Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

ABRA.TO ·

AbraSilver Discovers New Silver Mineralization Beyond JAC Zone, Intersecting 1,042 g/t Silver Over 12 Metres Discovery Located +900m Beyond Limit of Current Mineral Resource Estimate & ~100m Northwest of JAC

Drill Results Resource Estimates

220 Bay Street, Suite 550, Toronto, ON, M5J 2W4

www.abrasilver.com

AbraSilver Discovers New Silver Mineralization Beyond JAC Zone,

Intersecting 1,042 g/t Silver Over 12 Metres

Discovery Located +900m Beyond Limit of Current Mineral Resource Estimate & ~100m Northwest of JAC

Toronto – August 09, 2023: AbraSilver Resource Corp. (TSX.V: ABRA; OTCQX: ABBRF)

(“AbraSilver” or the “Company”) is pleased to announce the latest assay results from the Phase III

diamond drilling program on the Company’s wholly-owned Diablillos property in Salta Province, Argentina

(“Diablillos” or the “Project”). Diamond drill holes DDH 23-055, DDH 23-056 and DDH 23-064 were step

out holes drilled to the northwest of the JAC zone, which coincides with a northeast-to-southwest

magnetic anomaly. The new holes intersected a promising new silver zone, called the ‘JAC North

zone’. Key takeaways include:

 Hole DDH 23-064 intersected a high-grade interval of 12 metres at 1,042 g/t Ag in oxides starting

at a down-hole depth of only 69 metres and including a 6 metre interval grading 1,880 g/t Ag.

 The three reconnaissance holes were drilled to test one of several remaining untested targets

indicated by magnetic anomalies located southwest of Oculto.

o The newly discovered JAC North zone is located over 900 metres beyond the limit of the

conceptual open pit that defines the current Mineral Resource estimate at Oculto and

approximately 100 metres northwest of the high-grade JAC zone.

 The new JAC North zone has the same geological characteristics as the JAC zone, namely that

silver mineralisation is concentrated in a highly fractured zone with pervasive alunite alteration and

associated manganese oxides and follows a parallel structural trend.

 The initial drill intercepts of this newly identified zone are very encouraging, and follow-up work is

planned as part of the next exploration drill campaign.

John Miniotis, President and CEO, commented, “Today’s announcement continues to highlight the

significant exploration upside potential at our Diablillos project. In particular, we are very excited with the

high-grade results encountered in hole DDH 23-064, which demonstrates the continuity of high-grade

silver mineralization well beyond the current JAC zone boundary. We fully expect the upcoming 2023

Mineral Resource estimate and Pre-Feasibility Study to confirm that Diablillos is a highly-attractive, long-

life, silver-gold project, which continues to display significant exploration upside potential.”

The latest assay result highlights are summarized in Table 1 and Table 2 below.

Table 1 –Drill Results in Newly Discovered ‘JAC North Zone’

(Intercepts greater than 2,000 gram-metres Ag shown in bold text):

Drill Hole

From

(m)

To

(m) Type

Interval

(m)

Ag

g/t

Au

g/t

DDH-23-055 55.0 117.0 Oxides 62.0 129.5 -

DDH-23-055 130.0 132.0 Oxides 2.0 128.4 -

DDH-23-055 164.0 171.0 Oxides 7.0 294.5 -

DDH-23-055 174.5 175.5 Oxides 1.0 108.5 -

DDH-23-056 53.0 74.0 Oxides 21.0 90.9 -

DDH-23-056 92.0 107.0 Oxides 15.0 101.3 -

DDH-23-056 156.5 158.5 Oxides 2.0 38.2 -

DDH-23-064 69.0 81.0 Oxides 12.0 1,041.7 -

DDH-23-064 includes 71.0 77.0 Oxides 6.0 1,879.7 -

Note: All results in this news release are rounded. Assays are uncut and undiluted. Widths are drilled widths, not true

widths. True widths are estimated to be approximately 80% of the interval widths for oxides.

Dave O’Connor, Chief Geologist, commented, “Hole DDH 23-064 is another great exploration success

from our team. With mineralization in the JAC North zone trending northeast under colluvial cover, parallel

to JAC, this confirms the potential for several mineralised zones parallel to the main JAC Zone, being

similar to the multiple sub-parallel mineralised structures identified at the Oculto deposit.”

Figure 1 – Plan View of Drill Holes Announced in this Release

Discussion of Drill Hole Results

Holes DDH 23-055, DDH 23-056 and DDH 23-064 were drilled northwest of the current JAC zone and

identified a promising new zone, called the ‘JAC North zone’. These reconnaissance holes were drilled

to test the margins of JAC mineralization and additional drilling is planned to explore for other mineralised

structures in the JAC area. Hole DDH 23-064 intersected a high-grade interval of 12 metres at 1,042 g/t

Ag in oxides starting at a down-hole depth of only 69 metres, including 6 metres grading 1,880 g/t Ag.

This hole is located over 900 metres beyond the limit of the conceptual open pit that constrains the current

Mineral Resource estimate at Oculto and approximately 100 metres northwest of the high-grade JAC

zone.

