Arizona Metals Corp’s Kay Mine Drilling Intersects 100.9 m at 2.5% CuEq, 61.4 m at 3.5 g/t AuEq, and 46.2 m at 3.9 g/t AuEq
Arizona Metals Corp’s Kay Mine Drilling Intersects 100.9 m at 2.5% CuEq,
61.4 m at 3.5 g/t AuEq, and 46.2 m at 3.9 g/t AuEq
TORONTO--(BUSINESS WIRE)--July 6, 2022--Arizona Metals Corp. (TSX.V:AMC,
OTCQX:AZMCF) (the “Company” or “Arizona Metals”) is pleased to announce the results of
seventeen recently completed drill holes at its Kay Mine project in Yavapai, County Arizona. An
additional 11 holes are pending.
Marc Pais, CEO, commented “The drill results from the Kay Mine Project released today
continue to demonstrate that the deposit is open for expansion in all directions, with numerous
wide intervals of both high grade gold and copper-rich sulphide mineralization. Hole 57C,
which hit 100.9 m at 2.5% CuEq, has extended the wide hinge zone about 30m north, where it is
also open for further extension at depth.
We have drilled approximately 56,000 meters at Kay to date, with each hole solidifying our
opinion that this is one of the very few large precious-metals rich VMS deposits not yet mined,
and more importantly, is potentially part of a much larger mineralized system that has yet to be
explored. Drilling is currently underway to test the Central Target, located 300 metres west of
Kay, and permitting is in progress for roads and pads to test the Western Target, located 1,000
metres west of Kay.
Drilling Highlights
(Equivalent grades include assumed metallurgical recoveries. See Table 1 for constituent
elements, grades, metals prices and recovery assumptions used for AuEq g/t and CuEq %
calculations.)
KM-22-57C
• 100.9 m at 2.5% CuEq, incl. 8.5 m at 8.6% CuEq and also 5.3 m at 6.6% CuEq
• This step-out hole to the north was drilled deep into the middle portion of the deposit,
above the 42 series of holes.
• A very thick intercept showing excellent continuity between holes 57B above, 42A
below, and 57 to the south, and extending mineralization about 30 m north of hole
48.Mineralization is open to the north and at depth here.
KM-22-62, 62A, 62B, 62C
• KM-22-62: 46.2 m at 3.9 g/t AuEq, incl. 1.8 m at 17.1 g/t AuEq and 6.8 m at 10.3 g/t
AuEq
• KM-22-62A: 61.4 m at 3.5 g/t AuEq, incl. 9.3 m at 6.7 g/t AuEq and 8.8 m at 5.3 g/t
AuEq
• KM-22-62B: 8.5 m at 2.3% CuEq and 17.6 m at 2.0% CuEq
• KM-22-62C: 16.8 m at 1.7 g/t AuEq and 15.5 m at 2.7% CuEq (incl. 5.3 m at 5.0%
CuEq)
• This series of four holes filled in the broad 110 m by 170 m area in the south-central part
of the deposit, between holes 24, 40, and 60 on the north and holes 9, 10, and 35 on the
south. These holes show excellent continuity of thick mineralization in this area.
KM-22-63
• 0.9 m at 4.8% CuEq
• The deepest intercept in the deposit, about 160 m downdip of KM-21-42C. Although
narrow, the intercept is relatively high in grade, suggesting additional potential at depth.
KM-22-64 through 69
• Holes 64 through 69 tested the downward extension of the North zone drilled in the
Phase 1 program, in the upper northern portions of the deposit. Although the pattern is
not yet clear, several relatively thick intercepts in this area indicate the presence of one or
more thickened fold hinges extending downward from hole 13, to be further delineated
with additional drilling.
• KM-21-64: 8.1 m at 2.0% CuEq. This hole showed significant thicknesses of
mineralization in the 130 m gap between holes 29 and 34.
• KM-21-66: 30.5 m at 1.0% CuEq. This hole demonstrated good continuity between holes
12 to the north and 21A to the south
KM-22-71, 71A
• These two holes stepped out north in the central part of the deposit, extending
considerable thicknesses of mineralization in this direction.
