Silver Mountain Reports New Underground Channel Sampling Results from the Meteysaca Vein, Reliquias MINE
SILVER MOUNTAIN REPORTS NEW
UNDERGROUND CHANNEL SAMPLING
RESULTS FROM THE METEYSACA VEIN,
RELIQUIAS MINE
/NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES OR DISSEMINATION IN OR INTO
THE UNITED STATES
/
Highlights:
0.95m
@ 535.26 g/t Ag, 6.43% Pb, 6.26% Zn, 1.37% Cu, and 0.58 g/t Au
0.90m
@ 721.27 g/t Ag, 1.91% Pb, 2.62% Zn, 1.42% Cu, and 0.98 g/t Au
1.90m
@ 313.06 g/t Ag, 2.51% Pb, 2.47% Zn, 0.76% Cu, and 1.37 g/t Au
0.63m
@ 873.82 g/t Ag, 2.50% Pb, 3.23% Zn, 2.09% Cu, and 0.13 g/t Au
TORONTO
,
Feb. 14, 2023
/CNW/ - Silver Mountain Resources Inc. (TSXV: AGMR) (OTCQB:
AGMRF) (BVL: AGMR) ("
Silver Mountain
", "
AGMR
" or the "
Company
") is pleased to announce
new results from underground channel sampling at the Reliquias silver mine in Huancavelica, central
Peru
. To complement the drill campaigns and to facilitate the conversion of additional historic
resources into a National Instrument 43-101 –
Standards of Disclosure for Mineral Projects
("NI 43-
101") compliant mineral resource, an extensive underground mapping and sampling program is being
carried out at Reliquias. Several existing drifts, sublevels, and raises were mapped and
systematically sampled in channels cut across the exposed veins.
Geochemical assays have been received for 436 rock channel samples taken from Level 480 of the
Meteysaca Vein and adjacent workings, including a ramp and a raise that connect to the haulage
level 415 located approximately
67 m
below (Fig.1). This zone of well-developed mineralization in the
Meteysaca Vein is exposed over approximately
148 m
horizontally and additionally
30 m
along the
subvertical raise.
Samples were taken using an electric percussion hammer to produce a channel perpendicular
across the veins and mineralized structures. By cutting a continuous channel approximately 3-5 cm
deep by 10 cm wide, the channel samples essentially equal a drill core in their significance for future
resource estimation. Where the structure is exposed along the back of the drift, channels were cut
across the vein systematically every
4 m
. Channel lengths range between
0.27 m
and
1.97 m
.
Figure 1: Isometric view of the Level 480, Meteysaca vein, at the Reliquias silver mine, showing the
location of systematic channel sampling along the main haulage level, ramp, raise, and adjacent
workings. Individual channel samples are shown within seven zones, colour-coded according to Ag
values. Length, average thickness, and metal grades of each zone are provided in Table 1 in the text
below. In the inset map, underground workings, main mineralized veins, and drill hole traces from the
2022 drill program are displayed, with the location of the Level 480, Meteysaca vein indicated by a
grey rectangle. (CNW Group/Silver Mountain Resources Inc.)
The underground sampling results from the Meteysaca Vein confirm the continuity of high-grade
polymetallic mineralization within the structure, with significant concentrations of silver (Ag), lead
(Pb), zinc (Zn), and copper (Cu). Gold grades, ranging on average between 0.38 g/t and 0.98 g/t in
zones 2 to 6, correlate well with previously reported values from Level 415 (see news release
September 8, 2022
). To highlight the consistency of this vein system, the grades and widths of
channels were averaged over each of the seven zones shown in Fig. 1.
Table 1: Weighted assay results from systematic channel sampling along the Meteysaca Vein,
calculated for each of the zones displayed in Fig.1. Zones 1-6 are located along Meteysaca vein,
while zone 7 is situated on a vein splay. (CNW Group/Silver Mountain Resources Inc.)
Alfredo Bazo
, President and CEO, commented:
"Having completed the sampling program on
Levels 415 and 480 of the Meteysaca vein, we are delighted about the consistent development of
this structure with regard to grades and vein widths.
The stopes between both haulage levels
remain intact and were partially developed for extraction (Fig.1 and 2).
We
are planning to include
this zone in the initial mine development work programmed to start in late Q3 2023."
Torsten Danne
, Director of Exploration, added:
"To emphasize the potential of this vein to host
additional high-grade mineralization, the longitudinal section in Fig. 2 (see below) shows that the
Meteysaca structure has seen almost no extraction above Levels 520 and 560. We are presently
rehabilitating Level 520, with detailed mapping and sampling programmed to start next month. We
expect that this will allow us to add silver ounces beyond the mineralization confirmed to date,
which currently extends over
210 m
vertically between Level 480 and the deepest hole of our 2022
drill campaign."
Figure 2: Longitudinal section of the Meteysaca vein, Reliquias silver mine, showing the location of
systematic channel sampling (indicated by blue rectangles) along the Levels 415 and 480. Pierce
points of completed drill holes are shown as blue circles. (CNW Group/Silver Mountain Resources
Inc.)
Figure 3: Example of Meteysaca structure exposed along the back of Level 480, displaying a
banded quartz vein with visible galena, silver sulpho-salts, sphalerite, and secondary oxides. Field of
view is approximately 2.00 m across. (CNW Group/Silver Mountain Resources Inc.)
