Alamos Gold Further Extends High-Grade Mineralization at Island Gold
Alamos Gold Further Extends High-Grade Mineralization at Island Gold
Exploration Success from 2019 Program Expected to Drive Strong Growth in Mineral Resources
TORONTO, Jan. 15, 2020 -- Alamos Gold Inc. ( TSX:AGI; NYSE:AGI) (“Alamos” or the “Company”) today reported new
results from surface and underground exploration drilling at the Island Gold mine, further extending high-grade gold
mineralization beyond existing Mineral Resources in all three areas of focus. All reported drill widths are true width of the
mineralized zones, unless otherwise stated.
• Main Extension Down-Plunge: high-grade mineralization extended 80 metres (“m”) east of existing Mineral
Resources (MH17-12) and 50 m below the nearest previously reported intersection (MH17-07). High-grade
mineralization has been extended over 1,000 m east of current mine workings and remains open along strike to the
east, and both up- and down-plunge. New highlights include:
• 121.32 g/t Au (96.47 g/t cut) over 3.81 m (MH20-01);
• 108.17 g/t Au (94.56 g/t cut) over 2.57 m (MH17-11); and
• 36.45 g/t Au (13.23 g/t cut) over 8.04 m (MH17-12).
• Eastern Extension: high-grade mineralization intersected 170 m east of the nearest Indicated Mineral
Resource (620-610-07). This area is located 225 m above the high-grade intersections in the new area of
focus. New highlights include:
• 32.19 g/t Au (25.48 g/t cut) over 4.68 m (620-610-01); and
• 20.18 g/t Au (20.18 g/t cut) over 3.24 m (620-610-07).
• Gap between Main and Eastern Extensions: extended high-grade mineralization 50 m to the west in the new
area of focus to now cover a lateral extent of 350 m, and confirmed the continuity of high-grade
mineralization at a drill density that will support the declaration of an initial Inferred Mineral Resource. All
17 holes drilled to date in this area have intersected the E1E Zone including 12 intersecting ore grade gold
mineralization. This has confirmed the E1E Zone extends vertically over 1.2 kilometres (“km”), between a depth of 300
m and 1,500 m in the eastern part of the deposit. New highlights include:
• 21.28 g/t Au (21.28 g/t cut) over 9.01 m (MH18-09); and
• 28.50 g/t Au (23.13 g/t cut) over 4.38 m (MH18-10).
Note: Drillhole composite intervals reported as “cut” may include higher grade samples which have been cut to 225 g/t Au for
Main and Extension 1 areas, and 160 g/t Au for Extension 2 Area.
“We had another exceptional year at Island Gold operationally, financially and through the drill bit. The operation produced
150,400 ounces of gold in 2019, achieving a new record for the fifth consecutive year, and set a new record for free cash flow.
With the ongoing exploration success, we expect further growth in Island Gold’s Mineral Reserves and Resources with our
year-end update. This growth will be incorporated into the Phase III expansion study which we plan to complete during the
second quarter of 2020. We expect this study will showcase a larger, extremely profitable, long-life operation,” said John A.
McCluskey, President and Chief Executive Officer.
2019 Exploration Drilling Program – Island Gold Mine
The 2019 exploration drilling program was focused on further expanding the down-plunge and lateral extensions of the Island
Gold deposit with the objective of adding new near mine Mineral Resources across the two-kilometre long Island Gold Main
Zone (Figure 1).
The program has been successful in extending high-grade gold mineralization across all three areas of focus, the Main,
Western, and Eastern Extensions. This is expected to drive further growth in Mineral Reserves and Resources in the 2019
year-end update to be completed in February 2020. This is a continuation of the significant growth in Mineral Reserves and
Resources already realized since the November 2017 acquisition of Island Gold.
A total of 47,608 m of surface directional and 24,462 m of underground exploration drilling was completed in 2019. New
highlight intercepts since August 31, 2019 can be found in Figures 1, 2, 3, and 4; and Tables 1 and 2 at the end of this news
release.
2020 Exploration Drilling Program – Island Gold Mine
A total of $21 million has been budgeted in 2020 for surface and underground exploration at Island Gold, an increase from the
2019 budget of $19 million. The focus remains on continuing to define new near mine Mineral Resources. The 2020 budget
includes 46,000 m of surface directional drilling, 30,000 m of underground exploration drilling, and 900 m of underground
exploration development to extend drill platforms on the 340, 620, 790, and 840 levels.
