Arizona Metals Intersects VMS Mineralization 300 Metres North of Kay Mine Deposit
Arizona Metals Intersects VMS
Mineralization 300 Metres North of Kay
Mine Deposit
TORONTO--(BUSINESS WIRE)--January 17, 2023--Arizona Metals Corp. (TSX:AMC,
OTCQX:AZMCF) (the “Company” or “Arizona Metals”) is pleased to announce that step-out
drilling located 300 metres north and on strike of its Kay Mine Deposit has intersected a new
zone of copper-gold VMS mineralization, at depths ranging from 150 to 600 metres vertically
below surface. The new zone is open in all directions, with drilling currently underway to test for
extensions and thickening of the mineralization encountered to date.
The Company is also pleased to report six additional holes from the Kay Mine Deposit, including
three infill and three extensional holes.
The Company is fully-funded (with $58 million in cash at Sept 30, 2022) to complete the
remaining 8,500 meters planned for the Phase 2 program at Kay Mine Deposit (budgeted at $3.6
million), as well as an additional 76,000 meters in the Phase 3 program (budgeted at $32
million), which will be used to test the numerous parallel targets heading west of the Kay Mine
Deposit, as well as possible northern and southern extensions.
Drilling Highlights
North Strike Extensional Drilling: Hole KM-22-93 intersected four separate intervals of
VMS mineralization over a vertical extent of approximately 140 m (from 470 m to 610 m
vertically below surface), including 4.5 m at a grade of 1.8% CuEq, 2.0 m grading
1.5% CuEq, 4.6 m grading 0.8% CuEq, and 1.2 m grading 2.7% CuEq. This hole is
approximately 300 m below hole KM-22-30, which intersected 3.0 m grading 1.1%
CuEq, and 400 m below KM-22-33, which intersected 1.2 m grading 4.2% CuEq. (See
Table 1, below for constituent elements, grades, metals prices and recovery assumptions
used for CuEq % calculations. Analyzed Metal Equivalent calculations are reported for
illustrative purposes only). Mineralization is open in all directions around these
intercepts. This hole extends the strike of mineralization approximately 300 m from the
northernmost Kay Mine Deposit drill intercept.
Kay Mine Deposit Drilling: KM-22-81B intersected 3.8 m grading 10.7% CuEq from
750 m. This is a step-out hole to the south, which extended mineralization about 50 m
south of hole KM-21-52A along the southern edge of the Kay Mine Deposit.
Marc Pais, CEO, commented “The drill results reported today, located 300 metres north of the
Kay Mine Deposit, confirm our opinion that the Kay Mine Deposit is potentially part of a much
larger mineralized system, typical of what is encountered in other VMS camps around the world.
We expect that infill and extensional drilling at the Kay Mine Deposit will continue to expand
and improve confidence in its size potential.
Initial testing around the Central Target, from pad 7 has also encountered some encouraging
results, with numerous markers typically associated with VMS deposits. These include thick
zones of graphite mineralization interbedded with anomalous levels of pathfinder elements,
particularly zinc. Drilling will continue at the Central Target, from pads C1 and C2, which we
believe are better positioned to test the anomaly, using the results reported today as vectors in
seeking additional VMS mineralization.
Road construction is well underway to reach drill locations that will test the Western Target,
located 1,200 m west of the Kay Mine Deposit, with drilling expected to commence here in
Q1’2023. Work will continue at the Kay Mine Deposit to define an initial resource, in
conjunction with associated hydrological, rock geochemistry, metallurgical, and specific gravity
studies, but we anticipate that over the next 18 months approximately 90% of our budget will go
towards exploration south, north, and west of the Kay Mine Deposit.”
Drilling Details—Kay Mine Deposit
Recent drilling at the Kay Mine Deposit has focused mainly on step-out holes to probe the extent
of mineralization.
KM-22-81B intersected 3.8 m grading 10.7% CuEq (incl. 1.5m grading 14.8% CuEq)
from 750 m and three other thinner intercepts below. This is a step-out hole to the south,
which extended mineralization about 50 m south of hole KM-21-52A along the southern
edge of the deposit.
