Alamos Gold Intersects High-Grade Mineralization in New Area of Focus Between Eastern and Main Extensions at Island Gold
Alamos Gold Intersects High-Grade Mineralization in New Area of Focus
Between Eastern and Main Extensions at Island Gold
TORONTO, May 09, 2019 -- Alamos Gold Inc. (TSX:AGI; NYSE:AGI) (“Alamos” or the “Company”) today reported new
results from surface and underground exploration and delineation drilling at the Island Gold Mine. Drilling in 2019 continues to
extend high-grade gold mineralization across each of the Main, Western, and Eastern Extensions. All reported drill widths are
true width of the mineralized zones, unless otherwise stated.
• Eastern Extension: high-grade mineralization intersected in a previously untested area between the Eastern
and Main Extensions, within a 500 metre (“m”) gap between Inferred Mineral Resource blocks. This area is
only 1,000 m from surface and relatively close to existing infrastructure. New highlights include:
• 46.11 g/t Au (25.81 g/t cut) over 4.67m (MH18-03);
• Main Extension: high-grade mineralization extended 65 m up-plunge (MH13-5) and 65 m down-plunge (MH17-
04) from the nearest previously reported intersections. High-grade mineralization has been extended over 1,000 m
east of current mine workings and remains open along strike to the east and both up and down-plunge. New highlights
include:
• 71.17 g/t Au (24.53 g/t cut) over 5.10 m (MH13-5);
• 40.75 g/t Au (34.01 g/t cut) over 5.15 m (MH17-04); and
• 30.01 g/t Au (15.13 g/t cut) over 4.96 m (MH12-5).
Note: Drillhole composite intervals reported as “cut” may include higher grade samples which have been cut to 225 g/t Au for
Main and Extension 1 areas, and 160 g/t Au for Extension 2 Area.
“Drill results continue to demonstrate the tremendous growth potential of the Island Gold deposit across multiple areas of
focus. The Main Extension continues to grow and we see excellent potential for this to continue with more than 90% of our
exploration drill holes intersecting gold mineralization along the Island Gold Main Zone. We are also particularly excited about
the potential between the Main and Eastern Extensions having intersected high-grade mineralization in an area that has seen
very little drilling to date. We have started to close the gap between high grade resources in both areas and see excellent
potential for this to continue,” said John A. McCluskey, President and Chief Executive Officer.
2019 Drilling Program – Island Gold Mine
The focus of the 2019 exploration drilling program is to continue to expand the down-plunge and lateral extensions of the Island
Gold deposit with the objective of adding new near mine Mineral Resources across the two-kilometre long Island Gold Main
Zone (Figure 1).
The ongoing exploration program at Island Gold has been successful in extending high grade gold mineralization across each
of the Main, Western, and Eastern Extensions. This has translated into significant growth in Mineral Reserves and Resources
since the November 2017 acquisition of Island Gold as follows (Mineral Reserves and Resources as of December 31, 2018;
see press release dated February 19, 2019):
◾ Mineral Reserves have increased 467,000 ounces before mining depletion, or 255,000 ounces net of mining
depletion, to 1.0 million ounces with Mineral Reserve grades increasing 12% (3.0 million tonnes (“mt”) grading
10.28 g/t Au)
◾ Measured and Indicated Mineral Resources have increased 115%, or 105,000 ounces, to 196,000 ounces with
grades increasing 48% (0.7 mt grading 8.77 g/t Au)
◾ Inferred Mineral Resources have increased 58%, or 577,000 ounces, to 1.6 million ounces with grades
increasing 15% (4.2 mt grading 11.71 g/t Au)
A total of 29,832 m of drilling in 99 holes has been completed thus far in 2019. This includes 13,992 m of surface directional
exploration drilling, 1,119 m of regional exploration drilling, 5,804 m of underground exploration drilling and 8,917 m of
underground delineation drilling. New highlight intercepts can be found in Figures 1 to 4 and Tables 1 to 3 at the end of this
news release.