A regional exploration program which includes 10,000 m of drilling is also planned in 2020, focused on evaluating and
advancing exploration targets outside the main Island Gold Mine area on the 9,750-hectare Island Gold Property.
Main Extension
Surface directional drilling continues to extend gold mineralization with drill hole spacing ranging from 50 to 100 m (Figure 2).
New highlights from the surface drilling program include (E1E-Zone) (Table 1):
• 121.32 g/t Au (96.47 g/t cut) over 3.81 m (MH20-01);
• 108.17 g/t Au (94.56 g/t cut) over 2.57 m (MH17-11);
• 36.45 g/t Au (13.23 g/t cut) over 8.04 m (MH17-12);
• 9.96 g/t Au (9.96 g/t cut) over 7.79 m (MH21-02);
• 12.56 g/t Au (10.16 g/t cut) over 6.85 m (MH14-8);
• 10.69 g/t Au (10.69 g/t cut) over 6.08 m (MH20-02);
• 8.27 g/t Au (8.27 g/t cut) over 7.16 m (MH21-03); and
• 9.95 g/t Au (9.95 g/t cut) over 3.60 m (MH20-03).
Gold mineralization continues to be expanded above, below and east as far as 200 m from existing Inferred Mineral
Resources, and over one kilometre from existing mine workings. This includes new drillholes MH17-12 (36.45 g/t Au (13.23 g/t
cut) over 8.04 m) and MH17-11 (108.17 g/t Au (94.56 g/t cut) over 2.57 m) which extended high-grade gold mineralization 80
m east of existing Mineral Resources and 50 m below the previously reported drill hole MH17-07 (16.61 g/t Au (14.48 g/t cut)
over 7.27 m).
Drillhole MH20-02 (10.69 g/t Au (10.69 g/t cut) over 6.08 m) extended high-grade mineralization 145 m above and east of the
nearest Inferred Mineral Resources. Drillhole MH21-03 (8.27 g/t Au (8.27 g/t cut) over 7.16 m) also expanded high-grade
mineralization 120 m above existing Mineral Resources. Importantly, this also closed the gap to within 145 m of the nearest
intercept in the new area of focus (new drillhole MH18-09 (21.28 g/t Au (21.28 g/t cut) over 9.01 m) ). This east plunging high-
grade ore shoot remains open laterally, and up- and down-plunge.
Underground exploration drilling is being conducted from the 620 and 840 level exploration drifts in the Main Extension area to
test the continuity of known Mineral Resource and Reserve blocks.
New highlights from the underground exploration drilling program in the E1E Zone include (Figure 3, Table 2):
• 8.98 g/t Au (8.98 g/t cut) over 7.65 m (840-560-04);
• 8.64 g/t Au (8.64 g/t cut) over 6.38 m (840-560-09);
• 9.48 g/t Au (9.48 g/t cut) over 4.36 m (840-554-04); and
• 11.66 g/t Au (11.66 g/t cut) over 2.76 m (840-560-11).
Three surface and two underground diamond drill rigs remain active in the Main Extension target area, focused on further
extending high-grade mineralization and defining additional Mineral Resources.
Drilling completed in 2019 in the eastern part of the Island Gold mine (Main Extension area, new area of focus and Eastern
Extension area) has confirmed the continuity of the E1E gold zone at depth. This zone now extends from 300 m to a vertical
depth of more than 1,500 m.
Eastern Extension
Underground exploration drilling is being conducted from the 340 and 620 level exploration drifts. Drilling from the two levels is
testing an area to the east of the Mineral Reserve and Mineral Resource blocks in the Eastern Extension, between 300 m and
1,100 m vertical depths, and above Inferred Mineral Resources in the Main Extension.
New highlights from the underground exploration drilling program in the E1E Zone include (Figure 3, Table 2):
• 32.19 g/t Au (25.48 g/t cut) over 4.68 m (620-610-01);
• 20.18 g/t Au (20.18 g/t cut) over 3.24 m (620-610-07);
• 11.90 g/t Au (11.90 g/t cut) over 4.03 m (620-604-17);
• 10.26 g/t (10.26 g/t cut) over 3.28 m (620-610-06); and
• 75.79 g/t Au (12.06 g/t cut) over 2.62 m (620-604-16).
