AbraSilver Drills Further Near-Surface High Grade Silver in New Southwest Zone Including 42.5 Metres at 408 g/t AgEq (5.8 g/t AuEq) New Southwest Zone is Located Hundreds of Metres Beyond Current Mineral Resources and Remains
220 Bay Street, Suite 550, Toronto, ON, M5J 2W4
www.abrasilver.com
AbraSilver Drills Further Near-Surface High Grade Silver in New Southwest Zone
Including 42.5 Metres at 408 g/t AgEq (5.8 g/t AuEq)
New Southwest Zone is Located Hundreds of Metres Beyond Current Mineral Resources and Remains
Open in All Directions
Toronto – October 12, 2022: AbraSilver Resource Corp. (TSX.V: ABRA; OTCQX: ABBRF)
(“AbraSilver” or the “Company”) is very pleased to announce new assay results from two holes drilled at
the Company’s newest near-surface, high-grade silver zone (the “Southwest zone”). The highly
prospective Southwest zone is located over 500 metres to the southwest of the Oculto Mineral Resource,
on the Company's wholly-owned Diablillos property in Salta Province, Argentina (“Diablillos” or the
“Project”).
Both of the latest holes returned excellent silver grades, in oxides near-surface. Key takeaways
include:
Hole DDH 22-046 returned 42.5 metres grading 408 g/t AgEq in oxides (5.8 g/t AuEq –
comprised of 401 g/t Ag and 0.11 g/t Au) starting at a down-hole depth of only 123 metres.
Hole DDH 22-044 intersected 58 metres at 223 g/t AgEq in oxides (3.2 g/t AuEq – comprised
of 209 g/t Ag and 0.20 g/t Au) starting at a down-hole depth of only 121 metres.
o Immediately beneath this high-grade oxide zone the hole encountered an additional 588
g/t AgEq (8.4 g/t AuEq – comprised of 542g/tAg and 0.35g/tAu) over 12.5 metres in
sulphides.
The latest assay result highlights are summarized in Table 1 below.
Table 1 – Diablillos Drill Results
(Intercepts greater than 2,000 gram-metres AgEq shown in bold text):
Drill Hole
From
(m)
To
(m) Type
Interval
(m)
Ag
g/t
Au
g/t
Cu
%
AgEq1
g/t
AuEq1
g/t
DDH-22-044 121 179 Oxides 58.0 208.8 0.20 - 222.8 3.18
DDH-22-044 Includes 167.5 172 Oxides 4.5 817.0 0.52 - 853.4 12.19
DDH-22-044 179 191.5 Sulphides 12.5 541.8 0.35 0.3 587.7 8.40
DDH-22-046 66 90 Oxides 24 64.0 0.01 - 64.4 0.92
DDH-22-046 92 112 Oxides 20 160.9 0.04 - 163.7 2.34
DDH-22-046 123 165.5 Oxides 42.5 400.5 0.11 - 408.2 5.83
Note: All results in this news release are rounded. Assays are uncut and undiluted. Widths are drilled widths, not true widths.
True widths are estimated to be approximately 80% of the interval widths.
1AgEq & AuEq calculations for reported drill results are based on USD $1,750/oz, $25.00/oz Ag & $3.00/lb Cu. The calculations
assume 100% metallurgical recovery and are indicative of gross in-situ metal value at the indicated metal prices.
John Miniotis, President and CEO, commented, “The new Southwest zone is clearly shaping up to be a
game-changer for the Diablillos project. We are incredibly delighted to have confirmed a brand-new,
near-surface, high-grade silver zone, which remains open in all directions and is located hundreds of
metres beyond the conceptual Oculto open pit.
This new high-grade silver zone adds a brand-new dimension to the Project, where we now see
considerable blue-sky potential to grow the Mineral Resources well beyond the update that will be
reported later this month. With the exciting upside potential of this new zone, we are convinced that
Diablillos has now fully emerged as one of the most exciting primary silver exploration projects anywhere
in the world.”
