Silver Mountain Reports Additional Underground Channel Sampling Results from Its Reliquias MINE
SILVER MOUNTAIN REPORTS ADDITIONAL
UNDERGROUND CHANNEL SAMPLING
RESULTS FROM ITS RELIQUIAS MINE
/NOT FOR DISTRIBUTION TO U.S. NEWSWIRE SERVICES OR DISSEMINATION IN OR INTO
THE UNITED STATES
/
Highlights:
1.65m
@ 128.1 g/t Ag, 0.21% Cu, 7.70% Pb, 10.88% Zn, and 0.15 g/t Au
2.17m
@ 173.0 g/t Ag, 0.11% Cu, 1.73% Pb, 4.37% Zn, and 0.67 g/t Au
1.18m
@ 133.4 g/t Ag, 0.16% Cu, 8.98% Pb, 9.62% Zn, and 0.12 g/t Au
1.40m
@ 160.0 g/t Ag, 0.40% Cu, 4.84% Pb, 5.96% Zn, and 0.16% Au
TORONTO
,
Jan. 17, 2023
/CNW/ - Silver Mountain Resources Inc. (TSXV: AGMR) (OTCQB:
AGMRF) (BVL: AGMR) ("
Silver Mountain
", "
AGMR
" or the "
Company
") is pleased to announce
new results from underground channel sampling at the Reliquias silver mine in Huancavelica, central
Peru
. To complement the drill campaign and to facilitate the conversion of additional historic
resources into a National Instrument 43-101 –
Standards of Disclosure for Mineral Projects
("NI 43-
101") compliant mineral resource, an extensive underground mapping and sampling program is being
carried out at Reliquias. Several existing drifts, sublevels, and raises were mapped and
systematically sampled in channels cut across the exposed veins.
Assays have been received for 299 rock channel samples taken along
175 m
of the Sublevel 735-2,
part of the
390 m
level of the Matacaballo structure (Fig.1 to 3). A zone of well-developed
mineralization in the Matacaballo Vein is exposed over
87 m
along the western part of sublevel 735-
2. Further east, the vein displays an irregular thickness, with lower metal contents. The length of the
mineralized shoot on this sublevel and the reported metal grades show a close correlation to the
results of the sublevel 735-1 located approximately
20 m
below (see previously published release,
December 7, 2022
). The unmined stopes of both drifts are located above the main
390 m
haulage
level and have already been developed for mining (Fig.1).
Figure 1: Oblique three-dimensional view of the 390 m – level, Matacaballo Vein, and the two
sublevels 735-1 and 735-2 developed above. The location of channel samples collected across the
back of the drifts are indicated in green. Surveying of underground workings was carried out utilizing
a drone-based LIDAR system (3D laser scanning). Inset map shows location of detailed view within
the Reliquias mine. (CNW Group/Silver Mountain Resources Inc.)
Samples were taken using an electric percussion hammer to produce a channel perpendicular
across the veins and mineralized structures. By cutting a continuous channel approximately 3-5 cm
deep by 10 cm wide, the channel samples are essentially equal to a drill core in their significance for
future resource estimation. Where the structure is exposed along the back of the drift, channels
were cut across the vein systematically every
4 m
. Channel lengths range between
0.30 m
and
3.58
m
, not including samples collected from the adjacent wall rocks.
The underground sampling results from this part of the Matacaballo Vein confirm the continuity of
well-developed polymetallic mineralization within the structure, with significant concentrations of silver
(Ag), lead (Pb), zinc (Zn), gold (Au) and copper (Cu). To highlight the continuity of this vein system,
the grades and widths of individual channels (Tab.1) were averaged over the
87 m
-long well-
mineralized shoot exposed in the western half of the sublevel. Weighted metal grades reached 71.1
g/t Ag, 2.34% Pb, 4.81% Zn, 0.14% Cu and 0.35 g/t Au with an average channel width of
1.59 m
.
Individual Ag assays returned a maximum value of 621 g/t Ag. A total of 17 individual rock channel
samples assayed over 0.5 g/t Au, with a maximum value of 7.64 g/t Au.
Figure 2: Plan view of sublevel 735-2 at the Reliquias silver mine, showing the location of systematic
channel sampling along the Matacaballo vein. Individual channel samples are shown, colour-coded
according to silver values. The mapped vein structure is shown in light red. In the inset map,
underground workings, main mineralized veins, and drill hole traces from the ongoing drill program
are displayed. (CNW Group/Silver Mountain Resources Inc.)
Figure 3: Plan view of sublevel 735-2 at the Reliquias silver mine, showing the location of systematic
channel sampling along the Matacaballo vein. Individual channel samples are shown, colour-coded
according to gold values. The mapped vein structure is shown in light red. In the inset map,
underground workings, main mineralized veins, and drill hole traces from the ongoing drill program
are displayed. (CNW Group/Silver Mountain Resources Inc.)
The Matacaballo structure exhibits hydrothermal brecciation, irregular banding, and crustiform
textures typical of intermediate sulphidation veins. Sulphide minerals are present as semi-massive
pods, fine veinlets, or in disseminated form, within a matrix composed of several generations of
quartz, with minor rhodochrosite (Fig.4). Galena, sphalerite, silver sulpho-salts, lesser disseminated
chalcopyrite, and minor pyrite were encountered. In the hanging as well as the foot wall, the central
Matacaballo vein is accompanied by 20 to 50 cm wide splays, which show brecciation and contain
sulphides as matrix or in cockade textures around argillized or silicified wall rock clasts with
disseminated pyrite.