The 2019 drill program includes 48,000 m of surface directional exploration drilling, 30,000 m of underground exploration
drilling, 35,000 m of delineation drilling, and 917 m of exploration drift development.
Surface and Underground Exploration Drilling
Eastern Extension
Surface directional drilling within the Eastern Extension is focused on testing the area down-plunge and to the east of known
Inferred Resource blocks, between the 850 m and 1150 m vertical depths, and previously reported high-grade intersections
approximately 350 m further to the east (Figure 3).
Three drill holes have been completed in this area to date in 2019, with drill hole MH18-03 intersecting 46.11 g/t Au (25.81 g/t
cut) over 4.67m. This intersection is 200 m down-plunge from the closest Inferred Mineral Resources in the Eastern Extension,
and 300 m vertically above Inferred Mineral Resources defined in the eastern down-plunge extent of the Main Extension.
Testing the potential continuity of high-grade mineralization between the Eastern and Main Extensions will be an ongoing
focus in 2019 with this area having seen limited drilling to date. Two surface directional diamond drill rigs are active in this
area, and will continue with 75 to 100 m spaced step-out drilling. New highlights from the surface drilling program include
(E1E-Zone) (Table 1):
• 46.11 g/t Au (25.81 g/t cut) over 4.67 m (MH18-03);
• 4.45 g/t Au (4.45 g/t cut) over 10.24 m (MH18-02); and
• 6.03 g/t Au (6.03 g/t cut) over 3.65 m (MH18-01).
Main Extension
Surface directional drilling to date in 2019 has been successful in further extending gold mineralization with drill hole spacing
ranging from 50 to 100 m (Figure 2). Gold mineralization has now been extended one kilometre to the east of existing mine
workings. This east plunging high-grade ore shoot remains open laterally, up and down-plunge.
New highlights from the surface and underground exploration drill results include (E1E-Zone) (Tables 1 and 2):
• 71.17 g/t Au (24.53 g/t cut) over 5.10 m (MH13-5);
• 40.75 g/t Au (34.01 g/t cut) over 5.15 m (MH17-04);
• 30.01 g/t Au (15.13 g/t cut) over 4.96 m (MH12-5);
• 38.42 g/t Au (23.78 g/t cut) over 2.75 m (840-548-11);
• 17.52 g/t Au (16.97 g/t cut) over 2.81 m (MH17-03); and
• 12.91 g/t Au (12.91 g/t cut) over 4.57 m (840-548-10).
Drill hole MH13-5 (71.17 g/t Au (24.53 g/t cut) over 5.10 m), returned one of the best surface directional intersections to date in
the Main Extension and also extended high-grade mineralization 65 m up-plunge from the nearest previously drilled intercept.
Drill holes MH17-03 (17.52 g/t Au (16.97 g/t cut) over 2.81m) and MH17-04 (40.75 g/t Au (34.01 g/t cut) over 5.15 m) extended
high-grade gold mineralization 50 m further to the east of the nearest previously drilled intercepts, MH13 (118.58 g/t Au (53.51
g/t cut) over 6.66 m) and MH17-01 (56.60 g/t Au (50.87 g/t cut) over 5.66 m).
Drill hole MH17-05, drilled a further 50 m to the east of MH17-03 and MH17-04, also intersected gold mineralization (2.25 g/t
Au over 6.72 m) within the same zone. Despite the lower grades, visible gold associated with quartz veining was observed in
this interval, confirming presence of gold mineralization another 50 m further to the east.
The 2019 exploration program will continue to focus on further extending high-grade mineralization with the objective of defining
additional Mineral Resources in this area. Underground exploration drilling has also commenced from the 840 level exploration
drift with the objective of testing the area between the Main Extension Inferred Mineral Resources and the Eastern Extension
Mineral Reserve and Resource blocks above. Three surface directional diamond drill rigs remain active in the Main Extension
target area.