Dave O’Connor, Chief Geologist, commented, “We are very pleased with the excellent results returned
from the initial drill holes in the brand-new Southwest zone. This new zone now appears to be the most
prospective target on the entire Diablillos property, as the initial three holes clearly demonstrate
substantial potential for high-grade silver mineralization in an area which is covered by circa 50 metres
of unconsolidated overburden, making it ideal for potential open pit mining.
The mineralization in this zone is related to a large, linear magnetic anomaly which measures
approximately 600 metres in length and 200 metres in width. Our drilling to date has confirmed that the
silver mineralization in this area is shallow and high-grade, and now our focus is to determine the size
potential of this new exciting high grade silver zone.”
Figure 1 – Diablillos Plan View of Drill Results & Exploration Targets
Figure 2 below highlights the large magnetic anomaly in the new Southwest zone. The anomaly measures
approximately 600m in length and 200m in width, and the entire target has never had any previous drilling.
The main exploration target in the Southwest zone is now referred to as the “JAC Target”.
Figure 2 – Large Untested Magnetic Anomaly - Dimensions of 600m Long x 200m Wide
New Southwest Zone
The Company announced results from the first drill hole in the new Southwest zone, DDH 22-019, on
August 3, 2022. That discovery hole intercepted 87 metres at 346 g/t Ag and 0.15 g/t Au in oxides
from a downhole depth of only 89 metres. Following up on that discovery, the two holes announced
today were positioned 50 metres on either side of hole DDH 22-019, along strike. Both holes were drilled
to a down-hole depth of approximately 200 metres.
Hole DDH 22-044 is located 50 metres northeast of hole DDH 22-019. This hole intersected 58 metres
at 209 g/t Ag and 0.20 g/t Au from 121 to 179 metres in oxides . The hole then transitioned into a
sulphide zone, were it encountered 12.5 metres grading 542 g/t Ag and 0.35 g/t Au.
Hole DDH 22-046 was drilled 50 metres southwest of hole DDH 22-019. The hole encountered several
well-mineralized zones, including a zone of 42.5 metres of 401 g/t Ag and 0.11 g/t Au in oxides. Silver
mineralisation is hosted in oxidised hydrothermal breccia which is the typical host rock of the high-grade
silver mineralisation in the Southwest Zone.
To date, all three drill holes from the new Southwest zone have encountered high-grade silver
mineralization in oxides near-surface, ranking this new zone as the Company’s most prospective
exploration target. The Company has therefore increased the focus of this zone and placed both of its
Phase III drill rigs in this area. A total of 9 holes in the Southwest zone have now been drilled, including
hole DDH JAC-003, which is located over 300 metres southwest of the original discovery hole, DDH 22-
019.
The magnetic pattern associated with mineralization in the Southwest zone is believed to be a reflection
of structures that control hydrothermal fluids in this area. This intersecting pattern of structures is also
believed to control silver oxide mineralisation at the nearby Fantasma and Alpaca targets (see Figure 1
above). This results in a large area, totaling approximately 1.5 km north-south and 1.0 km east-west,
within which there are multiple magnetic targets scheduled to be drilled in the coming months.
Figure 3 – Cross Section of Results To Date in New Southwest Zone
*Note: Hole DDH 22-019 was reported on August 3rd, and intersected 87 metres @ 346 g/t Ag and 0.15 g/t Au, starting from a
downhole depth of 89m.
Collar Data
Hole Number UTM Coordinates Elevation Azimuth Dip Depth (m)
DDH 22-044 E719723 N7198804 4,170 0 -60 196.3
DDH 22-046 E719623 N7198764 4,161 0 -60 200
About Diablillos
The 80 km 2 Diablillos property is located in the Argentine Puna region - the southern extension of the
Altiplano of southern Peru, Bolivia, and northern Chile - and was acquired from SSR Mining Inc. by the
Company in 2016. There are several known mineral zones on the Diablillos property, with the Oculto
zone being the most advanced with over 100,000 metres drilled to date. Oculto is a high-sulphidation
epithermal silver-gold deposit derived from remnant hot springs activity following Tertiarty-age local
magmatic and volcanic activity. Comparatively nearby examples of high sulphidation epithermal deposits
include: Yanacocha (Peru); El Indio (Chile); Lagunas Nortes/Alto Chicama (Peru) Veladero (Argentina);
and Filo del Sol (Argentina).