New drillholes 620-610-01 (32.19 g/t Au (25.48 g/t cut) over 4.68 m) and 620-610-07 (20.18 g/t Au (20.18 g/t cut) over 3.24
m) intersected high-grade mineralization 100 m and 170 m, respectively, east of existing Indicated and Inferred Mineral
Resources in the Eastern Extension. Two underground rigs remain active in the area focused on defining new near mine
Mineral Resources.
New Area of Focus between the Eastern and Main Extensions
Surface directional drilling remains focused on testing the new area of high-grade gold mineralization within the E1E Zone
discovered in May 2019. This area is located between 850 m and 1,150 m vertical depths, 180 m down-plunge from known
Inferred Mineral Resource blocks in the Eastern Extension, and 200 m vertically above Inferred Mineral Resources in the
eastern down-plunge extent of the Main Extension (Figure 2). New highlights from the surface drilling program include (E1E-
Zone) (Table 1):
• 21.28 g/t Au (21.28 g/t cut) over 9.01 m (MH18-09);
• 28.50 g/t Au (23.13 g/t cut) over 4.38 m (MH18-10); and
• 9.32 g/t Au (9.32 g/t cut) over 3.81 m (MH19-04).
All 17 holes drilled to date in this area have intersected the E1E Zone with 12 of the holes presenting ore grade
gold mineralization (see Figure 4).
New drill holes MH18-10 (28.50 g/t Au (23.13 g/t cut) over 4.38 m) and MH18-09 (21.28 g/t Au (21.28 g/t cut) over 9.01 m)
have confirmed the continuity of high-grade mineralization at a drill density which will support the declaration of an initial
Inferred Mineral Resource in this new area with the year-end update. Additionally, drill hole MH19-04 ( 9.32 g/t Au (9.32 g/t
cut) over 3.81 m) extended high-grade mineralization 50 m to the west to now cover a lateral extent of 350 m.
Testing the extent and continuity of high-grade mineralization between the Eastern and Main Extensions will be an ongoing
focus of the exploration drilling program in 2020. Two surface directional diamond drill rigs are active in this area and will
continue with 75 to 100 m spaced step-out drilling. The 840 level exploration drift has been extended above the western extent
of this area. This will provide underground access for infill drilling in 2020 and exploration drilling for extending high-grade
mineralization.
Other Zones
The Island Gold Deposit consists of a number of subparallel mineralized zones, with the majority of Mineral Reserves and
Resources being defined in the C Zone and E1E Zone which constitute the main production horizons at the Island Gold mine.
Highlights of new intersections from underground exploration drilling of parallel zones and zones in which the lateral continuity
is not yet established (“Unknown Zone”) include (reported composite intervals are core lengths) (Table 2):
• 22.26 g/t Au (18.98 g/t cut) over 7.58 m (840-554-03);
• 14.27 g/t Au (14.27 g/t cut) over 9.50 m (840-560-08);
• 16.66 g/t Au (16.66 g/t cut) over 3.50 m (340-602-24);
• 4.99 g/t Au (4.99 g/t cut) over 10.80 m (620-610-04);
• 5.75 g/t Au (5.75 g/t cut) over 8.00 m (840-554-01);
• 3.83 g/t Au (3.83 g/t cut) over 11.94 m (840-560-06);
• 10.42 g/t Au (10.42 g/t cut) over 4.30 m (840-560-02); and
• 4.16 g/t Au (4.16 g/t cut) over 7.63 m (340-602-37).
Qualified Persons
Chris Bostwick, FAusIMM, Alamos Gold’s Vice President, Technical Services, has reviewed and approved the scientific and
technical information contained in this news release. Chris Bostwick is a Qualified Person within the meaning of Canadian
Securities Administrator’s National Instrument 43-101 (“NI 43-101”).
Exploration programs at the Island Gold Mine are directed by Raynald Vincent, P.Eng., M.G.P., Chief Geologist at the Island
Gold Mine and a Qualified Person within the meaning of NI 43-101.
Quality Control
Assays for the surface exploration drilling program were completed at LabExpert in Rouyn-Noranda, Quebec. The Corporation
inserts at regular intervals quality control (QC) samples (blanks and reference materials) to monitor laboratory performance.
Cross check assays are done on a regular basis in a second accredited laboratory. The Quality Assurance / Quality Control
procedures are more completely described in the Technical Report filed on SEDAR by Richmont Mines, July 13, 2017.
