On Tuesday 06 02, 2026 at 7:35AM ET Silver X Intersects 40.71 m True Width at 98.7 g/t AgEq (69.53 g/t Ag, 0.87% Pb, 0.28% Zn) at Blenda Rubia, Including 4.12 m of 274.5 g/t AgEq
On Tuesday 06 02, 2026 at 7:35AM ET
Silver X Intersects 40.71 m True Width at 98.7 g/t AgEq
(69.53 g/t Ag, 0.87% Pb, 0.28% Zn) at Blenda Rubia,
Including 4.12 m of 274.5 g/t AgEq
VANCOUVER, BC / ACCESS Newswire / June 2, 2026 / Silver X Mining Corp. (TSX-V:AGX)(OTCQX:AGXPF)(F:AGX)
("Silver X" or the "Company") is pleased to report new underground diamond drill results from the Blenda Rubia ("BR") target,
located within the Company's Nueva Recuperada Unit in central Peru. The latest results from hole DDH-BR-016 continue to
confirm that Blenda Rubia is evolving into a broader and more scalable polymetallic mineralized system than would be implied
by a simple narrow-vein interpretation.
Importantly, the Company believes these results further support the view that Blenda Rubia has the potential to become an
increasingly relevant growth front within Nueva Recuperada. The repetition of broad mineralized intercepts across multiple drill
holes indicates that these wider zones are not isolated local features, but rather part of a mineralized system with the potential to
support a larger mining footprint, increased operational flexibility and, over time, a more scalable development scenario.
Hole DDH-BR-016 was drilled from Platform No. 003 to a final depth of 305.70 meters and intersected a mineralized structural
zone of 104.20 meters apparent width, equivalent to 40.71 meters true width, between 179.30 meters and 283.50 meters. The
interval returned average grades of 69.53 g/t Ag, 0.87% Pb, 0.28% Zn and 0.02% Cu, equivalent to 98.7 g/t AgEq. These results
confirm continuity of the polymetallic system at depth, approximately 60 meters below the last level historically recognized by
Buenaventura, and reinforce the Company's view that Blenda Rubia may support a more ambitious ramp-up scenario as drilling
continues to expand the scale and continuity of the mineralized corridor.
The Company interprets these results as further evidence that mineralization at Blenda Rubia is not restricted to discrete veins,
but is instead developed within a broader mineralized corridor composed of principal veins, tensional structures, moderate veinlet
stockworks, silicified horses and altered host rock. This broader geometry is increasingly important from a corporate perspective,
as it may enhance the project's scalability, support wider mineable zones in selected sectors, and strengthen Blenda Rubia's
potential role in Silver X's production ramp-up strategy at Nueva Recuperada.
Blenda Rubia Highlights:
DDH-BR-016 intersected 104.20 meters apparent width, equivalent to 40.71 meters estimated true width, grading 69.53 g/t
Ag, 0.87% Pb, 0.28% Zn, 0.02% Cu, equivalent to 98.7 g/t AgEq.
Vein 1 returned 4.12 meters estimated true width grading 209.78 g/t Ag, 2.10% Pb, 0.61% Zn, 0.01% Cu (274.5 g/t AgEq),
representing the highest-value internal interval within the broader mineralized zone.
Vein 3 returned 2.64 meters estimated true width grading 140.37 g/t Ag, 1.25% Pb, 0.12% Zn, 0.01% Cu (172.1 g/t AgEq).
An additional tensional structure returned 2.85 meters estimated true width grading 94.42 g/t Ag, 1.25% Pb, 0.33% Zn,
0.01% Cu (132.4 g/t AgEq).
The intercept lies at an approximate elevation of 4,160 masl, approximately 60 meters below the last level recognized by
Buenaventura at Level 210 (4,220 masl), confirming down-dip continuity of the Blenda Rubia polymetallic system.
The results support the interpretation of Blenda Rubia as a broader polymetallic corridor comprising principal veins,
tensional structures, moderate stockwork, silicified horses and altered wall rock, rather than mineralization restricted to
discrete veins.