KM-22-81C returned four intervals, the best of which graded 3.2 m @ 1.6% CuEq and
8.1 m @ 0.8% CuEq. These occur within a larger 49.5-m-thick mineralized envelope
grading 0.35% CuEq. This hole extended mineralization about 30 m south of hole 52 on
the south edge of the deposit. Mineralization is open to the south of hole 81C.
KM-22-86A intersected three intervals, including 1.1 m @ 0.67% CuEq. This step-out
hole extended mineralization 40 m south of hole 10C along the shallow southern edge of
the deposit. Hole 86A was a branch hole drilled to extend hole 86, which was lost when it
intersected historic mine workings.
Drilling Details—Kay North Strike Extension
Drilling along strike of the Kay Mine Deposit has extended the mineralized horizon
approximately 300 m to the north.
KM-22-82: results from additional sampling returned 2.4 m @ 1.3% CuEq, extending
mineralization approximately 75 m north of hole KM-20-03 in the North Zone of the Kay
Mine Deposit.
KM-22-87 intersected 8.2 m @ 0.5% CuEq, including 0.6 m @ 1.8% CuEq and
extended mineralization approximately 100 m north of hole KM-20-03 on the north edge
of the Kay Mine Deposit.
KM-22-88 hosted 0.9 m @ 2.7% CuEq, which demonstrates continuity of
mineralization within the 100 m north step-out achieved by hole 87.
KM-22-89 intersected 1.4 m @ 1.2% CuEq; this locates the Kay Mine Deposit
mineralized horizon about 100 m north of hole 19, and demonstrates depth potential in
this area at a vertical depth of approximately 390 m below surface.
Hole KM-22-93 intersected four separate intervals of VMS mineralization over a vertical
extent of approximately 140 m (from 470 m to 610 m vertically below surface), including
4.5 m at a grade of 1.8% CuEq, 2.0 m grading 1.5% CuEq, 4.6 m grading 0.8%
CuEq, and 1.2 m grading 2.7% CuEq. This hole is approximately 300 m below hole
KM-21-30, which intersected 3.0 m grading 1.1% CuEq, and 400 m below KM-21-33,
which intersected 1.2 m grading 4.2% CuEq. Mineralization is open in all directions
around these intercepts. This hole extends the strike of mineralization approximately 300
m from the northernmost Kay Mine Deposit drill intercept, and points to depth potential
along the north strike extension.
Kay Mine Project Phase 2 Drill Program Update
With the assayed holes released today, the Company has completed a total of 74,800 meters at
the Kay Mine Project since inception of drilling. The Company is fully-funded to complete the
remaining 8,500 meters planned for the Phase 2 program with the priority focus areas for
upcoming drilling (shown in Figure 1 above) as well as an additional 76,000 meters in the
upcoming Phase 3 program (Figures 3 and 4 below).
Kay Mine Project Phase 3 Drill Program Update – Moving to Central and Western Targets
The Phase 3 drill program will test the numerous parallel targets heading west of the Kay Mine
Deposit, as well as the possible northern and southern extensions. The road to the Central Target
(located 300 m west of the Kay Mine Deposit) is complete, and drilling at the Central Target
pads commenced during November 2022.
A total of six holes were drilled to the west from pad 7 (see Figure 3), but due to the westerly dip
of the stratigraphy and the Central Target EM anomaly, these holes did not fully test the Central
Target. Results from these six holes, along with updated structural mapping and ground-loop EM
geophysics, will be used to refine the drill targeting from pads C1 and C2. The location of these
pads will provide much better angles to intersect the core of the Central Target, while also testing
for its extensions north and south along strike of the mafic-felsic contact that potentially hosts
mineralization.
Permitting is complete for drill pads at the Western Target (W1 and W2, located ~1,000 m west
of the Kay Mine Deposit), with road construction approximately half completed, and drilling
anticipated to start in Q1’23.
Table 1. Results of Phase 2 Drill Program at the Kay Mine Project, Yavapai County, Arizona
announced in this news release.