• KM-22-71: 17.3 m at 0.7% CuEq and 10.8 m at 3.3% CuEq (incl. 3.7 m at 6.6% CuEq)
KM-22-72
• 22.6 m at 1.0% CuEq (incl. 2.0 m at 2.8% CuEq)
Fills in mineralization to the south of hole 40 and north of hole 9, demonstrating good continuity
in the southern parts of the deposit just below midway vertically.
Kay Mine Phase 2 Drill Program Update
With the assayed holes released today, the Company has completed a total of 56,000 meters at
the Kay Mine since inception of drilling. The Company is fully-funded to complete the
remaining 19,000 meters planned for the Phase 2 program with the priority focus areas for
upcoming drilling (shown in Figure 5 below), as well as an additional 76,000 meters in the
upcoming Phase 3 program which will be used to test the numerous parallel targets heading West
of Kay and the Northern and Southern Extensions of the Kay Deposit.
Table 1. Results of Phase 2 Drill Program at Kay Mine, Yavapai County, Arizona announced in
this news release.
Analyzed Grade Analyzed Metal
Equivalent
Metal Equivalent Vertical
Depth
Below
Surface
m Hole ID
From
m
To
m
Length
m Cu %
Au
g/t Zn %
Ag
g/t Pb %
Cu
eq %
Au eq
g/t
Zn
eq%
Cu
eq %
Au eq
g/t
Zn
eq%
KM-22-
57C 784.3
885.1 100.9 1.24 1.54 1.56 25.8 0.14 3.02 4.95 7.85 2.54 4.16 6.61 771
including 829.4 837.9 8.5 1.60 7.71 9.04 100.9 0.35 10.66 17.47 27.72 8.62 14.14 22.43
including 852.2 857.6 5.3 6.81 0.10 0.09 23.3 0.02 7.10 11.63 18.46 6.55 10.73 17.03
KM-22-
59A 903.7
905.9 2.1 0.61 0.10 0.65 10.3 0.10 1.02 1.68 2.66 0.92 1.50 2.38 900
KM-22-
61 560.8
580.0 19.2 0.72 0.20 0.69 7.0 0.06 1.18 1.93 3.07 1.05 1.73 2.74 557
KM-22-
62 636.6
682.8 46.2 0.22 1.47 3.22 53.5 0.47 2.89 4.73 7.51 2.37 3.89 6.18 600
including 644.4 646.2 1.8 0.89 4.36 19.26 133.0 0.77 12.18 19.96 31.68 10.41 17.07 27.09
including 650.7 657.5 6.8 0.34 3.21 9.59 145.2 1.79 7.53 12.34 19.59 6.26 10.26 16.29
including 663.2 665.5 2.3 0.53 8.66 7.82 181.6 1.55 10.60 17.38 27.58 8.30 13.61 21.60
KM-22-
62 704.1
706.2 2.1 0.36 2.88 3.33 61.5 0.46 3.99 6.53 10.37 3.18 5.22 8.28 650
KM-22-
62A 582.2
643.6 61.4 0.31 1.27 2.65 40.8 0.58 2.55 4.18 6.64 2.11 3.47 5.50 530
including 593.1 602.4 9.3 1.15 2.29 4.37 52.4 0.91 4.85 7.94 12.60 4.08 6.68 10.60
including 608.9 617.8 8.8 0.20 1.79 4.26 91.2 1.15 3.90 6.40 10.15 3.20 5.25 8.33
including 627.7 630.9 3.2 0.41 7.10 15.01 180.0 2.77 12.56 20.58 32.66 10.31 16.89 26.81
KM-22-
62A 653.8
660.5 6.7 0.26 1.69 2.58 90.4 0.75 3.17 5.19 8.24 2.54 4.17 6.61 564
KM-22-
62B 590.9
599.4 8.5 1.58 0.52 1.13 22.6 0.28 2.57 4.21 6.68 2.27 3.72 5.91 508
KM-22-
62B 606.2
629.0 22.7 0.21 1.21 2.23 24.0 0.29 2.06 3.38 5.37 1.70 2.78 4.42