Figure 4: Example of channel sampling along the back of Sublevel 735-2, Matacaballo Vein. Image
shows vein sample 10919 (part of channel CHN-43), which returned 154 g/t Ag, 11.40% Pb, 16.00%
Zn, 0.37% Cu and 0.19 g/t Au over 27 cm width. Strongly brecciated vein, with abundant galena,
sphalerite, and grey quartz as breccia matrix, quartz vein fragments, late quartz and rhodochrosite
veining. (CNW Group/Silver Mountain Resources Inc.)
The following table provides more detail regarding the channel sample results from sublevel 735-2 of
the Matacaballo Vein structure.
Table 1: Assay results of systematic channel sampling, Sublevel 735-2, 390m level, Matacaballo
Vein, Reliquias mine. (CNW Group/Silver Mountain Resources Inc.)
On Behalf of the Board of Directors of Silver Mountain Resources Inc.
Alfredo Bazo
, Chief Executive Officer and Director
Qualified Person
The scientific and technical information contained in this news release has been reviewed and
approved by
Antonio Cruz
, an independent consultant of the Company and a Qualified Person within
the meaning of NI 43-101.
About Silver Mountain
Silver Mountain Resources Inc. is a silver explorer and mine developer planning to restart production
at the Reliquias underground mine and undertake exploration activities at its prospective silver
camps at the Castrovirreyna Project in Huancavelica,
Peru
.
For additional information in respect of the Castrovirreyna Project, please refer to the Company's
technical report, titled National Instrument 43-101 Technical Report—Castrovirreyna Project,
Peru
,
dated
October 6, 2021
, amended
November 18, 2021
, effective date
August 17, 2021
, available at
https://sedar.com
.
Silver Mountain's subsidiary Sociedad Minera Reliquias S.A.C. owns 100% of its concessions and
holds more than 27,000 hectares in the district of Castrovirreyna, Huancavelica,
Peru
.
Sampling, QA/QC and Analytical Procedures
Silver Mountain follows systematic and rigorous sampling and analytical protocols which meet
industry standards. These protocols are summarized below.
All channel samples were collected with an electric percussion hammer and do not exceed
1.0 m
in
length. Channels are broken at obvious geologic boundaries to correctly separate rock types and
mineralization styles. The sample bags were sealed with a plastic zip tie and identified with a unique
sample number, pending shipment to a certified laboratory sample preparation facility. Samples are
sent by batch to the ALS laboratory in
Lima
for assaying. Silver Mountain independently inserts
certified control standards (purchased from OREAS and Target Rocks), fine and coarse blanks, and
duplicates into the sample stream to monitor data quality. These standards are inserted "blindly" to
the laboratory in the sample sequence prior to departure from the storage facilities. At the
laboratory samples are dried, crushed, and pulverized and then analyzed using a fire assay-AA finish
analysis for gold and a full multi-acid digestion with ICP-AES analysis for other elements. Samples
with results that exceed maximum detection values for the main elements of interest (Ag, Zn, Pb, Cu,
Au) are re-analyzed using precise ore-grade ICP analytical techniques, while high gold values are re-
analyzed by fire assay with a gravimetric finish.
Forward Looking Statements
This news release contains forward-looking statements and forward-looking information within the
meaning of Canadian securities legislation (collectively, "
forward-looking statements
") that relate
to Silver Mountain's current expectations and views of future events. Any statements that express, or
involve discussions as to, expectations, beliefs, plans, objectives, assumptions or future events or
performance (often, but not always, through the use of words or phrases such as "will likely result",
"are expected to", "expects", "will continue", "is anticipated", "anticipates", "believes", "estimated",
"intends", "plans", "forecast", "projection", "strategy", "objective" and "outlook") are not historical
facts and may be forward-looking statements and may involve estimates, assumptions and
uncertainties which could cause actual results or outcomes to differ materially from those expressed
in such forward-looking statements. No assurance can be given that these expectations will prove to
be correct and such forward-looking statements included in this news release should not be unduly
relied upon. These statements speak only as of the date of this news release.
Forward-looking statements are based on a number of assumptions and are subject to a number of
risks and uncertainties, many of which are beyond Silver Mountain's control, which could cause
actual results and events to differ materially from those that are disclosed in or implied by such
forward-looking statements. Such risks and uncertainties include, but are not limited to, the factors
set forth under "
Forward-Looking Statements"
and "
Risk Factors
" in the Company's final prospectus
dated
January 26, 2022
, and other disclosure documents available on the Company's profile at
www.sedar.com
. Silver Mountain undertakes no obligation to update or revise any forward-looking
statements, whether as a result of new information, future events or otherwise, except as may be
required by law. New factors emerge from time to time, and it is not possible for Silver Mountain to
predict all of them or assess the impact of each such factor or the extent to which any factor, or
combination of factors, may cause results to differ materially from those contained in any forward-
looking statement. Any forward-looking statements contained in this news release are expressly
qualified in their entirety by this cautionary statement.
SOURCE
Silver Mountain Resources Inc.
View original content to download multimedia:
http://www.newswire.ca/en/releases/archive/January2023/17/c2031.html
%SEDAR: 00052252E
For further information:
Alfredo Bazo, President, CEO & Director, [email protected]; Jean Pierre
Fort, Chief Financial Officer, [email protected]; Silver Mountain Resources Inc, 82 Richmond Street
East, Toronto, ON M5C 1P1, [email protected], (647) 262-4017, www.agmr.ca
CO: Silver Mountain Resources Inc.
CNW 07:00e 17-JAN-23