About Alamos
Alamos is a Canadian-based intermediate gold producer with diversified production from three operating mines in North
America. This includes the Young-Davidson and Island Gold mines in northern Ontario, Canada and the Mulatos mine in
Sonora State, Mexico. Additionally, the Company has a significant portfolio of development stage projects in Canada, Mexico,
Turkey, and the United States. Alamos employs more than 1,700 people and is committed to the highest standards of
sustainable development. The Company’s shares are traded on the TSX and NYSE under the symbol “AGI”.
FOR FURTHER INFORMATION, PLEASE CONTACT:
Scott K. Parsons
Vice President, Investor Relations
(416) 368-9932 x 5439
All amounts are in United States dollars, unless otherwise stated.
The TSX and NYSE have not reviewed and do not accept responsibility for the adequacy or accuracy of this release.
Cautionary Note
This news release includes certain statements that constitute forward-looking information within the meaning of applicable
Canadian and U.S. securities laws ("forward-looking statements"). All statements in this news release, other than statements
of historical fact, which address events, results, outcomes or developments that Alamos expects to occur are forward-looking
statements. Forward-looking statements are generally, but not always, identified by the use of forward-looking terminology
such as “continue”, "expect", “believe", "anticipate", "plan", “forecast”, "estimate", "intend", “budget” or “potential” or variations
of such words and phrases and similar expressions or statements that certain actions, events or results "may", "could",
"would", "might" or "will" be taken, occur or be achieved or the negative connotation of such terms. Forward-looking
statements in this news release include statements with respect to planned exploration programs, the estimation of Mineral
Resources, exploration results, potential mineralization, changes in Mineral Resources and Proven and Probable Mineral
Reserves,and other information that is based on forecasts and projections of future operational, geological or financial results,
estimates of amounts not yet determinable and assumptions of management.
Exploration results that include geophysics, sampling, and drill results on wide spacings may not be indicative of the
occurrence of a mineral deposit. Such results do not provide assurance that further work will establish sufficient grade,
continuity, metallurgical characteristics and economic potential to be classed as a category of Mineral Resource. A Mineral
Resource that is classified as "Inferred" or "Indicated" has a great amount of uncertainty as to its existence and economic and
legal feasibility. It cannot be assumed that any or part of an "Indicated Mineral Resource" or "Inferred Mineral Resource" will
ever be upgraded to a higher category of Mineral Resource. Investors are cautioned not to assume that all or any part of
mineral deposits in these categories will ever be converted into Proven and Probable Mineral Reserves.
Alamos cautions readers not to place undue reliance on the forward-looking statements which are not guarantees of future
events as a number of factors could cause results, conditions, actions or events to differ materially from the targets, outlooks,
expectations, goals, estimates or intentions expressed in the forward-looking statements. These factors include, but are not
limited to: risks related to obtaining and maintaining necessary permits, licenses and authorizations required to carry out
planned exploration or development work, the actual results of current exploration activities, conclusions of economic and
geological evaluations, changes in project parameters as plans continue to be refined, employee and community relations,the
speculative nature of mineral exploration and development, contests over title to properties, changes in national and local
government legislation, control and regulations and and fluctuations of the price of gold and foreign exchange rates as well as
those factors discussed in the section entitled "Risk Factors" in Alamos' latest Annual Information Form and MD&A, each
under the heading “Risk Factors”, available on the SEDAR website at www.sedar.com or on EDGAR at www.sec.gov. The
foregoing should be reviewed in conjunction with the information found in this news release. The Company disclaims any
intention or obligation to update or revise any forward-looking statement, whether written or oral, or whether as a result of new
information, future events or otherwise, except as required by applicable law.
All of the forward-looking statements made in this news release are qualified by these cautionary statements.
Cautionary Note to U.S. Investors – Mineral Reserve and Resource Estimates
All Mineral Resource and Reserve estimates included in this news release or documents referenced in this news release have
been prepared in accordance with Canadian National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-
101") and the Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM") - CIM Definition Standards on Mineral
Resources and Mineral Reserves, adopted by the CIM Council, as amended (the "CIM Standards"). NI 43-101 is a rule
developed by the Canadian Securities Administrators, which established standards for all public disclosure an issuer makes of
scientific and technical information concerning mineral projects. The terms "Mineral Reserve", "Proven Mineral Reserve" and
"Probable Mineral Reserve" are Canadian mining terms as defined in accordance with NI 43-101 and the CIM Standards.
