Altamira Gold Reports First Drill Results from Follow-up Drilling at Intrusive-hosted Maria Bonita Gold Discovery, Cajueiro Project, Brazil
Altamira Gold Reports First Drill Results from
Follow-up Drilling at Intrusive-hosted Maria
Bonita Gold Discovery, Cajueiro Project, Brazil
Vancouver, British Columbia--(Newsfile Corp. - April 17, 2024) -
Altamira Gold Corp. (TSXV: ALTA)
(FSE: T6UP) (OTC Pink: EQTRF)
("
Altamira
" or the "
Company
") is pleased to announce the results
of the first six drill holes completed in the second drill campaign at the Maria Bonita gold discovery.
Highlights:
DDMDA13 returned 139.4m @ 0.5 g/t gold from surface including 28m @ 0.9 g/t gold. DDMDA15
similarly returned 120.3m @ 0.5 g/t gold from 69.2m depth including 38.5m @ 0.9 g/t gold from
151m depth.
DDMDA10 returned 160.0m @ 0.4 g/t gold from 36.0m depth including 31.2m @ 0.6 g/t gold from
79.4m depth and 6.2m @ 3.6 g/t gold from 245.5m depth.
Four of the six holes completed confirmed the association of thick intervals (76-160m) of gold
mineralization with a sub-cropping quartz porphyry rhyolite intrusive. This is the same host rock
intersected in prior drilling and is now shown to be mineralized over approximately 250m east-west
by 200m north-south.
The wide gold mineralized intervals indicate an extensive mineralizing event within which the higher
grades are related to the intensity of stockwork quartz veining. The well-developed stockwork lies
within a broader envelope of alteration characterised by pervasive potassic, chlorite and sericite
zones with varying degrees of quartz veining and lower grade gold mineralization.
Drilling continues and logging and analysis of a further 13 holes is underway. The drill programme
will also include HQ diameter metallurgical drillholes to provide samples to optimise the excellent
gold recoveries achieved in leach testwork to date.
CEO Mike Bennett commented; "Our initial step-out drillholes east and west of the prior discovery
drilling have returned thicker, pervasively gold mineralized intervals in altered and veined intrusive
rhyolites. These intervals, with consistent gold mineralization over up to 160 metres downhole,
indicate that the mineralizing event is extensive and has continuity.
Geologically, these results are
consistent with the prior drilling in enlarging the gold mineralized footprint at Maria Bonita within the
intrusive rhyolite. The area of sub-cropping, and low-cover mineralization identified in the prior drilling
has been extended to the west for at least 100m. Hole MBA010 also intersected a deeper, higher-
grade structure that provides us with the first vector towards a potential higher grade feeder zone to the
mineralizing system."
CAJUEIRO PROJECT
The Cajueiro project is located approximately 75km NW of the town of Alta Floresta in the state of Mato
Grosso (Figure 1) in central western Brazil and is easily accessible by road and has grid power.
Cajueiro forms one of three key projects that Altamira controls in the region, the other two being Apiacas
and Santa Helena (Figure1).
Figure 1: Location of the Cajueiro, Apiacas and Santa Helena projects.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/205821_0d186c27145dbbe1_001full.jpg
The Cajueiro project has current NI 43-101 resources of 5.66Mt @ 1.02 g/t gold for a total of 185,000 oz
in the Indicated Resource category and 12.66Mt @ 1.26 g/t gold for a total of 515,000 oz in the Inferred
Resource category (estimated using a gold price of US$1,500/oz).
Maria Bonita Target
Maria Bonita is located 7km west of the Cajueiro mineral resource and is easily accessible by road. The
current drill programme is follow-up to the initial round of discovery drillholes which include
69m @ 1g/t
gold
in
MBA005, 50m @ 1.1 g/t gold
in
MBA004, 55m @ 1.0 g/t gold
in
MBA002, 50m @ 1.0 g/t
gold
in
MBA001
and
45m @ 1.4 g/t gold
in
MBA003
(all from surface). The gold mineralization is
notably uniform in the initial discovery holes, with a peak assay value of 7.7 g/t Au. Initial metallurgical
characterisation tests returned gold recoveries of 88% (column leach of saprolite) and 90% (agitated
leach in saprolite and fresh rock) on composite drill core samples.