Analyzed Grade Analyzed Metal
Equivalent
Metal Equivalent
Hole ID From m
To
m
Length
m Cu %
Au
g/t Zn %
Ag
g/t Pb %
Cu
eq %
Au eq
g/t
Zn
eq%
Cu
eq %
Au eq
g/t
Zn
eq%
KM-22-
73
no significant
assays
KM-22-
76
no significant
assays
KM-22-
77
no significant
assays
KM-22-
81B 801.8 805.6 3.8 9.60 1.81 1.83 44.6 0.23 11.81 19.36 30.72 10.65 17.45 27.70
including 802.7 804.2 1.5 14.80 2.75 2.06 53.0 0.28 17.75 29.10 46.18 16.03 26.27 41.69
KM-22-
81B 815.0 816.0 0.9 0.93 0.56 0.49 28.0 0.21 1.72 2.82 4.48 1.47 2.41 3.83
KM-22-
81B 821.6 823.0 1.4 0.02 0.03 1.92 28.0 0.40 1.09 1.78 2.83 0.95 1.56 2.47
KM-22-
81B 836.5 837.3 0.8 0.05 0.74 0.69 15.0 0.46 0.99 1.62 2.57 0.79 1.29 2.04
KM-22-
81C 751.5 754.7 3.2 1.14 0.43 0.56 19.6 0.07 1.79 2.94 4.66 1.57 2.57 4.08
KM-22-
81C 775.9 784.0 8.1 0.21 0.13 1.01 18.8 0.22 0.88 1.44 2.29 0.76 1.25 1.99
KM-22-
81C 787.0 788.5 1.5 0.03 2.02 1.80 30.0 0.39 2.27 3.73 5.92 1.77 2.91 4.61
KM-22-
82 301.8 304.2 2.4 1.18 0.37 0.13 2.6 0.02 1.48 2.42 3.84 1.32 2.16 3.42
KM-22-
83
no significant
assays
KM-22-
84
no significant
assays
KM-22-
86
lost hole
KM-22-
86A 545.9 546.6 0.7 0.14 0.51 0.14 16.0 0.26 0.69 1.14 1.80 0.54 0.89 1.41
KM-22-
86A 563.7 564.8 1.1 0.04 1.11 0.05 13.0 0.11 0.86 1.42 2.25 0.63 1.03 1.63
KM-22-
86A 565.6 566.7 1.1 0.05 0.15 0.92 25.9 0.43 0.80 1.30 2.07 0.67 1.10 1.74
KM-22-
87 339.9 348.1 8.2 0.29 0.31 0.23 2.0 0.01 0.59 0.96 1.53 0.50 0.82 1.30
including 339.9 340.5 0.6 1.89 0.09 0.04 4.0 0.02 1.99 3.26 5.17 1.83 3.00 4.76
KM-22-
88 344.7 345.6 0.9 2.84 0.07 0.06 2.0 0.02 2.93 4.80 7.61 2.71 4.44 7.04
KM-22-
89 447.1 448.5 1.4 1.09 0.29 0.06 5.8 0.11 1.36 2.23 3.53 1.21 1.99 3.15
KM-22-
93 478.7 483.3 4.5 1.85 0.03 0.02 4.6 0.00 1.91 3.13 4.97 1.77 2.90 4.60
KM-22-
93 506.6 508.6 2.0 1.63 0.01 0.01 2.2 0.00 1.66 2.72 4.32 1.54 2.52 4.01
KM-22-
93 522.4 527.0 4.6 0.85 0.07 0.02 2.6 0.00 0.92 1.51 2.39 0.84 1.38 2.18
KM-22-
93 615.1 616.3 1.2 2.85 0.04 0.06 5.0 0.00 2.94 4.81 7.64 2.72 4.45 7.07
The true width of mineralization is estimated to be 50% to 99% of reported core width, with an
average of 76%. (2) Assumptions used in USD for the copper and gold Metal Equivalent
calculations were metal prices of $4.63/lb Copper, $1937/oz Gold, $25/oz Silver, $1.78/lb Zinc,
and $1.02/lb Pb. Assumed metal recoveries (rec.), based on a preliminary review of historic data
by SRK and ProcessIQ1, were 93% for copper, 92% for zinc, 90% for lead, 72% silver, and 70%
for gold. The following equation was used to calculate copper equivalence: CuEq = Copper (%)
(93% rec.) + (Gold (g/t) x 0.61)(72% rec.) + (Silver (g/t) x 0.0079)(72% rec.) + (Zinc (%) x
0.3844)(93% rec.) +(Lead (%) x 0.2203)(93% rec.). The following equation was used to
calculate gold equivalence: AuEq = Gold (g/t)(72% rec.) + (Copper (%) x 1.638)(93% rec.) +
(Silver (g/t) x 0.01291)(72% rec.) + (Zinc (%) x 0.6299)(93% rec.) +(Lead (%) x 0.3609)(93%
rec.). Analyzed Metal Equivalent calculations are reported for illustrative purposes only. The
metal chosen for reporting on an equivalent basis is the one that contributes the most dollar value
after accounting for assumed recoveries.