including 623.8 629.0 5.2 0.21 3.61 6.52 56.6 0.81 5.55 9.09 14.43 4.53 7.42 11.78
KM-22-
62C 613.6
630.3 16.8 0.57 0.40 0.48 20.3 0.11 1.18 1.93 3.07 1.01 1.65 2.62 557
KM-22-
62C 638.3
653.8 15.5 0.25 2.34 3.34 34.7 0.34 3.31 5.43 8.61 2.68 4.39 6.97
including 648.5 653.8 5.3 0.32 4.21 6.57 74.7 0.73 6.18 10.12 16.06 5.00 8.19 13.00
KM-22-
63 982.2
983.1 0.9 3.41 1.23 2.19 47.0 0.24 5.43 8.90 14.12 4.79 7.85 12.45 980
KM-22-
64 317.4
325.5 8.1 1.13 0.09 2.30 14.3 0.08 2.20 3.60 5.72 2.00 3.27 5.20 220
KM-22-
65 334.4
337.1 2.7 1.39 0.06 0.34 7.0 0.03 1.62 2.65 4.21 1.48 2.43 3.86 251
KM-22-
66 384.4
414.8 30.5 1.00 0.11 0.09 3.0 0.01 1.13 1.85 2.94 1.03 1.69 2.68
KM-22-
67 340.2
345.9 5.8 0.38 0.06 0.55 4.4 0.09 0.69 1.12 1.78 0.62 1.02 1.61 264
KM-22-
68 407.2
408.7 1.5 1.71 0.49 0.08 8.4 0.06 2.11 3.46 5.49 1.88 3.08 4.89 358
KM-22-
68 435.9
446.5 10.7 0.54 0.18 0.29 4.3 0.04 0.80 1.31 2.08 0.71 1.17 1.85 377
KM-22-
69 342.0
343.6 1.6 1.19 0.87 0.96 25.7 0.06 2.30 3.78 5.99 1.97 3.24 5.14 260
KM-22-
71 631.2
648.5 17.3 0.53 0.15 0.21 9.6 0.01 0.78 1.28 2.02 0.69 1.12 1.78 590
KM-22-
71 657.8
668.6 10.8 3.18 0.35 0.16 22.6 0.01 3.64 5.96 9.46 3.29 5.40 8.57 611
including 657.8 661.4 3.7 6.75 0.28 0.09 30.9 0.02 7.20 11.81 18.74 6.61 10.83 17.19
KM-22-
71A 554.3
561.4 7.2 0.39 0.22 0.64 10.3 0.22 0.90 1.47 2.34 0.78 1.29 2.04 506
KM-22-
72 637.6
660.2 22.6 0.34 0.38 1.15 12.9 0.27 1.17 1.92 3.05 1.01 1.66 2.63 596
KM-22-
72 669.3
671.3 2.0 0.17 2.15 4.15 23.1 0.56 3.38 5.55 8.80 2.79 4.57 7.25
The true width of mineralization is estimated to be 50% to 99% of reported core width, with an
average of 76%. (2) Assumptions used in USD for the copper and gold Metal Equivalent
calculations were metal prices of $4.63/lb Copper, $1937/oz Gold, $25/oz Silver, $1.78/lb Zinc,
and $1.02/lb Pb. Assumed metal recoveries (rec.), based on a preliminary review of historic data
by SRK and ProcessIQ1, were 93% for copper, 92% for zinc, 90% for lead, 72% silver, and 70%
for gold. The following equation was used to calculate copper equivalence: CuEq = Copper (%)
(93% rec.) + (Gold (g/t) x 0.61)(72% rec.) + (Silver (g/t) x 0.0079)(72% rec.) + (Zinc (%) x
0.3844)(93% rec.) +(Lead (%) x 0.2203)(93% rec.). The following equation was used to
calculate gold equivalence: AuEq = Gold (g/t)(72% rec.) + (Copper (%) x 1.638)(93% rec.) +
(Silver (g/t) x 0.01291)(72% rec.) + (Zinc (%) x 0.6299)(93% rec.) +(Lead (%) x 0.3609)(93%
rec.). Analyzed Metal Equivalent calculations are reported for illustrative purposes only. The
metal chosen for reporting on an equivalent basis is the one that contributes the most dollar value
after accounting for assumed recoveries.