The most recent Mineral Resource Estimate for the Oculto Deposit is shown in Table 2:
*
Table 2 - 2021 Mineral Resource Estimate for the Oculto Deposit, Diablillos Project
Category Tonnage
(000 t)
Ag
(g/t)
Au
(g/t)
Contained Ag
(000 oz Ag)
Contained Au
(000 oz Au)
Measured 8,235 124 0.98 32,701 259
Indicated 32,958 54 0.70 57,464 744
Measured &
Indicated 41,193 68 0.76 90,165 1,002
Inferred 2,884 34 0.70 3,181 66
Effective September 8, 2021. The Mineral Resource estimate and supporting Technical Report are N.I. 43-101 compliant. Full
details of the Mineral Resources are available in a Company news release dated September 15, 2021. For additional
information please see Technical Report on the Diablillos Project, Salta Province, Argentina, dated October 28, 2021,
completed by Mining Plus, and available on www.SEDAR.com.
QA/QC and Core Sampling Protocols
AbraSilver applies industry standard exploration methodologies and techniques, and all drill core samples
are collected under the supervision of the Company’s geologists in accordance with industry practices.
Drill core is transported from the drill platform to the logging facility where drill data is compared and
verified with the core in the trays. Thereafter, it is logged, photographed, and split by diamond saw prior
to being sampled. Samples are then bagged, and quality control materials are inserted at regular
intervals; these include blanks and certified reference materials as well as duplicate core samples which
are collected in order to measure sample representivity. Groups of samples are then placed in large bags
which are sealed with numbered tags in order to maintain a chain-of-custody during the transport of the
samples from the project site to the laboratory.
All samples are received by the SGS offices in Salta who then dispatch the samples to the SGS
preparation facility in San Juan. From there, the prepared samples are sent to the SGS laboratory in
Lima, Peru where they are analyzed. All samples are analyzed using a multi-element technique
consisting of a four acid digestion followed by ICP/AES detection, and gold is analyzed by 50g Fire Assay
with an AAS finish. Silver results greater than 100g/t are reanalyzed using four acid digestion with an ore
grade AAS finish.
Qualified Persons
David O’Connor P.Geo., Chief Geologist for AbraSilver, is the Qualified Person as defined by National
Instrument 43-101 Standards of Disclosure for Mineral Projects, and he has reviewed and approved the
scientific and technical information in this news release.
About AbraSilver
AbraSilver is a well-funded silver-gold focused advanced-stage exploration company. The Company is rapidly
advancing its 100%-owned Diablillos silver-gold project in the mining-friendly Salta province of Argentina, which
has a current Measured and Indicated Mineral Resource of over 90 million ounces of silver and 1.0 million ounces
of gold. The updated PEA study completed in November 2021 demonstrates that Diablillos has the potential to be
a highly-economic project. The Company is led by an experienced management team and has long-term supportive
shareholders including Mr. Eric Sprott. In addition, AbraSilver owns a portfolio of earlier-stage copper-gold projects
including the La Coipita copper-gold project in the San Juan province of Argentina. AbraSilver is listed on the TSX-
V under the symbol “ABRA” and in the U.S. under the symbol “ABBRF”.
For further information please visit the AbraSilver Resource website at www.abrasilver.com, our LinkedIn page at
AbraSilver Resource Corp., and follow us on Twitter at www.twitter.com/abrasilver
Alternatively please contact:
John Miniotis, President and CEO
Tel: +1 416-306-8334
Cautionary Statements
This news release includes certain "forward-looking statements" under applicable Canadian securities legislation.
Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while
considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause
the actual results and future events to differ materially from those expressed or implied by such forward-looking
statements. All statements that address future plans, activities, events or developments that the Company believes,
expects or anticipates will or may occur are forward-looking information. There can be no assurance that such
statements will prove to be accurate, as actual results and future events could differ materially from those
anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking
statements. The Company disclaims any intention or obligation to update or revise any forward-looking statements,
whether as a result of new information, future events or otherwise, except as required by law.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of
the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release