There is no outcrop in the project area, therefore this second drill programme is largely guided by the
results of the prior drilling plus ground magnetics and soil survey data. Prior soil surveys have defined a
pronounced soil anomaly over 400ppb Au measuring 250m by 300m, within a larger trapezoid-shaped
magnetic low, bounded by interpreted structures (see Figure 2 and the press release dated 5
th
December 2023). The extensive magnetic low may reflect the hydrothermally altered package of host
mineralized intrusive rocks (Figure 2).
This second drill programme aims to further the extent of the bedrock gold mineralization. To date in the
current programme, 19 diamond core drillholes have been completed for a total of 3,245.7 metres.
Results are presented for the first six drillholes (DDMBA010-015). The deepest hole in the current
programme is 267m. Holes reported here and completed to date are shown in Figure 2 and Table 1.
Figure 2: Location of completed drillholes (white) and those reported in this release (yellow).
Background shows interpreted significant structures within the broad trapezoid-shaped magnetic low
that hosts the alteration and mineralization. The 400ppb gold-in-soil contour highlights the highest
potential for sub-cropping mineralization.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/205821_0d186c27145dbbe1_002full.jpg
Drillhole
Depth
From
To
Length
Grade
Peak assay
metres
metres
metres
metres
Au g/t
Au g/t
DDMBA-0010
267
36.0
196.0
160.0
0.36
7.46
including
79.4
110.5
31.2
0.56
including
245.5
251.7
6.2
3.59
DDMBA-0011
148
0.0
76.0
76.0
0.23
0.61
DDMBA-0012
152
90.0
97.0
7.0
0.30
0.57
DDMBA-0013
139
0.0
139.4
139.4
0.47
1.47
including
0.0
28.0
28.0
0.85
including
0.0
94.0
94.0
0.58
DDMBA-0014
153
0.0
7.0
7.0
0.45
0.72
67.0
72.0
5.0
0.32
DDMBA-0015
189
0.0
20.2
20.2
0.39
2.12
69.2
189.5
120.3
0.52
including
94.6
189.5
94.9
0.59
including
151.0
189.5
38.5
0.90
Table 1: Summary assay results for drillholes MBA010 to MBA 015.
Holes MBA0010 and 0013 (Figures 2 and 3 are step-outs to the east and west of the original drill
discovery. They both intersected a thick package of mineralized rhyolite intrusives with varying amounts
of stockwork quartz veining. Holes MBA0011 and 0012 were drilled to the south-west of the discovery
area. Hole 0011 intersected 76m of lower grade gold mineralization whereas Hole 0012, whilst
intersecting the same intrusive rhyolite is interpreted as lying outside the mineralized zone.
Hole 0014, which is located to the east of hole 0007 (71m @ 0.6 g/t Au from 34m and 43m @ 0.5g/t Au
from 105m) implies that the bedrock gold mineralization does not extend that far east although the
saprolite mineralized zone is present (7m @ 0.45g/t Au from surface).
Hole 0015, collared 130m southeast of the discovery zone, intersected 120m at 0.52g/t Au with a higher
grade 38.5m at 0.9g/t Au from 151m. This is currently the deepest intercept of wide, consistent
mineralization to date.
The second phase drilling has confirmed that the host quartz porphyry rhyolite intrusive extends beyond
the original drill footprint. Alteration zoning within the intrusive consists of higher temperature potassic
and lower temperature sericite and chlorite zones. Gold is present in all types of alteration and has a
variable correlation with both quartz vein intensity and magnetic susceptibility, implying that there is more
than one phase of introduction of gold.
Later un-mineralized felspar porphyry dykes cross-cut the host quartz porphyry rhyolite and are
interpreted to trend north-east through the drilled area.
The mineralized intrusive contains several zones with unidirectional solidification textures (UST) (see
Figure 3b) which occur at greater depths than seen in the first round of drilling. These textures represent
veining emplaced in a gell-like or plastic state whilst the intrusive host-rocks were cooling, as distinct
from later, more linear vein sets and breccias that were introduced into a more rigid solid intrusive, post-
cooling.
They are indicators of the position of the drilled mineralization towards the top of the original
intrusive body. Work continues to assess the relationship of gold grades to the specific vein directions
and textures noted in the core, to define vectors towards higher grade mineralization and to guide further
drilling.
Figure 3: Core showing typical brecciated and veined textures within mineralized quartz porphyry in
holes MBA010 and MBA013.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/205821_0d186c27145dbbe1_003full.jpg
Figure 4: Core photos showing intense hydrothermal alteration and visible gold in MBA0010.