Table 2. Full results of Phase 2 Drill Program at Kay Mine, Yavapai County, Arizona.
Analyzed Grade Analyzed Metal
Equivalent
Metal Equivalent Vertical
Depth
Below
Surface
m Hole ID
From
m To
m
Length
m Cu %
Au
g/t Zn %
Ag
g/t Pb %
Cu
eq %
Au eq
g/t
Zn
eq%
Cu
eq %
Au eq
g/t
Zn
eq%
KM-21-
17 429.5
449.9 20.4 1.81 1.10 1.20 21.2 0.17 3.14 5.15 8.18 2.73 4.47 7.10 300
including 429.5 434.0 4.6 4.61 1.73 1.91 29.1 0.24 6.68 10.96 17.39 5.92 9.70 15.39
including 432.7 434.0 1.4 0.52 6.81 8.29 40.0 1.10 8.41 13.79 21.89 6.76 11.09 17.60
KM-21-
17 504.4
505.4 0.9 1.19 4.73 0.05 9.0 0.00 4.17 6.83 10.84 3.20 5.24 8.31 356
KM-21-
18 404.3
429.8 25.5 0.35 0.86 1.71 15.8 0.23 1.71 2.80 4.44 1.43 2.35 3.72 255
including 408.6 410.6 2.0 0.50 2.22 7.25 64.4 0.82 5.33 8.74 13.87 4.51 7.39 11.72
including 424.9 427.3 2.4 1.60 2.59 3.16 18.0 0.52 4.66 7.64 12.12 3.92 6.43 10.21
KM-21-
18A 391.4
423.8 32.5 1.09 0.62 1.25 17.7 0.15 2.13 3.48 5.53 1.85 3.04 4.82 233
including 393.3 395.8 2.4 9.57 2.83 2.72 40.9 0.28 12.73 20.87 33.12 11.36 18.63 29.56
KM-21-
19 377.8
378.3 0.5 3.39 5.59 6.83 128.0 0.63 10.58 17.34 27.52 8.81 14.44 22.92 337
KM-21-
20 442.7
443.6 0.9 2.56 0.52 3.52 18.5 0.14 4.40 7.22 11.45 3.98 6.52 10.34 362
KM-21-
20 456.0
458.1 2.1 1.49 0.35 0.14 6.0 0.04 1.81 2.97 4.71 1.63 2.66 4.23 370
KM-21-
21 452.6
495.5 42.8 0.80 0.78 1.52 15.1 0.15 2.01 3.29 5.22 1.73 2.83 4.49 362
including 488.7 493.5 4.8 0.26 2.50 6.13 27.6 0.54 4.48 7.34 11.65 3.74 6.13 9.73
KM-21-
21A 422.0
431.4 9.4 1.17 0.57 2.25 8.6 0.36 2.53 4.15 6.58 2.25 3.68 5.85 362
KM-21-
21A 439.1
502.1 63.0 0.45 1.28 3.14 58.8 0.77 3.08 5.04 8.00 2.57 4.21 6.67 366
including 465.0 481.9 16.9 0.52 2.45 4.05 80.9 0.99 4.43 7.26 11.53 3.62 5.94 9.42
KM-21-
23 394.4
401.4 7.0 0.36 0.93 1.94 13.5 1.17 2.05 3.35 5.32 1.73 2.84 4.51 313
KM-21-
23 438.6
459.2 20.6 0.17 1.18 1.93 27.8 0.37 1.94 3.17 5.03 1.58 2.59 4.11 336
KM-21-
24 501.2
592.1 90.8 0.45 1.33 3.42 44.6 0.41 3.02 4.95 7.86 2.53 4.15 6.59 470
including 501.2 521.7 20.4 1.34 1.70 6.35 113.1 0.66 5.86 9.60 15.24 4.99 8.18 12.99
including 520.9 521.7 0.8 1.75 16.50 9.55 574.0 1.22 20.31 33.29 52.82 15.57 25.52 40.50
including 575.9 592.1 16.2 0.16 2.50 6.00 44.4 0.79 4.51 7.40 11.74 3.75 6.14 9.74