Western Extension
Surface drilling in the Western Extension area (Figure 4) has continued to extend high-grade mineralization laterally and down-
plunge from existing Inferred Mineral Resources. Drill hole MH16-04 intersected 5.14 g/t Au (5.14 g/t cut) over 5.28 m,
extending mineralization an additional 75 m from previously reported drill hole MH16-03 (152.07 g/t Au (35.74 g/t cut) over
5.00m). One surface directional diamond drill rig is active in this area. In addition, underground exploration drilling commenced
from the 450 diamond drill bay in the main ramp and was successful in extending high-grade gold mineralization 50 m to the
west of the existing Mineral Reserves. Highlights from the new surface and underground drill results include (C-Zone) (Tables 1
and 2):
• 31.62 g/t Au (31.62 g/t cut) over 3.22 m (450-467-85);
• 10.43 g/t Au (10.43 g/t cut) over 3.34 m (450-467-86); and
• 5.14 g/t Au (5.14 g/t cut) over 5.28 m (MH16-04).
Underground Delineation Drilling
Underground delineation drilling is also being carried out from the 450 drill bay and from the 580 and 840 levels, with the focus
on converting Inferred Mineral Resources to Indicated Mineral Resources.
New highlight drill intercepts include (Table 3):
• 38.99 g/t Au (24.86 g/t cut) over 3.60 m (840-548-18);
• 35.61 g/t Au (29.75 g/t cut) over 3.31 m (840-548-03);
• 22.57 g/t Au (18.74 g/t cut) over 4.56 m (840-542-60);
• 22.44 g/t Au (22.44 g/t cut) over 4.55 m (840-548-05);
• 37.59 g/t Au (37.59 g/t cut) over 2.21 m (580-473-07);
• 13.00 g/t Au (9.60 g/t cut) over 6.38 m (840-542-61);
• 13.38 g/t Au (13.38 g/t cut) over 5.35 m (840-548-14);
• 4.88 g/t Au (4.88 g/t cut) over 7.92 m (840-542-63);
• 16.11 g/t Au (16.11 g/t cut) over 2.18 m (580-473-13); and
• 11.31 g/t Au (11.31 g/t cut) over 3.09 m (840-548-02).
The results from the infill delineation drilling within existing Inferred Mineral Resource blocks continue to confirm the continuity
of the high-grade gold mineralization and are expected to support the conversion of the Mineral Resources to Mineral Reserves
in these areas.
Other Zones
The Island Gold Deposit consists of a number of subparallel mineralized zones, with the majority of Mineral Reserves and
Resources being defined in the C Zone and E1E Zones which constitutes the main production horizons at the Island Gold
mine.
Highlights of new intersections in parallel zones and zones in which the lateral continuity is not yet established (“Unknown
Zone”) include (Tables 1, 2 and 3):
• 29.13 g/t Au (29.13 g/t cut) over 2.80 m (MH17-04);
• 27.07 g/t Au (27.07 g/t cut) over 2.40 m (MH17-03);
• 17.56 g/t Au (17.56 g/t cut) over 2.50 m (840-548-14); and
• 12.38 g/t Au (12.38 g/t cut) over 2.60 m (840-548-01).
Note: Reported composite intervals are core lengths
Additional drilling will be required to further evaluate these high-grade intersections and their potential in both the footwall and
hanging wall of the main C and E1E Zones.
Surface Regional Exploration Drilling
As part of the 2018 regional exploration drilling program, two drill holes were started late in 2018 and completed in 2019. This
included drill hole AR-415-04 which intersected 9.31 g/t over 3.31 m , approximately 250 m west from the most westernly
Inferred Mineral Resource block of the Island Gold Deposit. This gold-bearing structure has similar alteration and mineralization
that is associated with gold mineralization at the Island Gold Mine within the Goudreau Deformation Zone.