These definitions differ materially from the definitions in the Securities Exchange Commission (the “SEC”) Industry Guide 7
("SEC Industry Guide 7") under the United States Securities Act of 1933, as amended, and the Exchange Act . Under SEC
Industry Guide 7 standards, a "final" or "bankable" feasibility study is required to report reserves, the three-year historical
average price is used in any reserve or cash flow analysis to designate reserves and the primary environmental analysis or
report must be filed with the appropriate governmental authority.
In addition, the terms "Mineral Resource", "Measured Mineral Resource", "Indicated Mineral Resource" and "Inferred Mineral
Resource" are defined in and required to be disclosed by NI 43-101 and the CIM Standards; however, these terms are not
defined terms under SEC Industry Guide 7 and are normally not permitted to be used in reports and registration statements
filed with the SEC. Investors are cautioned not to assume that all or any part of mineral deposits in these categories will ever
be converted into Mineral Reserves. "Inferred Mineral Resources" have a great amount of uncertainty as to their existence, and
great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an Inferred Mineral
Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of Inferred Mineral Resources may not
form the basis of feasibility or pre-feasibility studies, except in very limited circumstances. Investors are cautioned not to
assume that all or any part of an Inferred Mineral Resource exists or is economically or legally mineable. Disclosure of
"contained ounces" in a Mineral Resource is permitted disclosure under Canadian regulations; however, the SEC normally
only permits issuers to report mineralization that does not constitute "reserves" by SEC standards as in place tonnage and
grade without reference to unit measures.
Table 1: Island Gold – Previously Unreleased Select Composite Intervals from Surface Exploration Drilling
Composite intervals greater than 3 g/t Au weighted average, capping values:
Western and Main Extension areas @ 225 g/t Au; Eastern Extension area @ 160 g/t Au.
Hole ID Zone Target
Area
From
(m) To (m)
Core
Length
(m)
True
Width
(m)
Au
Uncut
(g/t)
Au Cut
(g/t)
Vertical
Depth (m)
MH16-08 C Western
Ext 1395.00 1400.00 5.00 4.82 5.37 5.37 1160
MH16-09 C Western
Ext 1471.90 1475.47 3.57 3.06 5.01 5.01 1307
MH22-01 C Main Ext 1452.80 1455.75 2.95 2.52 7.08 7.08 1276
MH14-8 D Main Ext 1613.70 1616.60 2.90 2.39 8.98 8.98 1527
MH17-12 D1 Main Ext 1532.00 1535.00 3.00 2.77 7.38 7.38 1313
MH21-02 D1 Main Ext 1387.10 1390.40 3.30 2.89 15.54 14.27 1254
MH14-8 E1E Main Ext 1547.40 1555.30 7.90 6.85 12.56 10.16 1468
MH17-08A E1E Main Ext 1510.00 1512.40 2.40 2.39 4.45 4.45 1172
MH17-11 E1E Main Ext 1542.90 1545.60 2.70 2.57 108.17 94.56 1290
MH17-12 E1E Main Ext 1514.80 1523.50 8.70 8.04 36.45 13.23 1301
MH18-08 E1E Eastern Ext 1163.00 1168.30 5.30 3.40 3.40 3.40 1076
MH18-09 E1E Eastern
Ext 1130.00 1142.00 12.00 9.01 21.28 21.28 1043
MH18-10 E1E Eastern
Ext 1172.10 1177.80 5.70 4.38 28.50 23.13 1070
MH19-04 E1E Eastern
Ext 1172.45 1176.75 4.30 3.81 9.32 9.32 1070
MH19-071 E1E Eastern Ext 1155.90 1161.40 5.50 3.65 4.75 4.75 1034
MH20-01 E1E Main Ext 1262.30 1266.90 4.60 3.81 121.32 96.47 1210
MH20-02 E1E Main Ext 1194.50 1202.00 7.50 6.08 10.69 10.69 1135
MH20-03 E1E Main Ext 1241.80 1246.70 4.90 3.60 9.95 9.95 1189
MH21-02 E1E Main Ext 1368.70 1377.60 8.90 7.79 9.96 9.96 1240
MH21-031 E1E Main Ext 1334.20 1342.40 8.20 7.16 8.27 8.27 1186
MH21-031 Unknown Main Ext 1319.80 1327.20 7.40 6.46 7.04 7.04 1173
1 Results not included in the year end 2019 Mineral Resource calculation
Table 2: Island Gold – Previously Unreleased Select Composite Intervals from Underground Exploration Drilling
Composite intervals greater than 3 g/t Au weighted average, capping values:
Western and Main Extension areas @ 225 g/t Au; Eastern Extension area @ 160 g/t Au.