Drill hole DDH-BR-016 recognized a mineralized structural zone from 179.30 meters to 283.50 meters, corresponding to 104.20
meters apparent width and 40.71 meters estimated true width. Across this broad interval, average grades were 69.53 g/t Ag,
0.87% Pb, 0.28% Zn and 0.02% Cu (98.7 g/t AgEq).
These results confirm that mineralization at Blenda Rubia is not restricted to discrete veins, but instead develops within a broader
mineralized corridor comprising principal veins, tensional structures, moderate stockwork, silicified horses and altered wall rock.
Importantly, when viewed together with previously reported wide intercepts such as DDH-BR-003, DDH-BR-005 and DDH-BR-
009, DDH-BR-016 indicates that these broad mineralized packages are not isolated local occurrences. Rather, they appear to be a
repetitive feature of the system that may support project scale-up and wider mining fronts in selected sectors as exploration
advances.
Figure 1. Longitudinal Section of Blenda Rubia
Table 1. Blenda Rubia Drill Hole Collar Locations and Orientations
Drillhole Name Easting Northing Elevation Azimuth Dip Length
DDH-BR-001 504723 8550666 4428 175 -65.900 299.8
DDH-BR-002 504721 8550667 4428 217 -70.000 382.0
DDH-BR-003 504589 8550506 4425 10 -74.800 242.8
DDH-BR-004 504588 8550506 4425 318 -77.496 320.5
DDH-BR-005 504590 8550506 4425 285 -53.000 500.5
DDH-BR-006 504589 8550507 4425 55 -64.000 329.5
DDH-BR-007 504589 8550506 4425 345 -78.000 539.7
DDH-BR-008 504588 8550506 4425 325 -70.000 213.3
DDH-BR-009 504588 8550507 4425 325 -75.000 244.6
DDH-BR-010 504590 8550505 4425 35 -70.000 215.4
DDH-BR-011 504590 8550507 4425 305 -70.000 251.6
DDH-BR-012 504590 8550507 4425 182 -46.000 200.0
DDH-BR-013 504588 8550506 4425 235 -46.000 150.0
DDH-BR-014 504834 8550504 4383 325 -65.000 182.4
DDH-BR-015 504835 8550503 4383 45 -65.000 220.0
DDH-BR-016 504835 8550504 4383 0 -75.000 300.0
Note:
1. Table 1 summarizes drill hole collar coordinates, drilled azimuth and dip, and final hole length for the Blenda Rubia drill holes
referenced in this news release.
Table 2. Results from DDH-BR-016
Structure From (m) To (m)
Apparent
Width
(m)
Estimated
True
Width
(m)
Ag (g/t) Pb (%) Zn (%) Cu (%) AgEq
(g/t)
Mineralized
zone 179.30 283.50 104.20 40.71 69.53 0.87 0.28 0.02 98.7
Includes
Vein 3 215.15 221.40 6.25 2.64 140.37 1.25 0.12 0.01 172.1
Includes
Vein 1 228.70 238.45 9.75 4.12 209.78 2.10 0.61 0.01 274.5
Includes
Tensional
structure
246.15 252.90 6.75 2.85 94.42 1.25 0.33 0.01 132.4
Notes:
1. Results were obtained from external laboratory analyses. Estimated true widths are based on the Company's current geological
interpretation and ongoing vein modelling and may be adjusted as interpretation is refined.
2. AgEq note: Silver-equivalent grade is calculated on a metal-price basis (recoveries not applied) as AgEq (g/t) = Ag + [(Pb% ×
20.94) + (Zn% × 28.66) + (Cu% × 94.80)] ÷ 0.9645, using assumed prices of US$0.96/g Ag, US$0.95/lb Pb, US$1.30/lb Zn and
US$4.30/lb Cu (to be confirmed against the official price deck).