Qualified Persons
Chris Bostwick, FAusIMM, Alamos Gold’s Vice President, Technical Services, has reviewed and approved the scientific and
technical information contained in this news release. Chris Bostwick is a Qualified Person within the meaning of Canadian
Securities Administrator’s National Instrument 43-101 (“NI 43-101”).
Exploration programs at the Island Gold Mine are directed by Raynald Vincent, P.Eng., M.G.P., Chief Geologist at the Island
Gold Mine and a Qualified Person within the meaning of NI 43-101.
Quality Control
Assays for the delineation and exploration drilling were completed at LabExpert in Rouyn-Noranda, Quebec. The Corporation
inserts at regular intervals quality control (QC) samples (blanks and reference materials) to monitor laboratory performance.
Cross check assays are done on a regular basis in a second accredited laboratory. The Quality Assurance / Quality Control
procedures are more completely described in the Technical Report filed on SEDAR by Richmont Mines, July 13, 2017.
Upcoming Catalysts and News Flow
• Q2 2019 – Young-Davidson and Island Gold Site Tours
• Mid-2019 – Lynn Lake Optimization Study
• H2 2019 – La Yaqui Grande EIA Approval
• H2 2019 – Cerro Pelon Construction Update
• H2 2019 – Kirazlı Construction Update
• H2 2019 – Island Gold Phase II Expansion Permit
About Alamos
Alamos is a Canadian-based intermediate gold producer with diversified production from four operating mines in North America.
This includes the Young-Davidson and Island Gold mines in northern Ontario, Canada and the Mulatos and El Chanate mines
in Sonora State, Mexico. Additionally, the Company has a significant portfolio of development stage projects in Canada,
Mexico, Turkey, and the United States. Alamos employs more than 1,700 people and is committed to the highest standards
of sustainable development. The Company’s shares are traded on the TSX and NYSE under the symbol “AGI”.
FOR FURTHER INFORMATION, PLEASE CONTACT:
Scott K. Parsons
Vice President, Investor Relations
(416) 368-9932 x 5439
All amounts are in United States dollars, unless otherwise stated.
The TSX and NYSE have not reviewed and do not accept responsibility for the adequacy or accuracy of this release.
Cautionary Note
This news release includes certain statements that constitute forward-looking information within the meaning of applicable
Canadian and U.S. securities laws ("forward-looking statements"). All statements in this news release, other than statements
of historical fact, which address events, results, outcomes or developments that Alamos expects to occur are forward-looking
statements. Forward-looking statements are generally, but not always, identified by the use of forward-looking terminology
such as "expects", “believe", "anticipate", "plan",, “forecast”, "estimate", "intend", “budget” or “potential” or variations of such
words and phrases and similar expressions or statements that certain actions, events or results "may", "could", "would",
"might" or "will" be taken, occur or be achieved or the negative connotation of such terms. Forward-looking statements in this
news release include the statements with respect to planned exploration programs, costs and expenditures, changes in
Mineral Resources and conversion of Mineral Resources to Proven and Probable Mineral Reserves, and other information that
is based on forecasts and projections of future operational, geological or financial results, estimates of amounts not yet
determinable and assumptions of management.
Exploration results that include geophysics, sampling, and drill results on wide spacings may not be indicative of the
occurrence of a mineral deposit. Such results do not provide assurance that further work will establish sufficient grade,
continuity, metallurgical characteristics and economic potential to be classed as a category of Mineral Resource. A Mineral
Resource that is classified as "Inferred" or "Indicated" has a great amount of uncertainty as to its existence and economic and
legal feasibility. It cannot be assumed that any or part of an "Indicated Mineral Resource" or "Inferred Mineral Resource" will
ever be upgraded to a higher category of Mineral Resource. Investors are cautioned not to assume that all or any part of
mineral deposits in these categories will ever be converted into Proven and Probable Mineral Reserves.
