*0.01225)). An 80% metallurgical recovery is assumed for all metals, as the
specific recovery rates for individual metals are unclear, and assuming different recoveries would be
premature at this stage.
Qualified Person
The technical and scientific information contained in this news release has been reviewed and approved
for release by Andrew Chubb, the Company's Qualified Person as defined by National Instrument 43-
101. Mr. Chubb is the Company's Chief Executive Officer and holds an Economic Geology degree, is a
Member of the Australian Institute of Geoscientists (AIG), and is a Member of the Society of Economic
Geoscientists (SEG). Mr. Chubb has over 25 years of experience in international mineral exploration and
mining project evaluation.
Abbreviations Used in this Release
Ag
Silver
Au
Gold
AuEq.
Gold equivalent
Cu
Copper
g/t
Grams per tonne
km
Kilometres
m
Metres
Mo
Molybdenum
ppm
Parts per million
AWALÉ Resources Limited
On behalf of the Board of Directors
"Andrew Chubb"
Chief Executive Officer
FOR FURTHER INFORMATION, PLEASE CONTACT:
Andrew Chubb, CEO
(+356) 99139117
Ardem Keshishian, VP Corporate Development
+1 (416) 471-5463
The Company's public documents may be accessed at
www.sedarplus.ca
. For further information on the
Company, please visit our website at
www.awaleresources.com
.
Forward-Looking Information
This news release contains forward-looking information within the meaning of Canadian securities
laws (collectively "forward-looking statements"). Forward-looking statements are typically identified by
words such as: believe, expect, anticipate, intend, estimate, plans, propose, potential, postulate and
similar expressions, or are those, which, by their nature, refer to future events. All statements that are
not statements of historical fact are forward-looking statements. Forward-looking statements in this
news release include but are not limited to statements regarding the Company's presence in Côte
d'Ivoire and ability to achieve results, creation of value for Company shareholders, achievements
under the Newmont JV, works on other properties, timing and extent of planned drilling, expectations
to achieve a first mineral resource estimate and preliminary economic assessment, advancing
towards a pre-feasibility study, potential for new discoveries, timing for providing assay results,
commencement of operations. Although the Company believes any forward-looking statements in this
news release are reasonable, it can give no assurance that the expectations and assumptions in such
statements will prove to be correct. Factors that could cause actual results to differ materially from
such forward-looking information include, but are not limited to, the results of the proposed drilling
programs, the number of drilling rigs on site, changes in the state of equity and debt markets,
fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals,
and other risks involved in the mineral exploration and development industry, including those risks
set out in the Company's management's discussion and analysis as filed under the Company's
profile at
www.sedarplus.ca
. Forward-looking information in this news release is based on the opinions
and assumptions of management considered reasonable as of the date hereof, including that all
necessary governmental and regulatory approvals will be received as and when expected and that the
proposed drilling program will proceed as planned. Although the Company believes that the
assumptions and factors used in preparing the forward-looking information in this news release are
reasonable, undue reliance should not be placed on such information. The Company disclaims any
intention or obligation to update or revise any forward-looking information, other than as required by
applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/285607