The JAC North zone discovery opens up considerable blue-sky potential. Previous holes in this area

include DDH 23-029, announced on May 25, 2023, with an intercept of 31.35 metres at 174.4 g/t Ag and

DDH 23-032, announced on June 26, 2023, with several silver intercepts, including 26 metres of 166.5

g/t Ag which, with the newly released holes demonstrate continuity of mineralisation in this new zone.

The discovery of a second northeast trending zone parallel to the main JAC zone demonstrates the

potential for multiple mineralised zones, as is the case at the Oculto deposit. We have also commenced

drilling to explore for a conjugate set of structures which would trend northwest and may connect the JAC

zones to silver mineralisation identified by previous drilling at the Alpaca target.

Two additional follow-up holes in the JAC North zone are now being drilled to test for continuity of high-

grade silver mineralization along strike. The JAC North zone will not be included in the upcoming Mineral

Resource Estimate, as it is at an early stage and requires additional drilling.

Our next phase of drilling (Phase IV) will explore additional targets which will all be prioritized based on

distance from the probable porphyry progenitor beneath Oculto and favourability of structural trends

reflected in magnetic surveys, with special reference to any historical drill data. Current priority targets in

the area west of Oculto include JAC North, Alpaca and Fantasma, with additional targets also being

developed to the east and north of Oculto.

Holes DDH 23-054, DDH 23-059, DDH 23-060, DDH 23-061 and DDH 23-062 were drilled to determine

the margins of the high-grade silver oxide mineralization at the JAC Zone, in preparation for the Mineral

Resource estimate to be announced later this year. The holes encountered silver mineralization along

the southeast margin of the JAC zone and were expected to be outside of the central high-grade

mineralised trend.

Table 2 – New Drill Results in JAC Zone

(Intercepts greater than 2,000 gram-metres Ag shown in bold text):

Drill Hole

From

(m)

To

(m) Type

Interval

(m)

Ag

g/t

Au

g/t

DDH-23-054 43.0 45.0 Oxides 2.0 62.6 -

DDH-23-054 52.0 56.0 Oxides 4.0 78.4 -

DDH-23-054 116.0 117.1 Oxides 1.1 53.9 -

DDH-23-059 68.0 71.0 Oxides 3.0 47.5 -

DDH-23-059 171.0 176.5 Oxides 5.5 142.7 0.26

DDH-23-060 84.0 85.5 Oxides 1.5 65.4 -

DDH-23-060 99.0 110.0 Oxides 11.0 106.6 -

DDH-23-060 116.0 118.5 Oxides 2.5 107.4 -

DDH-23-061 122.0 123.0 Oxides 1.0 46.5 -

DDH-23-061 134.0 153.5 Oxides 19.5 272.8 -

DDH-23-061 156.5 167.0 Oxides 10.5 138.5 -

DDH-23-062 100.0 101.0 Oxides 1.0 62.9 -

DDH-23-062 106.0 110.0 Oxides 4.0 84.5 -

DDH-23-062 118.0 121.0 Oxides 3.0 68.8 -

DDH-23-062 123.0 124.0 Oxides 1.0 45.1 -

DDH-23-062 155.0 161.0 Oxides 6.0 79.5 -

Note: All results in this news release are rounded. Assays are uncut and undiluted. Widths are drilled widths, not true

widths. True widths are estimated to be approximately 80% of the interval widths for oxides.

Figure 2 – Cross-Section Through Newly Announced Drill Holes in JAC North Zone & JAC Zone

Figure 3 – Plan of New JAC North Zone in Relation to JAC, Oculto and Alpaca

Upcoming Milestones and Catalysts

The Company anticipates announcing several upcoming milestones over the next few months, including:

 Announcing assay results from the remaining 14 holes from the Phase III program (ongoing)

 Submission of Environmental Impact Assessment (EIA) for Diablillos (August 2023)

 Updated Mineral Resource estimate for the Diablillos project (October 2023)

 Conduct a CSAMT geophysical survey at Diablillos and prioritize exploration targets (JAC North,

Alpaca, Fantasma, etc.) for the upcoming Phase IV drill campaign (Q4 2023).

 Pre-Feasibility Study completed for Diablillos project (December 2023)

Collar Data

Hole Number UTM Coordinates Elevation Azimuth Dip Depth (m)

DDH 23-054 E719527 N7198889 4,156 135 -60 191

DDH 23-055 E719150 N7198613 4,129 0 -60 197

DDH 23-056 E719150 N7198661 4,130 0 -60 167

DDH 23-059 E719750 N7198782 4,173 0 -60 200

DDH 23-060 E719500 N7198584 4,152 0 -60 185

DDH 23-061 E719574 N7198602 4,157 0 -60 167

DDH 23-062 E719374 N7198555 4,142 0 -60 182

DDH 23-064 E719250 N7198710 4,135 0 -60 149

About Diablillos

The 80 km 2 Diablillos property is located in the Argentine Puna region - the southern extension of the

Altiplano of southern Peru, Bolivia, and northern Chile - and was acquired from SSR Mining Inc. by the

Company in 2016. There are several known mineral zones on the Diablillos property, with the Oculto

zone being the most advanced with over 120,000 metres drilled to date. Oculto is a high-sulphidation

epithermal silver-gold deposit derived from remnant hot springs activity following Tertiarty-age local

magmatic and volcanic activity. Comparatively nearby examples of high sulphidation epithermal deposits

include: Yanacocha (Peru); El Indio (Chile); Lagunas Nortes/Alto Chicama (Peru) Veladero (Argentina);

and Filo del Sol (Argentina).