Alamos cautions readers not to place undue reliance on the forward-looking statements which are not guarantees of future
events as a number of factors could cause results, conditions, actions or events to differ materially from the targets, outlooks,
expectations, goals, estimates or intentions expressed in the forward-looking statements. These factors include, but are not
limited to: risks related to obtaining and maintaining necessary permits, licenses and authorizations required to carry out
planned exploration or development work, the actual results of current exploration activities, conclusions of economic and
geological evaluations, changes in project parameters as plans continue to be refined, employee and community relations,the
speculative nature of mineral exploration and development, contests over title to properties, changes in national and local
government legislation, control and regulations and and fluctuations of the price of gold and foreign exchange rates as well as
those factors discussed in the section entitled "Risk Factors" in Alamos' latest Annual Information Form and MD&A, each
under the heading “Risk Factors”, available on the SEDAR website at www.sedar.com or on EDGAR at www.sec.gov. The
foregoing should be reviewed in conjunction with the information found in this news release. The Company disclaims any
intention or obligation to update or revise any forward-looking statement, whether written or oral, or whether as a result of new
information, future events or otherwise, except as required by applicable law.
All of the forward-looking statements made in this news release are qualified by these cautionary statements.
Cautionary Note to U.S. Investors – Mineral Reserve and Resource Estimates
All Mineral Resource and Reserve estimates included in this news release or documents referenced in this news release have
been prepared in accordance with Canadian National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-
101") and the Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM") - CIM Definition Standards on Mineral
Resources and Mineral Reserves, adopted by the CIM Council, as amended (the "CIM Standards"). NI 43-101 is a rule
developed by the Canadian Securities Administrators, which established standards for all public disclosure an issuer makes of
scientific and technical information concerning mineral projects. The terms "Mineral Reserve", "Proven Mineral Reserve" and
"Probable Mineral Reserve" are Canadian mining terms as defined in accordance with NI 43-101 and the CIM Standards.
These definitions differ materially from the definitions in the Securities Exchange Commission (the “SEC”) Industry Guide 7
("SEC Industry Guide 7") under the United States Securities Act of 1933, as amended, and the Exchange Act. Under SEC
Industry Guide 7 standards, a "final" or "bankable" feasibility study is required to report reserves, the three-year historical
average price is used in any reserve or cash flow analysis to designate reserves and the primary environmental analysis or
report must be filed with the appropriate governmental authority.
In addition, the terms "Mineral Resource", "Measured Mineral Resource", "Indicated Mineral Resource" and "Inferred Mineral
Resource" are defined in and required to be disclosed by NI 43-101 and the CIM Standards; however, these terms are not
defined terms under SEC Industry Guide 7 and are normally not permitted to be used in reports and registration statements
filed with the U.S. SEC. Investors are cautioned not to assume that all or any part of mineral deposits in these categories will
ever be converted into Mineral Reserves. "Inferred Mineral Resources" have a great amount of uncertainty as to their existence,
and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an Inferred Mineral
Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of Inferred Mineral Resources may not
form the basis of feasibility or pre-feasibility studies, except in very limited circumstances. Investors are cautioned not to
assume that all or any part of an Inferred Mineral Resource exists or is economically or legally mineable. Disclosure of
"contained ounces" in a Mineral Resource is permitted disclosure under Canadian regulations; however, the SEC normally
only permits issuers to report mineralization that does not constitute "reserves" by SEC standards as in place tonnage and
grade without reference to unit measures.