including 588.7 590.4 1.7 0.47 9.98 23.70 18.2 0.13 15.84 25.96 41.20 13.21 21.65 34.36
KM-21-
25 662.6
741.3 78.6 1.41 2.33 2.79 43.4 0.35 4.33 7.10 11.26 3.61 5.92 9.40 638
including 663.2 672.7 9.4 8.06 1.84 1.31 92.3 0.15 10.45 17.13 27.18 9.30 15.24 24.19
including 693.0 703.9 11.0 0.68 6.28 10.40 99.7 1.17 9.56 15.66 24.86 7.79 12.77 20.27
KM-21-
25A 654.7
719.9 65.2 1.04 1.94 2.15 18.9 0.18 3.25 5.32 8.44 2.71 4.43 7.04 624
including 655.5 662.8 7.3 3.66 2.09 1.85 30.2 0.21 5.93 9.73 15.44 5.17 8.47 13.44
including 710.8 716.9 6.1 2.72 7.95 3.73 37.4 0.31 9.37 15.36 24.38 7.52 12.33 19.56
KM-21-
25B 647.2
648.9 1.7 0.13 0.58 2.41 62.1 0.64 2.04 3.35 5.31 1.70 2.79 4.42 610
KM-21-
25B 655.6
659.9 4.3 0.93 0.91 0.91 25.3 0.19 2.07 3.40 5.40 1.75 2.88 4.56 615
KM-21-
25B 666.0
667.8 1.8 0.60 0.72 2.98 33.5 0.43 2.55 4.18 6.63 2.20 3.61 5.72 620
KM-21-
25B 673.3
674.7 1.4 0.08 2.10 2.39 23.0 0.33 2.53 4.15 6.58 2.01 3.29 5.23 628
KM-21-
25B 681.2
682.6 1.4 0.09 1.54 2.98 11.0 0.35 2.34 3.83 6.08 1.93 3.16 5.01 631
KM-21-
26 506.7
582.8 76.0 0.79 1.61 4.23 32.7 0.54 3.78 6.19 9.83 3.21 5.27 8.36 480
including 511.1 526.1 14.9 0.73 1.78 9.68 43.3 0.77 6.05 9.92 15.74 5.26 8.63 13.69
including 573.8 582.8 9.0 4.02 6.06 3.32 18.2 0.19 9.18 15.04 23.87 7.64 12.52 19.87
KM-21-
27 706.8
738.2 31.4 1.58 0.16 0.69 9.0 0.06 2.03 3.33 5.28 1.85 3.03 4.80 700
KM-21-
27 764.4
777.4 13.0 2.85 0.48 0.17 8.5 0.02 3.29 5.39 8.55 2.97 4.87 7.73 775
KM-21-
27A 666.3
769.4 103.1 0.79 1.06 1.90 35.8 0.42 2.54 4.17 6.62 2.15 3.52 5.59 678
including 666.3 687.0 20.7 3.21 1.39 1.26 19.4 0.20 4.74 7.77 12.33 4.18 6.84 10.86
including 706.4 724.6 18.3 0.69 2.69 4.70 92.2 1.21 5.13 8.41 13.35 4.22 6.91 10.97
including 752.9 763.8 11.0 0.07 1.07 4.68 95.3 0.98 3.49 5.73 9.09 2.92 4.78 7.59
KM-21-
27B 665.8
762.9 97.1 1.31 1.62 3.21 31.7 0.40 3.88 6.35 10.08 3.31 5.42 8.61 660
including 702.0 723.0 21.0 0.87 4.56 9.03 81.5 1.10 8.01 13.13 20.83 6.63 10.87 17.25
including 723.0 738.2 15.2 4.97 0.36 0.42 18.7 0.05 5.51 9.03 14.33 5.04 8.26 13.11
KM-21-
28 640.7
694.9 54.3 1.87 2.85 5.03 29.4 0.70 5.93 9.72 15.43 5.04 8.26 13.12 584
including 660.2 671.6 11.4 0.54 4.29 9.30 32.2 1.17 7.24 11.87 18.84 6.04 9.89 15.70