Table 3. Drill Intercept Summary from the Current Geological Interpretation at Blenda Rubia
HOLE ID
Intercepts (m)
Vein
From To Apparent width Real width Ag (g/T) Pb (%) Zn (%) Cu (%)
DDH-BR-001 260.40 264.95 4.55 1.41 103.43 1.42 0.04 0.003 Composite
Includes
260.40 263.10 2.70 0.83 79.94 0.87 0.04 0.002 Undefined
263.50 264.95 1.45 0.45 175.14 2.82 0.05 0.005 Undefined
DDH-BR-002 366.20 368.40 2.20 0.75 102.73 1.27 0.02 0.002 Composite
DDH-BR-003 186.70 241.55 54.85 17.86 79.86 0.77 0.13 0.004 Composite
Includes
187.70 198.50 10.80 2.80 289.27 2.47 0.34 0.003 Vein 3
203.50 206.35 2.85 0.93 49.82 0.62 0.18 0.003 Vein 1
DDH-BR-005 443.40 478.75 35.35
Unknown
94.92 1.82 1.25 0.233 Composite
Includes
443.40 448.10 4.70 105.77 1.25 1.25 0.171 Undefined
451.90 454.55 2.65 99.43 1.39 1.03 0.356 Undefined
469.55 478.75 9.20 256.35 5.48 3.40 0.650 Undefined
DDH-BR-006 239.25 245.65 6.40 2.19 51.32 0.73 0.94 0.015 Undefined
Includes 239.25 240.35 1.10 0.38 151.60 1.72 0.98 0.051 Undefined
243.35 244.45 1.10 0.38 113.64 1.86 3.98 0.003 Undefined
DDH-BR-007 275.77 283.94 8.17 1.42 92.35 0.73 0.04 0.002 Composite
Includes 275.77 279.75 3.98 0.69 78.94 0.59 0.01 0.000 Vein 3
280.65 282.45 1.80 0.31 53.37 0.35 0.01 0.001 Vein 1
DDH-BR-008 110.25 117.90 7.65 2.74 43.87 2.04 1.87 0.217 Composite
Includes 135.00 138.45 3.45 1.24 273.82 3.22 7.97 0.016 Vein 3
148.00 152.70 4.70 1.84 Vein 1
DDH-BR-009 163.50 214.48 50.98 16.60 38.51 0.77 0.54 0.007 Composite
Includes 175.65 181.07 5.42 1.76 94.80 1.42 1.37 0.001 Vein 3
209.80 214.48 4.68 1.37 121.16 1.44 0.12 0.006 Vein 1
DDH-BR-010 165.04 185.07 20.03 6.85 74.76 2.44 0.60 0.004 Composite
Includes 165.04 171.03 5.99 1.65 95.35 1.98 0.59 0.007 Vein 3
176.38 185.07 8.69 3.81 72.43 2.70 0.18 0.002 Vein 1
DDH-BR-011 150.40 153.30 2.90 314.13 5.64 2.99 0.05 BackFill
DDH-BR-014 149.16 157.65 8.49 4.12 171.48 2.15 0.43 0.030 Composite
Includes 149.16 153.40 4.24 2.06 210.69 2.45 0.36 0.020 Vein 3
153.40 156.88 3.48 1.69 156.00 2.17 0.59 0.040 Vein 1
DDH-BR-015 222.45 224.45 2.00 10.12 0.50 0.18 0.010 Vein 1
DDH-BR-016 179.30 283.50 104.20 40.71 77.04 0.87 0.27 0.020 Composite
Includes 215.15 221.40 6.25 1.30 173.37 1.29 0.11 0.010 Vein 3
228.70 238.45 9.75 4.12 234.31 2.11 0.59 0.010 Vein 1
Notes:
1. "Composite" refers to the combined interval formed by Vein 1, Vein 3 and the intervening mineralized fill of veinlets, breccias
and disseminated sulphides, where recognized.
2. Estimated true widths are being calculated from the Company's current geological interpretations and ongoing vein modelling
and may change as the interpretation is refined.
3. DDH-BR-005 was drilled well away from the main drill pattern. Because the local orientation of the vein system at the
intercept point is not yet sufficiently constrained, only apparent width is reported for that hole at this stage.
4. DDH-BR-004 intercepted an extension of a barren post-mineral dyke and is therefore not included in this report.
5. DDH-BR-012 and DDH-BR-013 were drilled to test a geophysical anomaly located south of the Blenda Rubia vein system,
outside the main target corridor reported in this table, and did not return significant results relevant to the current vein
interpretation.