Table 1: Island Gold – Previously Unreleased Select Composite Intervals from Surface Exploration Drilling
Composite intervals greater than 3 g/t Au weighted average, capping values:
Main Island and Extension 1 areas @ 225 g/t Au; Extension 2 Area @ 160 g/t Au
Hole ID Zone Target Area From
(m) To (m)
Core
Length
(m)
True
Width
(m)
Au
Uncut
(g/t)
Au Cut
(g/t)
Vertical
Depth
(m)
MH12-5 E1E Main Ext 1517.40 1523.40 6.00 4.96 30.01 15.13 1367
MH13-4 E1E Main Ext 1515.10 1517.70 2.60 2.55 9.89 9.89 1300
MH13-5 E1E Main Ext 1518.50 1523.60 5.10 5.10 71.17 24.53 1277
MH14-6 E1E Main Ext 1520.20 1532.80 12.60 10.52 3.85 3.85 1380
MH17-03 E1E Main Ext 1545.90 1549.00 3.10 2.81 17.52 16.97 1313
MH17-04 E1E Main Ext 1569.10 1575.40 6.30 5.15 40.75 34.01 1384
MH17-05 G Main Ext 1492.60 1495.60 3.00 2.90 7.58 7.58 1288
MH18-01 E1E Eastern Ext 1086.20 1090.70 4.50 3.65 6.03 6.03 956
MH18-02 E1E Eastern Ext 1127.50 1140.90 13.40 10.24 4.45 4.45 1025
MH18-03 E1E Eastern Ext 1107.70 1113.80 6.10 4.67 46.11 25.81 991
AR-415-04 C Western Ext 833.70 838.30 4.60 3.31 9.31 9.31 689
MH16-03 G1 Western Ext 1398.10 1404.00 5.90 4.44 16.22 16.22 1252
MH16-04 G Western Ext 1478.99 1484.34 5.35 4.40 7.28 7.28 1338
MH16-04 C Western Ext 1498.50 1504.90 6.40 5.28 5.14 5.14 1355
MH16-05 C Western Ext 1458.10 1461.25 3.15 2.62 4.07 4.07 1294
MH13-3 Unknown Main Ext 1592.50 1593.20 0.70 25.69 25.69 1413
MH17-03 Unknown Main Ext 1624.00 1629.50 5.50 3.40 3.40 1377
MH17-03 Unknown Main Ext 1653.00 1655.40 2.40 27.07 27.07 1400
MH17-04 Unknown Main Ext 1595.20 1598.00 2.80 29.13 29.13 1406
MH16-01 Unknown Western Ext 1175.00 1179.50 4.50 5.89 5.89 1036
MH16-02 Unknown Western Ext 1221.50 1224.60 3.10 9.55 9.55 1082
MH16-02 Unknown Western Ext 1299.00 1300.70 1.70 12.46 12.46 1142
Note: Unknown zone corresponds to gold intercepts outside known ore zones and for which continuity is not yet established
and therefore true width has not been calculated.
Table 2: Island Gold – Previously Unreleased Select Composite Intervals from Underground Exploration Drilling
Composite intervals greater than 3 g/t Au weighted average, capping values:
Main Island and Extension 1 areas @ 225 g/t Au; Extension 2 Area @ 160 g/t Au
Hole ID Zone Target Area From
(m) To (m)
Core
Length
(m)
True
Width
(m)
Au
Uncut
(g/t)
Au Cut
(g/t)
Vertical
Depth
(m)
450-467-85 C Western Ext 199.80 203.85 4.05 3.22 31.62 31.62 503
450-467-86 C Western Ext 188.00 192.00 4.00 3.34 10.43 10.43 485
840-548-06 E1E Main Ext 178.20 181.60 3.40 2.69 3.42 3.42 902
840-548-10 E1E Main Ext 159.80 164.80 5.00 4.57 12.91 12.91 871
840-548-11 E1E Main Ext 265.90 270.55 4.65 2.75 38.42 23.78 1030
840-548-16 E1E Main Ext 244.00 246.70 2.70 2.02 8.73 8.73 1004
840-548-20 E1E Main Ext 149.00 151.30 2.30 2.08 3.67 3.67 851
840-548-01 Unknown Main Ext 81.80 84.40 2.60 12.38 12.38 899
Note: Unknown zone corresponds to gold intercepts outside known ore zones and for which continuity is not yet established
and therefore true width has not been calculated.