Table 2. Full results of Phase 2 Drill Program at the Kay Mine Deposit, Yavapai County,
Arizona.
Analyzed Grade Analyzed Metal
Equivalent
Metal Equivalent
Hole ID From m
To
m
Length
m Cu %
Au
g/t Zn % Ag g/t Pb %
Cu
eq % Au eq g/t
Zn
eq%
Cu
eq % Au eq g/t
Zn
eq%
KM-21-
17 429.5 449.9 20.4 1.81 1.10 1.20 21.2 0.17 3.14 5.15 8.18 2.73 4.47 7.10
including 429.5 434.0 4.6 4.61 1.73 1.91 29.1 0.24 6.68 10.96 17.39 5.92 9.70 15.39
including 432.7 434.0 1.4 0.52 6.81 8.29 40.0 1.10 8.41 13.79 21.89 6.76 11.09 17.60
KM-21-
17 504.4 505.4 0.9 1.19 4.73 0.05 9.0 0.00 4.17 6.83 10.84 3.20 5.24 8.31
KM-21-
18 404.3 429.8 25.5 0.35 0.86 1.71 15.8 0.23 1.71 2.80 4.44 1.43 2.35 3.72
including 408.6 410.6 2.0 0.50 2.22 7.25 64.4 0.82 5.33 8.74 13.87 4.51 7.39 11.72
including 424.9 427.3 2.4 1.60 2.59 3.16 18.0 0.52 4.66 7.64 12.12 3.92 6.43 10.21
KM-21-
18A 391.4 423.8 32.5 1.09 0.62 1.25 17.7 0.15 2.13 3.48 5.53 1.85 3.04 4.82
including 393.3 395.8 2.4 9.57 2.83 2.72 40.9 0.28 12.73 20.87 33.12 11.36 18.63 29.56
KM-21-
19 377.8 378.3 0.5 3.39 5.59 6.83 128.0 0.63 10.58 17.34 27.52 8.81 14.44 22.92
KM-21-
20 442.7 443.6 0.9 2.56 0.52 3.52 18.5 0.14 4.40 7.22 11.45 3.98 6.52 10.34
KM-21-
20 456.0 458.1 2.1 1.49 0.35 0.14 6.0 0.04 1.81 2.97 4.71 1.63 2.66 4.23
KM-21-
21 452.6 495.5 42.8 0.80 0.78 1.52 15.1 0.15 2.01 3.29 5.22 1.73 2.83 4.49
including 488.7 493.5 4.8 0.26 2.50 6.13 27.6 0.54 4.48 7.34 11.65 3.74 6.13 9.73
KM-21-
21A 422.0 431.4 9.4 1.17 0.57 2.25 8.6 0.36 2.53 4.15 6.58 2.25 3.68 5.85
KM-21-
21A 439.1 502.1 63.0 0.45 1.28 3.14 58.8 0.77 3.08 5.04 8.00 2.57 4.21 6.67
including 465.0 481.9 16.9 0.52 2.45 4.05 80.9 0.99 4.43 7.26 11.53 3.62 5.94 9.42
KM-21-
22 679.4 682.8 3.4 0.79 0.95 0.06 12.0 0.01 1.49 2.44 3.87 1.23 2.01 3.20
KM-21-
23 394.4 401.4 7.0 0.36 0.93 1.94 13.5 1.17 2.05 3.35 5.32 1.73 2.84 4.51
KM-21-
23 438.6 459.2 20.6 0.17 1.18 1.93 27.8 0.37 1.94 3.17 5.03 1.58 2.59 4.11
KM-21-
24 501.2 592.1 90.8 0.45 1.33 3.42 44.6 0.41 3.02 4.95 7.86 2.53 4.15 6.59
including 501.2 521.7 20.4 1.34 1.70 6.35 113.1 0.66 5.86 9.60 15.24 4.99 8.18 12.99
including 520.9 521.7 0.8 1.75 16.50 9.55 574.0 1.22 20.31 33.29 52.82 15.57 25.52 40.50