Hole ID Zone Target
Area
From
(m) To (m)
Core
Length
(m)
True
Width
(m)
Au
Uncut
(g/t)
Au Cut
(g/t)
Vertical
Depth
(m)
340-602-27 E1E Eastern Ext 128.00 131.20 3.20 2.44 6.06 6.06 364
620-604-16 E1E
Eastern
Ext 303.00 313.10 10.10 2.62 75.79 12.06 794
620-604-17 E1E
Eastern
Ext 266.10 276.80 10.70 4.03 11.90 11.90 764
620-610-01 E1E
Eastern
Ext 272.65 282.80 10.15 4.68 32.19 25.48 765
620-610-05 E1E Eastern Ext 251.40 260.80 9.40 4.61 5.86 5.86 742
620-610-06 E1E
Eastern
Ext 213.05 219.80 6.75 3.28 10.26 10.26 702
620-610-07 E1E
Eastern
Ext 146.40 151.60 5.20 3.24 20.18 20.18 642
840-542-67 E1E Main Ext 263.80 269.60 5.80 3.34 4.71 4.71 1036
840-554-01 E1E Main Ext 155.80 159.40 3.60 3.06 3.89 3.89 861
840-554-03 E1E Main Ext 218.10 221.30 3.20 2.34 5.19 5.19 944
840-554-04 E1E Main Ext 241.00 246.50 5.50 4.36 9.48 9.48 988
840-554-05 E1E Main Ext 326.60 333.10 6.50 3.35 6.99 6.99 1090
840-554-06 E1E Main Ext 250.50 255.75 5.25 4.03 5.10 5.10 1003
840-560-04 E1E Main Ext 292.40 309.55 17.15 7.65 8.98 8.98 1052
840-560-05 E1E Main Ext 249.00 252.20 3.20 2.48 3.37 3.37 983
840-560-09 E1E Main Ext 298.70 313.50 14.80 6.38 8.64 8.64 1047
840-560-11 E1E Main Ext 245.30 249.00 3.70 2.76 11.66 11.66 975
340-602-24 Unknown Eastern Ext 63.50 67.00 3.50 16.66 16.66 336
340-602-26 Unknown Eastern Ext 62.65 66.60 3.95 3.41 3.41 325
340-602-37 Unknown Eastern Ext 109.85 117.48 7.63 4.16 4.16 394
620-610-04 Unknown Eastern Ext 228.50 239.30 10.80 4.99 4.99 753
840-554-01 Unknown Main Ext 59.00 67.00 8.00 5.75 5.75 852
840-554-03 Unknown Main Ext 141.92 149.50 7.58 22.26 18.98 910
840-560-02 Unknown Main Ext 90.00 94.30 4.30 10.42 10.42 871
840-560-06 Unknown Main Ext 112.46 124.40 11.94 3.83 3.83 864
840-560-08 Unknown Main Ext 95.50 105.00 9.50 14.27 14.27 887
Note: Unknown zone corresponds to gold intercepts outside known ore zones and for which continuity is not yet established
and therefore true width has not been calculated.
Table 3: Surface exploration drill holes; azimuth, dip, drilled length, and collar location at surface (UTM NAD83).