including 681.1 689.0 7.9 4.39 9.47 10.34 93.1 2.41 15.42 25.27 40.10 12.80 20.98 33.29
including 690.4 692.6 2.2 16.06 0.82 0.06 55.8 0.01 17.02 27.90 44.28 15.62 25.61 40.64
KM-21-
29 393.0
393.8 0.8 0.43 1.54 4.92 9.0 0.21 3.38 5.54 8.79 2.89 4.74 7.53 235
KM-21-
30 264.9
267.9 3.0 1.18 0.02 0.01 1.5 0.00 1.21 1.98 3.15 1.12 1.83 2.91 240
KM-21-
32 316.4
320.0 3.7 1.84 1.29 2.47 38.5 0.30 3.95 6.47 10.27 3.41 5.60 8.88 185
KM-21-
32 342.9
345.9 3.0 0.67 0.52 2.70 13.0 0.15 2.16 3.54 5.62 1.90 3.12 4.95 190
KM-21-
32 358.9
368.4 9.4 0.60 1.47 1.99 45.7 0.35 2.70 4.42 7.01 2.22 3.63 5.76 195
KM-21-
33 171.3
172.5 1.2 3.79 0.45 0.21 63.0 0.17 4.69 7.68 12.19 4.19 6.86 10.89 150
KM-21-
34 299.3
303.9 4.6 0.29 1.69 0.94 46.3 0.26 2.12 3.47 5.50 1.65 2.70 4.29 205
KM-21-
34 309.7
310.9 1.2 2.27 0.56 1.55 19.9 0.08 3.38 5.54 8.80 3.03 4.96 7.87 210
KM-21-
35 609.6
615.1 5.5 0.92 1.26 1.71 57.7 0.02 2.80 4.60 7.29 2.33 3.82 6.06 550
including 609.6 613.0 3.4 1.39 1.69 1.98 54.0 0.01 3.61 5.92 9.40 3.03 4.96 7.87
KM-21-
38 406.5
407.8 1.4 0.60 1.08 9.41 4.0 0.25 4.96 8.13 12.90 4.42 7.24 11.49 345
KM-21-
38 467.4
476.1 8.7 0.09 1.73 3.87 61.1 1.22 3.38 5.55 8.80 2.78 4.56 7.23 370
including 470.0 475.2 5.2 0.12 2.44 5.68 87.5 1.79 4.88 8.01 12.71 4.02 6.59 10.46
KM-21-
40 589.8
613.8 24.0 4.98 0.61 0.98 23.4 0.45 6.01 9.86 15.65 5.46 8.95 14.21 550
including 589.8 597.9 8.1 7.63 0.43 0.39 27.1 0.17 8.30 13.60 21.58 7.61 12.47 19.78
KM-21-
40 627.9
680.8 52.9 0.47 2.91 3.40 35.7 0.40 3.93 6.44 10.22 3.17 5.20 8.25 590
including 641.1 648.3 7.2 1.15 7.66 8.27 88.5 0.92 9.90 16.23 25.76 7.95 13.03 20.68
including 670.3 674.1 3.8 1.53 10.89 9.47 24.6 0.61 12.15 19.91 31.59 9.69 15.88 25.19
KM-21-
41 462.6
559.3 96.7 1.04 1.54 2.66 40.8 0.35 3.41 5.59 8.86 2.87 4.71 7.47 420
including 503.2 514.2 11.0 0.99 5.34 8.17 106.3 1.63 8.59 14.08 22.35 7.02 11.51 18.26
including 546.7 558.1 11.4 5.86 5.83 3.24 185.4 0.04 12.14 19.90 31.58 10.15 16.64 26.40
including 553.1 556.9 3.8 7.11 9.55 5.70 505.8 0.09 19.16 31.41 49.84 15.62 25.59 40.62
KM-21-
42 803.5
810.3 6.9 0.05 1.60 1.58 64.3 0.35 2.22 3.64 5.78 1.73 2.83 4.49 800
KM-21-
42 835.5