Table 3: Island Gold – Previously Unreleased Select Composite Intervals from Underground Delineation Drilling
Composite intervals greater than 3 g/t Au weighted average, capping values:
Main Island and Extension 1 areas @ 225 g/t Au; Extension 2 Area @ 160 g/t Au
Hole ID Zone Target Area From
(m) To (m)
Core
Length
(m)
True
Width
(m)
Au Uncut
(g/t)
Au Cut
(g/t)
Vertical
Depth
(m)
840-542-60 E1E Main Ext 303.92 315.00 11.08 4.56 22.57 18.74 1080
840-542-61 E1E Main Ext 301.00 314.20 13.20 6.38 13.00 9.60 1085
840-542-63 E1E Main Ext 285.00 300.50 15.50 7.92 4.88 4.88 1066
840-548-02 E1E Main Ext 233.80 238.30 4.50 3.09 11.31 11.31 986
840-548-03 E1E Main Ext 225.60 230.20 4.60 3.31 35.61 29.75 973
840-548-04 E1E Main Ext 209.00 212.30 3.30 2.40 7.32 7.32 946
840-548-05 E1E Main Ext 195.00 200.80 5.80 4.55 22.44 22.44 925
840-548-13 E1E Main Ext 214.00 218.65 4.65 3.28 8.67 8.67 954
840-548-14 E1E Main Ext 198.12 205.83 7.71 5.35 13.38 13.38 933
840-548-17 E1E Main Ext 234.70 237.70 3.00 2.10 8.30 8.30 979
840-548-18 E1E Main Ext 222.25 227.50 5.25 3.60 38.99 24.86 957
450-467-87 C Western Ext 188.55 192.50 3.95 3.29 3.44 3.44 505
580-473-07 C Western Ext 68.70 71.45 2.75 2.21 37.59 37.59 539
580-473-13 C Western Ext 58.60 61.00 2.40 2.18 16.11 16.11 546
450-467-64 D1 Western Ext 209.15 211.93 2.78 1.79 5.45 5.45 569
840-548-04 Unknown Main Ext 94.50 97.50 3.00 6.76 6.76 891
840-548-14 Unknown Main Ext 100.44 102.94 2.50 17.56 17.56 890
450-467-87 Unknown Western Ext 202.00 204.42 2.42 10.02 10.02 508
Note: Unknown zone corresponds to gold intercepts outside known ore zones and for which continuity is not yet established
and therefore true width has not been calculated.
Table 4: Surface exploration drill holes; azimuth, dip, drilled length, and collar location at surface (UTM NAD83)
Hole ID Azimuth
(°)
Dip
(°)
Drilled
Length
(m)
UTM
Easting
UTM
Northing
UTM
Elevation
(m)
Comments
AR-415-01 5 -69 1100 689995 5350898 386
AR-415-02 337 -66 1046 689995 5350898 386
AR-415-03 319 -70 1142 689994 5350897 385
AR-415-04 356 -60 1127 689995 5350898 386
MH12-4 337 -70 888 691310 5350975 394 Cut from MH12-3 at 968m
MH12-5 337 -70 579 691310 5350975 394 Cut from MH12-4 at 1070m
MH12-6 337 -70 837 691522 5351123 394 Cut from MH12-5 at 1025m
MH13-3 337 -72 688 692074 5351046 389 Cut from MH13-1 at 1051m
MH13-4 337 -72 685 692074 5351046 389 Cut from MH13-1 at 979m
MH13-5 336 -72 688 692074 5351046 389 Cut from MH13-4 at 961m
MH14-3 338 -85 932 691522 5351123 394 Cut from MH14-1 at 852m
MH14-4 228 -85 808 691522 5351123 394 Cut from MH14-3 at 880m
MH14-6 3 -68 1422 691522 5351123 394 Cut from MH14 at 209m
MH16-01 337 -73 1584 691002 5350845 387
MH16-02 337 -73 656 691002 5350845 387 Cut from MH16-01 at 936m
MH16-03 337 -73 579 691002 5350845 387 Cut from MH16-02 at 980m