including 575.9 592.1 16.2 0.16 2.50 6.00 44.4 0.79 4.51 7.40 11.74 3.75 6.14 9.74
including 588.7 590.4 1.7 0.47 9.98 23.70 18.2 0.13 15.84 25.96 41.20 13.21 21.65 34.36
KM-21-
25 662.6 741.3 78.6 1.41 2.33 2.79 43.4 0.35 4.33 7.10 11.26 3.61 5.92 9.40
including 663.2 672.7 9.4 8.06 1.84 1.31 92.3 0.15 10.45 17.13 27.18 9.30 15.24 24.19
including 693.0 703.9 11.0 0.68 6.28 10.40 99.7 1.17 9.56 15.66 24.86 7.79 12.77 20.27
KM-21-
25A 654.7 719.9 65.2 1.04 1.94 2.15 18.9 0.18 3.25 5.32 8.44 2.71 4.43 7.04
including 655.5 662.8 7.3 3.66 2.09 1.85 30.2 0.21 5.93 9.73 15.44 5.17 8.47 13.44
including 710.8 716.9 6.1 2.72 7.95 3.73 37.4 0.31 9.37 15.36 24.38 7.52 12.33 19.56
KM-21-
25B 647.2 648.9 1.7 0.13 0.58 2.41 62.1 0.64 2.04 3.35 5.31 1.70 2.79 4.42
KM-21-
25B 655.6 659.9 4.3 0.93 0.91 0.91 25.3 0.19 2.07 3.40 5.40 1.75 2.88 4.56
KM-21-
25B 666.0 667.8 1.8 0.60 0.72 2.98 33.5 0.43 2.55 4.18 6.63 2.20 3.61 5.72
KM-21-
25B 673.3 674.7 1.4 0.08 2.10 2.39 23.0 0.33 2.53 4.15 6.58 2.01 3.29 5.23
KM-21-
25B 681.2 682.6 1.4 0.09 1.54 2.98 11.0 0.35 2.34 3.83 6.08 1.93 3.16 5.01
KM-21-
26 506.7 582.8 76.0 0.79 1.61 4.23 32.7 0.54 3.78 6.19 9.83 3.21 5.27 8.36
including 511.1 526.1 14.9 0.73 1.78 9.68 43.3 0.77 6.05 9.92 15.74 5.26 8.63 13.69
including 573.8 582.8 9.0 4.02 6.06 3.32 18.2 0.19 9.18 15.04 23.87 7.64 12.52 19.87
KM-21-
27 706.8 738.2 31.4 1.58 0.16 0.69 9.0 0.06 2.03 3.33 5.28 1.85 3.03 4.80
KM-21-
27 764.4 777.4 13.0 2.85 0.48 0.17 8.5 0.02 3.29 5.39 8.55 2.97 4.87 7.73
KM-21-
27A 666.3 769.4 103.1 0.79 1.06 1.90 35.8 0.42 2.54 4.17 6.62 2.15 3.52 5.59
including 666.3 687.0 20.7 3.21 1.39 1.26 19.4 0.20 4.74 7.77 12.33 4.18 6.84 10.86
including 706.4 724.6 18.3 0.69 2.69 4.70 92.2 1.21 5.13 8.41 13.35 4.22 6.91 10.97
including 752.9 763.8 11.0 0.07 1.07 4.68 95.3 0.98 3.49 5.73 9.09 2.92 4.78 7.59
KM-21-
27B 665.8 762.9 97.1 1.31 1.62 3.21 31.7 0.40 3.88 6.35 10.08 3.31 5.42 8.61
including 702.0 723.0 21.0 0.87 4.56 9.03 81.5 1.10 8.01 13.13 20.83 6.63 10.87 17.25
including 723.0 738.2 15.2 4.97 0.36 0.42 18.7 0.05 5.51 9.03 14.33 5.04 8.26 13.11
KM-21-
28 640.7 694.9 54.3 1.87 2.85 5.03 29.4 0.70 5.93 9.72 15.43 5.04 8.26 13.12