839.7 4.3 0.63 2.46 2.15 21.7 0.21 3.18 5.20 8.26 2.56 4.20 6.67 816
KM-21-
42 853.7
854.7 0.9 0.11 1.63 2.88 28.0 0.40 2.52 4.13 6.55 2.05 3.37 5.34 846
KM-21-
42A 786.7
787.6 0.9 0.03 3.61 2.18 17.0 0.70 3.36 5.51 8.74 2.58 4.22 6.70 781
KM-21-
42A 805.4
811.1 5.6 6.17 0.92 0.18 39.5 0.01 7.12 11.68 18.53 6.43 10.54 16.72 802
including 807.0 808.9 2.0 10.72 0.87 0.11 61.8 0.00 11.79 19.32 30.66 10.74 17.60 27.93
KM-21-
42A 840.9
877.2 36.3 0.55 0.62 1.35 10.7 0.13 1.56 2.56 4.06 1.34 2.20 3.49 848
KM-21-
42B 808.0
811.2 3.2 0.29 2.06 5.77 63.0 0.94 4.47 7.33 11.63 3.74 6.13 9.72 790
KM-21-
42B 816.9
819.9 3.0 2.31 0.66 1.23 16.0 0.15 3.35 5.49 8.71 2.99 4.90 7.77 810
KM-21-
42B 835.5
840.8 5.3 0.02 0.73 2.93 13.5 0.24 1.75 2.87 4.56 1.49 2.45 3.88 828
KM-21-
42C 849.2
877.4 28.2 3.81 0.47 0.29 12.5 0.09 4.32 7.08 11.24 3.93 6.44 10.23 850
including 849.2 854.7 5.5 14.57 0.66 0.16 37.5 0.03 15.34 25.14 39.89 14.11 23.12 36.70
including 863.8 869.4 5.6 2.29 1.17 0.59 13.1 0.25 3.39 5.55 8.81 2.96 4.85 7.70
including 874.8 877.4 2.6 2.83 0.26 0.03 7.2 0.01 3.06 5.02 7.96 2.80 4.59 7.28
KM-21-
42C 886.1
889.1 3.0 0.87 0.88 0.50 5.2 0.05 1.65 2.71 4.30 1.40 2.30 3.65 855
KM-21-
43 583.7
607.1 23.4 0.39 0.25 3.68 3.1 0.02 1.98 3.25 5.15 1.79 2.93 4.65 586
including 598.9 599.8 0.9 0.50 0.18 11.30 3.0 0.03 4.99 8.17 12.97 4.56 7.48 11.87
KM-21-
43 616.0
633.1 17.1 1.81 0.17 0.14 8.2 0.03 2.04 3.34 5.31 1.86 3.05 4.84 616
including 631.2 633.1 1.8 6.30 0.61 0.09 25.0 0.01 6.91 11.32 17.97 6.30 10.32 16.38
KM-21-
44 353.4
377.3 23.9 0.34 0.97 2.52 18.3 0.33 2.12 3.47 5.50 1.79 2.93 4.65 185
including 354.0 356.6 2.6 0.23 2.14 7.97 38.9 0.68 5.06 8.29 13.15 4.30 7.05 11.19
KM-21-
45 459.6
463.0 3.4 0.32 0.62 6.63 82.3 0.87 4.10 6.71 10.65 3.55 5.82 9.24 459
including 461.2 462.1 0.9 0.15 1.23 16.90 182.0 2.50 9.39 15.38 24.41 8.17 13.39 21.26
KM-21-
46 350.4
362.9 12.4 0.66 2.61 3.69 40.6 0.39 4.08 6.69 10.61 3.34 5.48 8.70 157
including 350.4 353.3 2.8 0.77 5.19 6.83 107.0 0.72 7.58 12.42 19.70 6.11 10.01 15.88
Table 2 Continued:
Analyzed Grade Analyzed Metal
Equivalent
Metal Equivalent Vertical
Depth
Below
Surface
m Hole ID
From
m To
m
Length
m Cu % Au g/t Zn %
Ag
g/t Pb %
Cu
eq %
Au eq
g/t
Zn
eq%
Cu
