Arizona Metals Corp Announces Commencement of Fully-Funded 6,000 Metre Surface Exploration Program at its Kay Mine VMS Project in Arizona
Arizona Metals Corp Announces Commencement of Fully-Funded 6,000 Metre Surface
Exploration Program at its Kay Mine VMS Project in Arizona
TORONTO, January 6, 20 20 – Arizona Metals Corp. (TSX.V:AMC) (the “Company” or
“Arizona Metals”) is pleased to announce that on January 4th, 2020 it commenced its fully-
funded 6,000m surface drilling program at its Kay Mine VMS project, located in Yavapai
County, Arizona. The Company has engaged Boart Longyear Drilling Services to undertake the
drill program and International Directional Services LLC to provide directional drilling services.
SRK Consulting Inc, was engaged in October 2019 to complete a review of the Kay Mine historic
data and its final report was received in December 2019. The purpose of the SRK review was to
further refine the drill plan and identify additional potential targets prior to the commencement of
drilling.
The first assay results of the drill prog ram are expected to be received during Q1 2020, with
completion of the drill program anticipated in Q2 2020. The drill for the program is a LF90 track
rig with a capability of drilling both HQ and NQ core to a maximum vertical depth of 1,100 m
(Figure 1 below).
Figure 1. Track drill rig at Kay Mine site (pictured Jan 4 th, 2020).
The first phase of drilling will comprise 16 holes, ranging in length from 300m to 650m, with the
goal of testing the historic estimate defined by Exxon Minerals in 1982 (Figure 2 and Table 1) and
also to test the possible depth extensions of the lenses. The lenses to be tested are along a strike
length of approximately 275m and range in depth from approximately 100m to 700m. The bulk
of the historic estimate defined by Exxon lies between a depth of 150m and 450m and 12 of the
16 planned drill holes have been targeted to intersect this zone. The remaining 4 holes will test
possible extensions of the lenses from a depth of app roximately 450m to 600m depth (Figure 3).
It is anticipated that the results of this program, along with additional future drilling, could be
incorporated into a resource estimate.
Table 1. Historic estimate by Exxon Minerals in 1982, reported as “proven and probable reserves”
The historic estimate at the Kay Mine was reported by Exxon Minerals in 1982. The historic
estimate has not been verified as a current mineral resource. None of the key assumptions,
parameters, and methods used to prepare th e historic estimate were reported, and no resource
categories were used. Significant data compilation, re -drilling and data verification may be
required by a Qualified Person before the historic estimate can be verified and upgraded to be
compliant with current NI 43-101 standards. A Qualified Person has not done sufficient work to
classify it as a current mineral resource, and Arizona Metals is not treating the historic estimate
as a current mineral resource.
Figure 2. Kay Mine proposed 6,000m drill program, plan view
Short Tons
(millions) Copper Grade Gold Grade (g/t) Zinc Grade Silver Grade (g/t)
6.4 2.20% 2.8 3.03% 55
G H M N
Arizona Metals Corp plans to undertake additional drilling to test the potential extensions of the
deposit both along strike and at depth. Exxon reported a true width intersection of 10m at 4%
copper at a depth of 670m, and the de epest mineralized intersection was reported at a depth of
900m. Exxon also estimated that only one quarter of the strike had been tested, based on
geophysical surveys and by mapping the mineralized horizon at surface.
Figure 3. Kay Mine Proposed 6,000m drill program, looking northeast
Arizona Metals Corp engaged Geotech Ltd. to complete a helicopter VTEM geophysical survey
in March 2019. The results of the survey identified two large near-surface, untested anomalies, the
Central Conductor and Western Conductor (Figure 4), located 500m and 1000m, respectively,
directly west of the Kay deposit. The Company is currently working on a drill permit application
for these two targets, which it expects to submit in Q1 2020, with drilling anticipated to commence
during Q2 2020.