including 660.2 671.6 11.4 0.54 4.29 9.30 32.2 1.17 7.24 11.87 18.84 6.04 9.89 15.70
including 681.1 689.0 7.9 4.39 9.47 10.34 93.1 2.41 15.42 25.27 40.10 12.80 20.98 33.29
including 690.4 692.6 2.2 16.06 0.82 0.06 55.8 0.01 17.02 27.90 44.28 15.62 25.61 40.64
KM-21-
29 393.0 393.8 0.8 0.43 1.54 4.92 9.0 0.21 3.38 5.54 8.79 2.89 4.74 7.53
KM-21-
30 264.9 267.9 3.0 1.18 0.02 0.01 1.5 0.00 1.21 1.98 3.15 1.12 1.83 2.91
KM-21-
32 316.4 320.0 3.7 1.84 1.29 2.47 38.5 0.30 3.95 6.47 10.27 3.41 5.60 8.88
KM-21-
32 342.9 345.9 3.0 0.67 0.52 2.70 13.0 0.15 2.16 3.54 5.62 1.90 3.12 4.95
KM-21-
32 358.9 368.4 9.4 0.60 1.47 1.99 45.7 0.35 2.70 4.42 7.01 2.22 3.63 5.76
KM-21-
33 171.3 172.5 1.2 3.79 0.45 0.21 63.0 0.17 4.69 7.68 12.19 4.19 6.86 10.89
KM-21-
34 299.3 303.9 4.6 0.29 1.69 0.94 46.3 0.26 2.12 3.47 5.50 1.65 2.70 4.29
KM-21-
34 309.7 310.9 1.2 2.27 0.56 1.55 19.9 0.08 3.38 5.54 8.80 3.03 4.96 7.87
KM-21-
35 609.6 615.1 5.5 0.92 1.26 1.71 57.7 0.02 2.80 4.60 7.29 2.33 3.82 6.06
including 609.6 613.0 3.4 1.39 1.69 1.98 54.0 0.01 3.61 5.92 9.40 3.03 4.96 7.87
KM-21-
38 406.5 407.8 1.4 0.60 1.08 9.41 4.0 0.25 4.96 8.13 12.90 4.42 7.24 11.49
KM-21-
38 467.4 476.1 8.7 0.09 1.73 3.87 61.1 1.22 3.38 5.55 8.80 2.78 4.56 7.23
including 470.0 475.2 5.2 0.12 2.44 5.68 87.5 1.79 4.88 8.01 12.71 4.02 6.59 10.46
KM-21-
40 589.8 613.8 24.0 4.98 0.61 0.98 23.4 0.45 6.01 9.86 15.65 5.46 8.95 14.21
including 589.8 597.9 8.1 7.63 0.43 0.39 27.1 0.17 8.30 13.60 21.58 7.61 12.47 19.78
KM-21-
40 627.9 680.8 52.9 0.47 2.91 3.40 35.7 0.40 3.93 6.44 10.22 3.17 5.20 8.25
including 641.1 648.3 7.2 1.15 7.66 8.27 88.5 0.92 9.90 16.23 25.76 7.95 13.03 20.68
including 670.3 674.1 3.8 1.53 10.89 9.47 24.6 0.61 12.15 19.91 31.59 9.69 15.88 25.19
KM-21-
41 462.6 559.3 96.7 1.04 1.54 2.66 40.8 0.35 3.41 5.59 8.86 2.87 4.71 7.47
including 503.2 514.2 11.0 0.99 5.34 8.17 106.3 1.63 8.59 14.08 22.35 7.02 11.51 18.26
including 546.7 558.1 11.4 5.86 5.83 3.24 185.4 0.04 12.14 19.90 31.58 10.15 16.64 26.40
including 553.1 556.9 3.8 7.11 9.55 5.70 505.8 0.09 19.16 31.41 49.84 15.62 25.59 40.62
KM-21-
42 803.5 810.3 6.9 0.05 1.60 1.58 64.3 0.35 2.22 3.64 5.78 1.73 2.83 4.49
KM-21-
42 835.5 839.7 4.3 0.63 2.46 2.15 21.7 0.21 3.18 5.20 8.26 2.56 4.20 6.67