The following table provides more detail regarding the channel sample results from Level 480 of the
Meteysaca Vein structure.
Table 2: Assay results of systematic channel sampling, Meteysaca Vein, Reliquias mine, on Level
480, adjacent ramp, and raise. Channels shown without a zone ID are located outside the main
workings and were not included in the calculation of weighted averages for each zone. (CNW
Group/Silver Mountain Resources Inc.)
Table 2: Assay results of systematic channel sampling, Meteysaca Vein, Reliquias mine, on Level
480, adjacent ramp, and raise. Channels shown without a zone ID are located outside the main
workings and were not included in the calculation of weighted averages for each zone. (CNW
Group/Silver Mountain Resources Inc.)
On Behalf of the Board of Directors of Silver Mountain Resources Inc.
Alfredo Bazo
, Chief Executive Officer and Director
Qualified Person
The scientific and technical information contained in this news release has been reviewed and
approved by
Antonio Cruz
, an independent consultant of the Company and a Qualified Person within
the meaning of NI 43-101.
About Silver Mountain
Silver Mountain Resources Inc. is a silver explorer and mine developer planning to restart production
at the Reliquias underground mine and undertake exploration activities at its prospective silver
camps at the Castrovirreyna Project in Huancavelica,
Peru
.
For additional information in respect of the Castrovirreyna Project, please refer to the Company's
technical report, titled National Instrument 43-101 Technical Report—Castrovirreyna Project,
Peru
,
dated
October 6, 2021
, amended
November 18, 2021
, effective date
August 17, 2021
, available at
https://sedar.com
.
Silver Mountain's subsidiary Sociedad Minera Reliquias S.A.C. owns 100% of its concessions and
holds more than 27,000 hectares in the district of Castrovirreyna, Huancavelica,
Peru
.
Sampling, QA/QC and Analytical Procedures
Silver Mountain follows systematic and rigorous sampling and analytical protocols which meet
industry standards. These protocols are summarized below.
All channel samples were collected with an electric percussion hammer and do not exceed
1.0 m
in
length. Channels are broken at obvious geologic boundaries to correctly separate rock types and
mineralization styles. The sample bags were sealed with a plastic zip tie and identified with a unique
sample number, pending shipment to a certified laboratory sample preparation facility. Samples are
sent by batch to the ALS laboratory in
Lima
for assaying. Silver Mountain independently inserts
certified control standards (purchased from OREAS and Target Rocks), fine and coarse blanks, and
duplicates into the sample stream to monitor data quality. These standards are inserted "blindly" to
the laboratory in the sample sequence prior to departure from the storage facilities. At the
laboratory samples are dried, crushed, and pulverized and then analyzed using a fire assay-AA finish
analysis for gold and a full multi-acid digestion with ICP-AES analysis for other elements. Samples
with results that exceed maximum detection values for the main elements of interest (Ag, Zn, Pb, Cu,
Au) are re-analyzed using precise ore-grade ICP analytical techniques, while high gold values are re-
analyzed by fire assay with a gravimetric finish.
Forward Looking Statements
This news release contains forward-looking statements and forward-looking information within the
meaning of Canadian securities legislation (collectively, "
forward-looking statements
") that relate
to Silver Mountain's current expectations and views of future events. Any statements that express, or
involve discussions as to, expectations, beliefs, plans, objectives, assumptions or future events or
performance (often, but not always, through the use of words or phrases such as "will likely result",
"are expected to", "expects", "will continue", "is anticipated", "anticipates", "believes", "estimated",
"intends", "plans", "forecast", "projection", "strategy", "objective" and "outlook") are not historical
facts and may be forward-looking statements and may involve estimates, assumptions and
uncertainties which could cause actual results or outcomes to differ materially from those expressed
in such forward-looking statements. No assurance can be given that these expectations will prove to
be correct and such forward-looking statements included in this news release should not be unduly
relied upon. These statements speak only as of the date of this news release.
Forward-looking statements are based on a number of assumptions and are subject to a number of
risks and uncertainties, many of which are beyond Silver Mountain's control, which could cause
actual results and events to differ materially from those that are disclosed in or implied by such
forward-looking statements. Such risks and uncertainties include, but are not limited to, the factors
set forth under "
Forward-Looking Statements"
and "
Risk Factors
" in the Company's final prospectus
dated
January 26, 2022
, and other disclosure documents available on the Company's profile at
www.sedar.com
. Silver Mountain undertakes no obligation to update or revise any forward-looking
statements, whether as a result of new information, future events or otherwise, except as may be
required by law. New factors emerge from time to time, and it is not possible for Silver Mountain to
predict all of them or assess the impact of each such factor or the extent to which any factor, or
combination of factors, may cause results to differ materially from those contained in any forward-
looking statement. Any forward-looking statements contained in this news release are expressly
qualified in their entirety by this cautionary statement.
SOURCE
Silver Mountain Resources Inc.
View original content to download multimedia:
http://www.newswire.ca/en/releases/archive/February2023/14/c6979.html
%SEDAR: 00052252E
For further information:
Alfredo Bazo, President, CEO & Director, [email protected]; Jean Pierre
Fort, Chief Financial Officer, [email protected]; Silver Mountain Resources Inc, 82 Richmond Street
East, Toronto, ON M5C 1P1, (647) 262-4017, [email protected], www.agmr.ca
CO: Silver Mountain Resources Inc.
CNW 07:00e 14-FEB-23