MH16-04 337 -73 827 691002 5350845 387 Cut from MH16-03 at 828m
MH16-05 337 -73 1087 691002 5350845 387 Cut from MH16-01 at 517m
MH17-03 334 -73 924 692320 5351076 395 Cut from MH17-02 at 884m
MH17-04 334 -73 767 692320 5351076 395 Cut from MH17-03 at 959m
MH17-05 334 -73 966 692320 5351076 395 Cut from MH17-01 at 839m
MH18-01 339 -75 1259 691886 5351456 400
MH18-02 339 -75 741 691886 5351456 400 Cut from MH18-01 at 666m
MH18-03 339 -75 732 691886 5351456 400 Cut from MH18-02 at 539m
Note: UTM mine surface elevation 382 m
Table 5: Underground drill holes; azimuth, dip, drilled length, and collar location (UTM NAD83)
Hole ID Azimuth
(°)
Dip
(°)
Drilled
Length (m)
UTM
Easting
UTM
Northing
UTM
Elevation (m)
450-467-59 148 -27 255 690222 5351667 -70
450-467-64 144 -36 306 690224 5351667 -70
450-467-84 200 -21 249 690221 5351667 -70
450-467-85 200 -16 241 690221 5351667 -70
450-467-86 198 -11 222 690222 5351667 -70
450-467-87 195 -18 228 690222 5351667 -70
450-467-88 192 -21 263 690222 5351667 -70
450-467-90 194 -2 207 690222 5351667 -69
580-473-04 210 11 90 690327 5351562 -202
580-473-07 206 38 87 690327 5351562 -200
580-473-13 188 37 72 690328 5351562 -200
620-543-72 158 11 156 690967 5351872 -226
635-521-05 144 8 90 690801 5351699 -267
635-521-06 143 28 90 690801 5351699 -266
635-521-07 137 45 96 690801 5351699 -265
840-542-51 171 -34 246 690972 5351831 -466
840-542-59 166 -47 318 690972 5351831 -466
840-542-60 152 -47 330 690972 5351831 -466
840-542-61 173 -49 369 690972 5351831 -466
840-542-62 149 -50 375 690972 5351831 -466
840-542-63 172 -48 360 690972 5351831 -466
840-548-01 162 -39 282 691029 5351853 -464
840-548-02 162 -36 270 691029 5351853 -464
840-548-03 162 -34 252 691029 5351853 -464
840-548-04 164 -28 240 691029 5351853 -464
840-548-05 162 -24 225 691029 5351853 -464
840-548-06 162 -18 210 691029 5351853 -464
840-548-09 160 -47 345 691029 5351853 -464
840-548-10 160 -9 189 691029 5351853 -464
840-548-11 157 -43 312 691029 5351853 -464
840-548-13 157 -32 234 691029 5351853 -464
840-548-14 156 -27 234 691029 5351853 -464
840-548-15 157 7 180 691029 5351853 -464
840-548-16 151 -38 282 691029 5351853 -464
840-548-17 151 -34 270 691029 5351853 -464
840-548-18 151 -30 252 691029 5351853 -464
840-548-20 149 -2 192 691029 5351853 -464
840-548-21 149 21 210 691029 5351853 -464
Note: UTM mine surface elevation 382 m
Figures accompanying this announcement are available at
http://www.globenewswire.com/NewsRoom/AttachmentNg/0100417f-f958-43c1-ae49-ab26eb0043e3
http://www.globenewswire.com/NewsRoom/AttachmentNg/5fe9df96-1b1e-4bad-81f6-c8405556b7db
http://www.globenewswire.com/NewsRoom/AttachmentNg/5253321e-383d-4374-b7be-e25f06936ee6
http://www.globenewswire.com/NewsRoom/AttachmentNg/007caf35-943a-446d-99fa-df915d31ddcb