KM-21-
42 853.7 854.7 0.9 0.11 1.63 2.88 28.0 0.40 2.52 4.13 6.55 2.05 3.37 5.34
KM-21-
42A 786.7 787.6 0.9 0.03 3.61 2.18 17.0 0.70 3.36 5.51 8.74 2.58 4.22 6.70
KM-21-
42A 805.4 811.1 5.6 6.17 0.92 0.18 39.5 0.01 7.12 11.68 18.53 6.43 10.54 16.72
including 807.0 808.9 2.0 10.72 0.87 0.11 61.8 0.00 11.79 19.32 30.66 10.74 17.60 27.93
KM-21-
42A 840.9 877.2 36.3 0.55 0.62 1.35 10.7 0.13 1.56 2.56 4.06 1.34 2.20 3.49
KM-21-
42B 808.0 811.2 3.2 0.29 2.06 5.77 63.0 0.94 4.47 7.33 11.63 3.74 6.13 9.72
KM-21-
42B 816.9 819.9 3.0 2.31 0.66 1.23 16.0 0.15 3.35 5.49 8.71 2.99 4.90 7.77
KM-21-
42B 835.5 840.8 5.3 0.02 0.73 2.93 13.5 0.24 1.75 2.87 4.56 1.49 2.45 3.88
KM-21-
42C 849.2 877.4 28.2 3.81 0.47 0.29 12.5 0.09 4.32 7.08 11.24 3.93 6.44 10.23
including 849.2 854.7 5.5 14.57 0.66 0.16 37.5 0.03 15.34 25.14 39.89 14.11 23.12 36.70
including 863.8 869.4 5.6 2.29 1.17 0.59 13.1 0.25 3.39 5.55 8.81 2.96 4.85 7.70
including 874.8 877.4 2.6 2.83 0.26 0.03 7.2 0.01 3.06 5.02 7.96 2.80 4.59 7.28
KM-21-
42C 886.1 889.1 3.0 0.87 0.88 0.50 5.2 0.05 1.65 2.71 4.30 1.40 2.30 3.65
KM-21-
43 583.7 607.1 23.4 0.39 0.25 3.68 3.1 0.02 1.98 3.25 5.15 1.79 2.93 4.65
including 598.9 599.8 0.9 0.50 0.18 11.30 3.0 0.03 4.99 8.17 12.97 4.56 7.48 11.87
KM-21-
43 616.0 633.1 17.1 1.81 0.17 0.14 8.2 0.03 2.04 3.34 5.31 1.86 3.05 4.84
including 631.2 633.1 1.8 6.30 0.61 0.09 25.0 0.01 6.91 11.32 17.97 6.30 10.32 16.38
KM-21-
44 353.4 377.3 23.9 0.34 0.97 2.52 18.3 0.33 2.12 3.47 5.50 1.79 2.93 4.65
including 354.0 356.6 2.6 0.23 2.14 7.97 38.9 0.68 5.06 8.29 13.15 4.30 7.05 11.19
KM-21-
45 459.6 463.0 3.4 0.32 0.62 6.63 82.3 0.87 4.10 6.71 10.65 3.55 5.82 9.24
including 461.2 462.1 0.9 0.15 1.23 16.90 182.0 2.50 9.39 15.38 24.41 8.17 13.39 21.26
KM-21-
46 350.4 362.9 12.4 0.66 2.61 3.69 40.6 0.39 4.08 6.69 10.61 3.34 5.48 8.70
including 350.4 353.3 2.8 0.77 5.19 6.83 107.0 0.72 7.58 12.42 19.70 6.11 10.01 15.88
KM-21-
47 433.9 435.9 2.0 0.16 1.88 9.28 138.7 2.17 6.46 10.58 16.79 5.46 8.95 14.20
KM-21-
48 605.2 610.7 5.5 3.54 0.45 0.19 12.7 0.05 4.00 6.55 10.40 3.63 5.95 9.45
KM-21-
48 630.3 634.6 4.3 1.11 0.34 0.69 12.7 0.11 1.71 2.80 4.45 1.52 2.49 3.95