Geological Interpretation
The results from DDH-BR-016 reinforce the interpretation of Blenda Rubia as a larger-scale, mesothermal polymetallic lode vein
system in which mineralization is distributed across a broad structural corridor and not solely within a single discrete vein. The
broad interval intersected in DDH-BR-016 is consistent with the Company's previously reported wide intercepts in DDH-BR-003,
DDH-BR-005 and DDH-BR-009, supporting the view that these wide veining packages are repetitive and laterally meaningful
components of the system rather than isolated local zones.
Within the interval from 215.15 meters to 221.40 meters, corresponding to Vein 3, the hole intersected a hydrothermal breccia
vein with patches of galena and subrounded clasts of silicified tuff. In the interval from 228.70 meters to 238.45 meters,
associated with Vein 1, the hole intersected a hydrothermal breccia vein with galena over sphalerite, pyrite as fine spots, later gray
silica injection and clasts with alteration rims.
This configuration indicates that the principal veins do not define the external limits of the system, but instead form part of the
broader mineralized system. Accordingly, Blenda Rubia may be interpreted as a polymetallic mesothermal vein corridor with the
potential to develop wider mineable widths in selected sectors. The recurrence of wide intercepts in multiple holes also
strengthens the case that the project can be scaled beyond a strictly narrow-vein concept as drilling continues.
Significance of the Results
The significance of DDH-BR-016 lies in its confirmation of mineralized continuity at depth while maintaining substantial
thickness and demonstrating potential for further extension of the lode system. Positioned approximately 60 meters below the last
level recognized by Buenaventura, the hole adds depth confirmation to a pattern of repetitive wide intercepts and demonstrates
that the broader mineralized lode vein intercepts are in multiple locations.
The presence of hydrothermal brecciation in the Blenda Rubia vein lode raises the possibility that there could be a mineralized
porphyry system nearby as a source. Mineralized porphyries have been identified in the Huachocolpa District and may represent
the source of nearby vein mineralization.
Taken together with DDH-BR-003, DDH-BR-005 and DDH-BR-009, the results support the interpretation that Blenda Rubia lode
contains repetitive, wide mineralized sectors with higher-value structures such as Vein 1 and Vein 3. This repetition is important
because it suggests the project may be capable of supporting larger-scale development and broader mining fronts by the Company
in selected areas.
CEO Statement
José M. Garcia, CEO of Silver X, commented:
"DDH-BR-016 is important because it confirms that the broad mineralized widths we have been seeing at Blenda Rubia are not
isolated local anomalies. When viewed together with earlier wide intercepts such as DDH-BR-003, DDH-BR-005 and DDH-BR-
009, these results reinforce our view that Blenda Rubia is evolving into a scalable polymetallic vein project with the potential to
support broader mining fronts than a conventional narrow-vein model would suggest.
For Silver X, that matters because our strategy is to build a pipeline of mining areas capable of supporting sustainable production
growth across Nueva Recuperada. As we continue surface drilling and begin underground rehabilitation to open additional drill
positions from mine workings, we expect to improve our understanding of the western extension of the system and continue
advancing Blenda Rubia in line with our objective of building toward approximately 6 million silver-equivalent ounces of annual
production."
Next Steps
Silver X plans to continue advancing Blenda Rubia on two parallel fronts. The Company will continue surface drilling while
initiating underground rehabilitation works to prepare drill chambers and improve access for additional diamond drilling from
underground. These next steps are intended to better define the western structures, refine the geometry of the broad mineralized
corridor and support the next stage of project scale-up.
Continue surface drilling to test continuity and extension of the mineralized lode.
Initiate rehabilitation of underground workings to prepare drill chambers and improve internal access.
Define the western continuity of the Blenda Rubia lode through additional underground diamond drilling from mine
workings.
Integrate new drilling data into the geological model to refine lode geometry and mine planning potential.
Related Blenda Rubia news releases:
Silver X Extends Blenda Rubia Mineralization 160 Metres Below Historic Workings (January 26, 2026);
Silver X Intersects up to 17.86 m True Width at Blenda Rubia (April 16, 2026).
Quality Assurance and Quality Control
Drill core from Blenda Rubia was logged, photographed, sawn and sampled by Silver X personnel under Company protocols.
Sample intervals were selected based on geological criteria including vein, breccia, sulphide distribution and alteration intensity.