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/205821_0d186c27145dbbe1_004full.jpg
Figure 5: Schematic cross section (east west) showing holes MBA010 and MBA013 projected. The sub-
cropping mineralization is covered to both the east and west by a later cross-cutting later felspar
porphyry dyke (blue low-grade zone at surface in holes MBA007 and 010).
To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/4500/205821_0d186c27145dbbe1_005full.jpg
The interpretation shown in Figure 5 is a longitudinal section with drillholes projected onto the section. It
shows the relative positions of the outcropping, higher grade mineralization, extending beneath the cover
of a thin later dyke to the east and west. Hole MBA014 appears to close off the mineralization to the east
whereas, to the east, the zone continues under cover. A second deeper mineralized trend is present in
Hole 15 (collared off section) and remains open to depth.
One occurrence of visible gold was noted (MBA010) in a 1m assay interval reporting 1.26g/t Au (from
85.5m) (Figure 4). This gold occurs disseminated in chlorite-altered intrusive (as opposed to quartz
veining), thus implying that it may be more widespread than recorded in logging. Follow-up screen fire
assay is underway to check whether the standard 50g fire assay method used throughout may be under-
reporting gold grades in this interval with relatively coarse gold.
The current drill results have successfully extended the footprint of consistent bedrock gold mineralization
to both the east and west.
The zone of mineralized quartz porphyry rhyolite, with an average grade
>0.5g/t gold, has a true thickness of 80-120m in the area covered by the drill section. Drilling continues
and logging and analysis of a further 13 holes is underway. The drill programme will also include HQ
diameter metallurgical drillholes to provide samples to optimise the excellent gold recoveries achieved
in leach testwork to date.
Qualified Person
Guillermo Hughes, FAIG and M AusIMM., a consultant to the Company as well as a Qualified Person as
defined by National Instrument 43-101, supervised the preparation of the technical information in this
news release.
About Altamira Gold Corp.
The Company is focused on the exploration and development of gold and copper projects within western
central Brazil. The Company holds 6 projects comprising approximately 190,000 hectares, within the
prolific Juruena gold belt which historically produced an estimated 7 to 10Moz of placer gold. The
Company's advanced Cajueiro project has NI 43-101 resources of 5.66Mt @ 1.02 g/t gold for a total of
185,000 oz in the Indicated Resource category and 12.66Mt @ 1.26 g/t gold for a total of 515,000oz in
the Inferred Resource category.
On Behalf of the Board of Directors,
ALTAMIRA GOLD CORP.
"Michael Bennett"
Michael Bennett
President & CEO
Tel: 604.676.5660
Toll-Free:1-833-606-6271
www.altamiragold.com
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this
release.
The securities described herein have not been registered under the U.S. Securities Act or any state
securities laws, and may not be offered or sold in the United States absent registration or an
applicable exemption from registration requirements under the U.S. Securities Act and any applicable
state securities laws.
Forward-looking Statements
Certain information contained herein constitutes "forward-looking information" under Canadian
securities legislation.
Forward-looking information includes, but is not limited to, statements with
respect to the extension of the Warrants.
Generally, forward-looking information can be identified by
the use of forward-looking terminology such as "will", "intends" or variations of such words and
phrases or statements that certain actions, events or results "will" occur.
Forward-looking statements
are based on the opinions and estimates of management as of the date such statements are made
and they are subject to known and unknown risks, uncertainties and other factors that may cause the
actual results to be materially different from those expressed or implied by such forward-looking
statements or forward-looking information, including the receipt of all necessary regulatory approvals.
Although management of the Company has attempted to identify important factors that could cause
actual results to differ materially from those contained in forward-looking statements or forward-looking
information, there may be other factors that cause results not to be as anticipated, estimated or
intended.
There can be no assurance that such statements will prove to be accurate, as actual results
and future events could differ materially from those anticipated in such statements.
Accordingly,
readers should not place undue reliance on forward-looking statements and forward-looking
information.
The Company will not update any forward-looking statements or forward-looking
information that is incorporated by reference herein, except as required by applicable securities laws.
Notes
Gold analysis has been conducted by SGS method FAA505 (fire assay of 50g charge), with higher
grade samples checked by FAA525. Analytical quality is monitored by certified references and
blanks. Until dispatch, samples are stored under the supervision the Company's exploration office.
The samples are couriered to the assay laboratory using a commercial contractor. Pulps are returned
to the Company and archived. Drill holes results are quoted as down-hole length weighted
intersections.
To view the source version of this press release, please visit
https://www.newsfilecorp.com/release/205821