The most recent Mineral Resource estimate for the Oculto Deposit is shown in Table 2:

Table 2 - Oculto Mineral Resource Estimate – As of October 31, 2022

Category Tonnage

(000 t)

Ag

(g/t)

Au

(g/t)

Contained Ag

(000 oz Ag)

Contained Au

(000 oz Au)

Measured 19,336 98 0.88 60,634 544

Indicated 31,978 47 0.73 48,737 752

Measured &

Indicated 51,314 66 0.79 109,370 1,297

Inferred 2,216 30 0.51 2,114 37

Notes: Effective October 31, 2022. Mineral Resources are not Mineral Reserves and have not demonstrated economic

viability. The Mineral Resource estimate is N.I. 43-101 compliant and was prepared by Luis Rodrigo Peralta, B.Sc., FAusIMM

CP(Geo), Independent Consultant. The mineralization estimated in the Mineral Resource is sub-horizontal with sub-vertical

feeders and a reasonable prospect for eventual economic extraction by open pit methods. For additional information please

see Technical Report on the Diablillos Project, Salta Province, Argentina, dated November 28, 2022, completed by Mining

Plus, and available on www.SEDAR.com.

QA/QC and Core Sampling Protocols

AbraSilver applies industry standard exploration methodologies and techniques, and all drill core samples

are collected under the supervision of the Company’s geologists in accordance with industry practices.

Drill core is transported from the drill platform to the logging facility where drill data is compared and

verified with the core in the trays. Thereafter, it is logged, photographed, and split by diamond saw prior

to being sampled. Samples are then bagged, and quality control materials are inserted at regular

intervals; these include blanks and certified reference materials as well as duplicate core samples which

are collected in order to measure sample representivity. Groups of samples are then placed in large bags

which are sealed with numbered tags in order to maintain a chain-of-custody during the transport of the

samples from the project site to the laboratory.

All samples are received by the SGS offices in Salta who then dispatch the samples to the SGS

preparation facility in San Juan. From there, the prepared samples are sent to the SGS laboratory in

Lima, Peru where they are analyzed. All samples are analyzed using a multi-element technique

consisting of a four acid digestion followed by ICP/AES detection, and gold is analyzed by 50g Fire Assay

with an AAS finish. Silver results greater than 100g/t are reanalyzed using four acid digestion with an ore

grade AAS finish.

Qualified Persons

David O’Connor P.Geo., Chief Geologist for AbraSilver, is the Qualified Person as defined by National

Instrument 43-101 Standards of Disclosure for Mineral Projects, and he has reviewed and approved the

scientific and technical information in this news release.

About AbraSilver

AbraSilver is an advanced-stage exploration company focused on rapidly advancing its 100%-owned Diablillos

silver-gold project in the mining-friendly Salta province of Argentina. The current Measured and Indicated Mineral

Resource estimate for Diablillos consists of 51.3 Mt grading 66g/t Ag and 0.79g/t Au, containing approximately

109Moz silver and 1.3Moz gold, with significant further upside potential based on recent exploration drilling. The

Company is led by an experienced management team and has long-term supportive shareholders including Mr.

Eric Sprott. In addition, AbraSilver owns a portfolio of earlier-stage copper-gold projects including the La Coipita

copper-gold project in the San Juan province of Argentina. AbraSilver is listed on the TSX-V under the symbol

“ABRA” and in the U.S. under the symbol “ABBRF”.

For further information please visit the AbraSilver Resource website at www.abrasilver.com, our LinkedIn page at

AbraSilver Resource Corp., and follow us on Twitter at www.twitter.com/abrasilver

Alternatively please contact:

John Miniotis, President and CEO

[email protected]

Tel: +1 416-306-8334

Cautionary Statements

This news release includes certain "forward-looking statements" under applicable Canadian securities legislation.

Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while

considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause

the actual results and future events to differ materially from those expressed or implied by such forward-looking

statements. All statements that address future plans, activities, events or developments that the Company believes,

expects or anticipates will or may occur are forward-looking information. There can be no assurance that such

statements will prove to be accurate, as actual results and future events could differ materially from those

anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking

statements. When considering this forward-looking information, readers should keep in mind the risk factors and

other cautionary statements in the Company’s disclosure documents filed with the applicable Canadian securities

regulatory authorities on SEDAR at www.sedar.com. The risk factors and other factors noted in the disclosure

documents could cause actual events or results to differ materially from those described in any forward-looking

information. The Company disclaims any intention or obligation to update or revise any forward-looking statements,

whether as a result of new information, future events or otherwise, except as required by law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of

the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release