Analytical work referenced in this release was completed using both the Company's internal laboratory and Bureau Veritas
Minerals (Peru), depending on the hole and sample batch. Silver X's QA/QC program includes the insertion of certified reference
materials, blanks and duplicates, together with chain-of-custody procedures and periodic external check assays.
As geological interpretation and vein modelling remain in progress, estimated true widths referenced in this release are subject to
refinement.
Qualified Person
Mr. A. David Heyl, B.Sc., C.P.G., a Qualified Person under NI 43-101, has reviewed and approved the technical content of this
news release on behalf of Silver X. Mr. Heyl is a consultant to the Company. The technical disclosure in this release is based
principally on the Company's current NI 43-101 Preliminary Economic Assessment for the Nueva Recuperada Project.
Cautionary Note regarding Production without Mineral Reserves
The decision to commence production at the Nueva Recuperada Project and the Company's ongoing mining operations as
referenced herein (the "Production Decision and Operations") are based on economic models prepared by the Company in
conjunction with management's knowledge of the property and the existing estimate of mineral resources on the property. The
Production Decision and Operations are not based on a preliminary economic assessment, a pre-feasibility study or a feasibility
study of mineral reserves demonstrating economic and technical viability. Accordingly, there is increased uncertainty and
economic and technical risks of failure associated with the Production Decision and Operations, in particular: the risk that
mineral grades will be lower than expected; the risk that additional construction or ongoing mining operations are more difficult
or more expensive than expected; and production and economic variables may vary considerably, due to the absence of a detailed
economic and technical analysis in accordance with NI 43-101.
About Silver X
Silver X is a growing silver producer building a multi-asset precious metals platform in Peru. The Company's portfolio includes
the Nueva Recuperada Project, a district-scale land package of over 20,000 hectares with two mining units and more than 200
exploration targets, as well as the recently acquired Pampas Project.
With existing production, scalable expansion opportunities, and significant exploration upside, Silver X is positioned for
continued growth and long-term value creation. For more information, visit our website at www.silverxmining.com.
ON BEHALF OF THE BOARD
José M. Garcia
CEO and Director
For further information, please contact:
Susan Xu
Investor Relations
Cautionary Statement Regarding "Forward-Looking" Information
This press release contains forward-looking information within the meaning of applicable Canadian securities legislation
("forward-looking information"). Generally, forward-looking information can be identified by the use of forward-looking
terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts",
"intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain acts,
events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". All information contained in this
press release, other than statements of current and historical fact, is forward looking information. Forward-looking information
contained in this press release may include, without limitation, exploration plans, results of operations, expected performance at
the Project, the Company's belief that the Tangana system will provide considerable resource expansion potential, that the
Company will be able to mine the Tangana Mining Unit in an economic manner, and the expected financial performance of the
Company.
The following are some of the assumptions upon which forward-looking information is based: that general business and
economic conditions will not change in a material adverse manner; demand for, and stable or improving price for the
commodities we produce; receipt of regulatory and governmental approvals, permits and renewals in a timely manner; that the
Company will not experience any material accident, labour dispute or failure of plant or equipment or other material disruption in
the Company's operations at the Project and Nueva Recuperada Plant; the availability of financing for operations and
development; the Company's ability to procure equipment and operating supplies in sufficient quantities and on a timely basis;
that the estimates of the resources at the Project and the geological, operational and price assumptions on which these and the
Company's operations are based are within reasonable bounds of accuracy(including with respect to size, grade and recovery); the
Company's ability to attract and retain skilled personnel and directors; and the ability of management to execute strategic goals.
Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual
results, level of activity, performance or achievements of the Company, as the case may be, to be materially different from those
expressed or implied by such forward-looking information, including but not limited to those risks described in the Company's
annual and interim MD&As and in its public documents filed on SEDAR+ at www.sedarplus.ca from time to time. Forward-
looking statements are based on the opinions and estimates of management as of the date such statements are made. Although the
Company has attempted to identify important factors that could cause actual results to differ materially from those contained in
forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There
can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially
from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward- looking information.
The Company does not undertake to update any forward-looking information, except in accordance with applicable securities
laws.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture
Exchange) accepts responsibility for the adequacy or accuracy of this release.
SOURCE: Silver X Mining Corp.