Figure 4. Kay Mine proposed drill program and two untested VTEM anomalies
About Arizona Metals Corp
Arizona Metals Corp owns 100% of the Kay Mine Property in Yavapai County, which is located
on a combination of patented and BLM claims totaling 1,300 acres that are not subject to any
royalties. An historic estimate by Exxon Minerals in 1982 reported a “proven and probable reserve
of 6.4 million short tons at a grade of 2.2% copper, 2.8g/t gold, 3.03% zinc, and 55g/t silver”. The
historic estimate at the Kay Mine was reported by Exxon Minerals in 1982. The historic estimate
has not been verified as a current mineral resource. None of the key assumptions, parameters,
and methods used to prepare the historic estimate were reported, and no resource categories were
used. Significant data compilation, re -drilling and data verification may be required by a
Qualified Person before the historic estimate can be verified and upgraded to be compliant with
current NI 43-101 standards. A Qualified Person has not done sufficient work to classify it as a
current mineral resource, and Arizona Metals is not treating the historic estim ate as a current
mineral resource.
The Kay Mine is a steeply dipping VMS deposit that has been defined from a depth of 150m to
at least 900m. It is open for expansion on strike and at depth.
The Company also owns 100% of the Sugarloaf Peak Property, in La Paz County, which is located
on 4,400 acres of BLM claims. Sugarloaf is a heap-leach, open-pit target and has a historic estimate
of “100 million tons containing 1.5 million ounces gold” at a grade of 0.5g/t (Dausinger, 1983,
Westworld Resources).
The historic estimate at the Sugarloaf Peak Property was reported by Westworld Resources in
1983. The historic estimate has not been verified as a current mineral resource. None of the key
assumptions, parameters, and methods used to prepare the historic estimate were reported, and
no resource categories were used. Significant data compilation, re -drilling and data verification
may be required by a Qualified Person before the historic estimate can be verified and upgraded
to be compliant wit h current NI 43 -101 standards. A Qualified Person has not done sufficient
work to classify it as a current mineral resource, and Arizona Metals is not treating the historic
estimate as a current mineral resource.
The Qualified Person who reviewed and approved the technical disclosure in this release is David
Smith, CPG.
This press release contains statements that constitute “forward -looking information” (collectively,
“forward-looking statements”) within the meaning of the applicable Canadian securities le gislation, All
statements, other than statements of historical fact, are forward -looking statements and are based on
expectations, estimates and projections as at the date of this news release. Any statement that discusses
predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance
(often but not always using phrases such as “expects”, or “does not expect”, “is expected”, “anticipates”
or “does not anticipate”, “plans”, “budget”, “scheduled”, “forecasts”, “estimates”, “believes” or
“intends” or variations of such words and phrases or stating that certain actions, events or results “may”
or “could”, “would”, “might” or “will” be taken to occur or be achieved) are not statements of historical
fact and may be forward -looking statements. Forward-looking statements contained in this press release
include, without limitation, statements regarding VTEM survey results, permitting and drilling; use of
funds; and the business and operations of the Company. In making the forward - looking statements
contained in this press release, the Company has made certain assumptions. Although the Company
believes that the expectations reflected in forward -looking statements are reasonable, it can give no
assurance that the expectations of any forward -looking statements will prove to be correct. Known and
unknown risks, uncertainties, and other factors which may cause the actual results and future events to
differ materially from those expressed or implied by such forward-looking statements. Such factors include,
but are not limited to: availability of financing; delay or failure to receive required permits or regulatory
approvals; and general business, economic, competitive, political and social uncertainti es. Accordingly,
readers should not place undue reliance on the forward -looking statements and information contained in
this press release. Except as required by law, the Company disclaims any intention and assumes no
obligation to update or revise any forward-looking statements to reflect actual results, whether as a result
of new information, future events, changes in assumptions, changes in factors affecting such forward -
looking statements or otherwise.
NEITHER THE TSX VENTURE EXCHANGE (NOR ITS REGULATORY SERVICE PROVIDER) ACCEPTS
RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE
For further information, please contact:
Marc Pais
President and CEO
Arizona Metals Corp.
(416) 565-7689
www.arizonametalscorp.com
https://twitter.com/ArizonaCorp