Hole ID Azimuth
(°)
Dip
(°)
Drilled
Length
(m)
UTM
Easting (m)
UTM
Northing (m)
UTM
Elevation
(m)
Comments
MH14-8 338 -85 1040 691522 5351123 394 Cut from MH14-6 at
606m
MH16-08 337 -73 806 691003 5350848 390 Cut from MH16-06 at
747m
MH16-09 337 -73 787 691003 5350848 390 Cut from MH16-08 at
834m
MH17-08A 334 -73 1163 692320 5351076 395 Cut from MH17-01 at
753m
MH17-09 334 -73 71 692320 5351076 395 Abandoned
MH17-10 334 -73 560 692320 5351076 395 Cut from MH17-08A at
1054m
MH17-11 334 -73 797 692320 5351076 395 Cut from MH17-08A at
864m
MH17-12 334 -73 851 692320 5351076 395 Cut from MH17-11 at
925m
MH18-08 339 -75 579 691892 5351446 395 Cut from MH18-07 at
713m
MH18-09 339 -75 685 691892 5351446 395 Cut from MH18-07 at
586m
MH18-10 339 -75 834 691892 5351446 395 Cut from MH18-05 at
493m
MH18-11 339 -75 790 691892 5351446 395 Cut from MH18-07 at
586 m
MH19-03 336 -79 626 691646 5351376 399 Cut from MH19-02 at
760m
MH19-04 336 -79 1027 691646 5351376 399 Cut from MH19-01 at
421m
MH19-05 336 -79 631 691646 5351376 399 Cut from MH19-04 at
757m
MH19-06 336 -79 860 691646 5351376 399 Cut from MH19-04 at
444m
MH19-07 336 -79 599 691646 5351376 399 Cut from MH19-06 at
657 m
MH20-01 337 -77 1355 692063 5351541 394
MH20-02 337 -77 1024 692063 5351541 394 Cut from MH20-01 at
422m
MH20-03 337 -77 509 692063 5351541 394 Cut from MH20-02 at
876m
MH21-01 321 -61 1496 692072 5351272 395
MH21-02 321 -61 563 692072 5351272 395 Cut from MH21-01 at
938m
MH21-03 321 -61 897 692072 5351272 395 Cut from MH21-01 at
555 m
MH22-01 342 -75 1617 691000 5350855 393
Note: UTM mine surface elevation 382 m
Table 4: Underground exploration drill holes; azimuth, dip, drilled length, and collar location at surface (UTM
NAD83).
Hole ID Azimuth
(°) Dip (°)
Drilled
Length
(m)
UTM
Easting
(m)
UTM
Northing
(m)
UTM Elevation (m)
340-602-24 160 -15 132 691455 5352213 61
340-602-25 159 -30 168 691455 5352213 61
340-602-26 147 -5 123 691456 5352213 61
340-602-27 148 -22 156 691455 5352213 61
340-602-37 144 -41 291 691455 5352213 61
620-550-46 133 -11 249 691021 5351907 -224
620-550-47 145 -24 261 691021 5351907 -224
620-604-14 170 -23 225 691530 5352086 -212
620-604-16 166 -41 342 691530 5352086 -213
620-604-17 166 -38 312 691530 5352086 -213
620-610-01 162 -39 312 691586 5352112 -211
620-610-04 146 -43 360 691586 5352112 -211
620-610-05 146 -38 321 691585 5352112 -211
620-610-06 146 -32 270 691586 5352112 -211
620-610-07 146 -21 204 691586 5352112 -211
620-610-08 143 -8 150 691586 5352112 -210
620-610-09 141 -26 243 691586 5352112 -211
620-610-10 139 16 117 691586 5352112 -209
620-610-11A 131 48 117 691587 5352112 -207
620-610-12 120 67 144 691585 5352113 -207
840-542-67 163 -45 294 690972 5351831 -466
840-554-01 159 -6 216 691083 5351880 -464
840-554-02A 159 -17 234 691082 5351879 -463
840-554-03 159 -27 258 691082 5351879 -463
840-554-04 159 -35 288 691082 5351879 -463
840-554-05 159 -48 378 691082 5351880 -464
840-554-06 156 -39 300 691082 5351879 -464
840-560-02 159 -18 222 691137 5351902 -461
840-560-03 159 -5 210 691137 5351902 -461
840-560-04 155 -44 351 691138 5351902 -462
840-560-05 155 -34 270 691138 5351902 -462
840-560-06 149 -10 210 691138 5351902 -461
840-560-07 149 3 210 691138 5351902 -461
840-560-08 147 -26 252 691137 5351902 -461
840-560-09 145 -42 333 691138 5351903 -462
840-560-10 143 -45 390 691138 5351903 -462
840-560-11 143 -33 276 691138 5351903 -462
Note: UTM mine surface elevation 382 m
Photos accompanying this announcement are available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/d8d15e7b-3d9b-4643-9e20-d45ab7711afe
https://www.globenewswire.com/NewsRoom/AttachmentNg/f6a206a5-8f08-489a-8508-6b0374ec61bb
https://www.globenewswire.com/NewsRoom/AttachmentNg/eb6e7e66-714b-43c6-b69b-683bfc7baf7f
https://www.globenewswire.com/NewsRoom/AttachmentNg/a5f77ebe-bf58-4e5c-9a38-552da9a71ee4