Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

ANOR.V ·

Hudson Resources Announces the Development of CO2 Free White Cement Using the White Mountain Anorthosite

Corporate Updates

Suite 420 – 1639 2nd Ave W. Tel: (604) 628-5002

Vancouver, B.C. V6J 1H3 Fax: (877) 413-0119

FOR IMMEDIATE RELEASE TSX-V: HUD

January 22, 2018 OTC: HUDRF

NR2018-01

HUDSON RESOURCES ANNOUNCES THE DEVELOPMENT OF CO2 FREE

WHITE CEMENT USING THE WHITE MOUNTAIN ANORTHOSITE

Vancouver, BC - HUDSON RESOURCES INC. (the “Company”) – (TSX Venture Exchange “HUD”;

OTC “HUDRF”) is pleased to announce that it has now completed initial research and development

activities and has confirmed that the White Mountain anorthosite (calcium feldspar) can be used to

make a CO2 free, heat-resistant, acid-resistant, white cement. Hudson believes this cement has

numerous potential applications including white or coloured architectural concrete, fibre reinforced

cement, refractory castable pieces, fire-proof building materials, and hazardous waste containment.

Hudson has been working with researchers at The University of British Columbia’s Ceramics and

Refractories Research and Testing Laboratory (UBCeram) for the past year using the White Mountain

anorthosite to create Chemically Bonded Anorthosite Cements (CBAC), Concretes and Composites.

Hudson has branded the new anorthosite concrete as AnoCrete.

In the spring of 2016, based on research from existing phosphate cements, Hudson discovered that by

adding phosphoric acid to its crushed anorthosite, a cementitious material could be created at room

temperature. In comparison, Ordinary Portland Cement (OPC) requires the high temperature

processing of limestone which releases a significant amount of CO2 into the atmosphere.

According to the Cement Sustainability Initiative, the cement industry causes five percent of global

man-made CO2 emissions annually. Every tonne of Portland cement produced contributes 0.9 tonnes

of CO2 to the environment. The CO2 emissions generated in the production of Hudson’s anorthosite

cement are limited to the contribution from the production of the anorthosite (mainly crushing and

transportation of ore) and the production of phosphoric acid (estimated as low, neutral or in some cases

negative when using modern technologies -https://www.researchgate.net/publication/235704822).

The main objective of Hudson’s research to date has been to develop a sustainable, low to zero CO2

cement with superior appearance (white colour) and heat and acid resistance in comparison to OPC.

The research has achieved excellent results in a very short period of time. Initial research was

completed at McGill University in Montreal. In the summer of 2017, UBCeram, in conjunction with

Hudson, was awarded a Natural Sciences and Engineering Research Council of Canada (NSERC)

grant to conduct research and define a path to commercialization.

Testing to date has successfully demonstrated that AnoCrete exceeds the OPC minimum ASTM C150

compressive strength of 28MPa after 28 days. The properties of AnoCrete are effected by ambient

heat, the amount of added phosphoric acid and the particle size of the anorthosite. Additional research

is ongoing to perfect the mix and determine how various additives can be used to improve performance

characteristics.

UBCeram research has identified a number of key properties which support Anocrete being a premium

product, including:

• Low to net zero CO2 emission

• High whiteness

• High durability (insoluble in water and acidic solutions, resistant to sulphate solutions)

• Potential to produce a lightweight cement

• Strength comparable to OPC

• High heat resistance (up to 1200°C before it started to turn into glass).

• Alkali, thermal shock, and abrasion resistant

Suite 420 – 1639 2nd Ave W. Tel: (604) 628-5002

Vancouver, B.C. V6J 1H3 Fax: (877) 413-0119

James Tuer, Hudson’s President, stated, “We are very excited about the prospects of developing an

environmentally sustainable white cement. This process only works because of the unique nature of the

White Mountain anorthosite. We envision a number of applications where AnoCrete can outperform

existing white cements where an environmentally sustainable cement is desired, a bright white colour is

preferred, or where high temperature and acid resistance is needed. We are continuing to work with

UBCeram this year to advance this exciting new product line.”

Hudson believes AnoCrete may be used in the following applications;

• Structural cements such as white architectural cement concrete, heat-reflecting cement for warm

climates, marine cement, borehole sealant for deep oil and gas wells, and premixed just-add-water

cement for homeowners

• Cost effective, hard and chemically resistant ceramic components such as countertops and tiles

• High temperature materials such as monolithic and castable refractories for the metal industry,

insulating firebricks and foams, fireproof panels

• Lightweight acid resistant composite materials compatible with E-glass and steel fibres

• Encapsulation of nuclear waste including Caesium, Strontium, Barium and Technetium

• Stabilization of hazardous waste such as mine tailings, municipal solid waste, industrial sludge,

contaminated soils, and smelter slags

These applications are all high value cements in comparison with OPC. For example, white cement

commands a significant premium over grey OPC. Increases in carbon taxes (Canada recently

announced a carbon tax of $50 per tonne by 2022) can be expected to significantly increase OPC

prices. Hudson believes that AnoCrete can be more than price competitive with these OPC-based high

value cements while having a net zero CO2 impact.

This development further diversifies the White Mountain anorthosite’s potential revenue streams.

Hudson now envisages the anorthosite product being used in the manufacture of structural E-Glass

fibre, as a filler and extender in paints and plastics, as a primary feed material in the production of

alumina and as a source of CO2 free white cement.

Hudson is currently completing the construction of the White Mountain project on the west coast of

Greenland with production forecast for the second half of 2018. Through it’s wholly-owned subsidiary,

Hudson Greenland A/S, Hudson owns 100 percent of the White Mountain project. The company was

granted a 50-year mining license in 2016. Photos of the 2017 construction activities have been updated

on Hudson’s website: hudsonresources.ca/gallery.asp

ON BEHALF OF THE BOARD OF DIRECTORS

“James Tuer”

James Tuer, President

For further information:

James Tuer, President

Ph: 604-628-5002 or 604-688-3415

[email protected]

Suite 420 – 1639 2nd Ave W. Tel: (604) 628-5002

Vancouver, B.C. V6J 1H3 Fax: (877) 413-0119

Forward-Looking Statements

This news release includes certain forward-looking statements or information. All statements other than statements of

historical fact included in this news release, including, without limitation, statements regarding the use of proceeds from the

private placement, and other future plans and objectives of the Company are forward-looking statements that involve various

risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results and

future events could differ materially from those anticipated in such statements. Important factors that could cause actual

results to differ materially from the Company's plans or expectati ons include market prices, general economic, market or

business conditions, regulatory changes, timeliness of government or regulatory approvals and other risks detailed herein and

from time to time in the filings made by the Company with securities regula tors. The Company expressly disclaims any

intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events

or otherwise except as otherwise required by applicable securities legislation.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX

Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.