eq %
Au eq
g/t
Zn
eq%
KM-21-
47 433.9
435.9 2.0 0.16 1.88 9.28 138.7 2.17 6.46 10.58 16.79 5.46 8.95 14.20 432
KM-21-
48 605.2
610.7 5.5 3.54 0.45 0.19 12.7 0.05 4.00 6.55 10.40 3.63 5.95 9.45 606
KM-21-
48 630.3
634.6 4.3 1.11 0.34 0.69 12.7 0.11 1.71 2.80 4.45 1.52 2.49 3.95 631
KM-21-
48 685.5
696.8 11.3 0.98 0.05 0.06 4.2 0.02 1.07 1.75 2.77 0.98 1.60 2.54 686
KM-21-
48 715.1
718.4 3.4 2.08 0.04 0.03 4.3 0.01 2.15 3.52 5.59 1.98 3.25 5.16 716
KM-21-
48 723.0
724.5 1.5 1.54 0.07 0.06 4.0 0.02 1.64 2.68 4.26 1.51 2.47 3.92 724
KM-21-
48 735.5
743.6 8.1 0.34 0.60 1.52 9.2 0.07 1.38 2.26 3.59 1.18 1.93 3.06 737
KM-21-
48A 538.0
539.5 1.5 0.31 1.17 2.79 29.0 0.52 2.44 4.01 6.36 2.05 3.35 5.32 538
KM-21-
48A 687.9
696.9 9.0 1.64 0.36 0.79 7.9 0.01 2.23 3.66 5.80 2.01 3.29 5.22 688
including 687.9 688.8 0.9 0.15 1.53 5.35 5.0 0.01 3.18 5.21 8.27 2.71 4.45 7.06
including 694.9 696.0 1.1 8.36 0.80 0.10 40.0 0.03 9.21 15.10 23.96 8.39 13.75 21.81
KM-21-
50 489.5
501.9 12.3 0.98 2.30 6.36 111.9 1.24 5.99 9.81 15.57 5.02 8.24 13.07 481
including 489.5 493.0 3.4 2.64 3.59 9.49 207.7 1.65 10.49 17.20 27.30 8.86 14.52 23.05
KM-21-
50 509.0
562.1 53.1 0.44 0.84 1.28 35.8 0.27 1.79 2.93 4.65 1.48 2.42 3.84 501
including 538.1 545.6 7.5 0.28 1.94 2.62 112.8 0.82 3.55 5.81 9.23 2.82 4.63 7.34
KM-21-
51B 860.5
870.2 9.8 3.00 0.13 0.10 6.5 0.05 3.18 5.21 8.27 2.93 4.80 7.62
including 864.7 865.6 0.9 8.70 0.09 0.09 16.0 0.10 8.93 14.64 23.24 8.27 13.55 21.51
KM-21-
51B 881.5
884.2 2.7 0.52 0.22 0.62 28.3 0.14 1.15 1.88 2.98 0.99 1.61 2.56
KM-21-
51B 893.7
903.4 9.8 1.51 0.10 0.06 4.4 0.01 1.63 2.67 4.24 1.49 2.45 3.89
including 898.2 899.3 1.1 6.56 0.11 0.10 15.0 0.04 6.79 11.13 17.67 6.28 10.29 16.32
KM-21-
52 751.5
758.2 6.7 1.18 0.66 0.98 18.2 0.14 2.14 3.50 5.56 1.86 3.05 4.84 743
KM-21-
52 787.5
789.6 2.1 0.04 1.27 1.68 28.5 0.22 1.73 2.84 4.50 1.38 2.25 3.58 777
KM-21-
52A 763.7
793.1 29.4 0.25 1.12 1.36 51.6 0.47 1.97 3.22 5.11 1.58 2.58 4.10 750
including 763.7 764.9 1.2 0.38 3.01 8.69 132.0 1.68 6.97 11.43 18.13 5.80 9.50 15.08
including 771.8 774.5 2.7 1.39 2.46 4.59 116.4 1.82 5.98 9.81 15.56 5.00 8.19 12.99
including 781.5 787.6 6.1 0.31 2.63 1.64 119.5 0.65 3.64 5.97 9.47 2.81 4.60 7.30