AbraPlata Intersects 350g/t Silver over 5m in additional drilling at its Diablillos Project in Argentina
AbraPlata Intersects 350g/t Silver over 5m in additional
drilling at its Diablillos Project in Argentina
Buenos Aires – August 29, 2017, - AbraPlata Resource Corp. ( TSX.V:ABRA; OTCQB: ABBRF; Frankfurt:
1AH) ("AbraPlata" or the "Company" ) is pleased to report results of the second batch of samples
received from SGS laboratories for holes DDH-17-132, DDH-17-133, and DDH-17-134 recently completed
at the Fantasma Mineralized Zone on its Diablillos property (Figure 1).
Drill hole DDH-17-134 (Figure 2) , whi ch was collared 70 m SE of hole D DH-17-128 (subject of news
release dated August 1, 2017) , intersected 193.7g/t Ag over 11m (from 92m – 103m down the hole),
including 348.8g/t Ag over 5m (from 93m – 98m) in which a single sample returned 795g/t Ag over 1m .
Additional mineralization was intersected further down the hole grading 102.7g/t Ag over 19m (from
133m – 152m), including 2m at 330.0g/t Ag (Figure 3). DDH-17-134 was angled at -60° along an azimuth
of 045°, and was designed to test steeply- to vertically-dipping mineralization striking NW-SE.
“Not only are we pleased to receive further confirmation of the tenor of mineralization at Fantasma, but
a clearer picture of the control to the epithermal mineralization at Diablillos is emerging,” comment ed
AbraPlata’s Executive Chairman, Hernan Zaballa. “Furthermore, the drilling to date is indicating that the
grades at Fantasma may be improving towards the SE and in the direction of Oculto; and this, in turn,
highlights the considerable potential for the addition of further resources to the resource picture at
Oculto from the Fantasma and Laderas zones, as well as from the immediate environs of Oculto itself –
particularly in the S where mineralization is still open. We will continue to report on the res ults of this
drilling as the assays become available from the laboratory and after the data have been compiled and
analyzed”.
Fantasma
The Fantasma Mineralized Zone is one of eight mineral occurrences on the property (Figure 1), and lies
some 600m west of the Oculto orebody which currently hosts all the indicated resources reported for
the property to date (see 43-101 Technical Report dated November 2, 2016 prepared by Roscoe Postle
Associates Inc which is filed under the Company’s profile on SEDAR). Silver-rich mineralization at
Fantasma outcrops at surface beneath a thin veneer of alluvium, and was identified by SSR Mining in
2012 from sampling done in five trenches over the Fantasma area. T hey followed up with four diamond
drill holes angled at -60° ( Figure 3), and intersected mineralization in all four holes. This mineralization,
initially, appeared to be confined to two gently dipping, stacked layers some 20m and 10m in thickness
respectively as indicated by hole DDH- 12-126 which intersected 24.1m @ 117.6g/t Ag in the upper zone
and 11.7m @ 185.6g/t Ag in the lower zone. This hypothesis also found some support in the Oculto
deposit model where the mineralization appears to be confined to a flattened prolate body fed by
vertically-orientated feeder s tructures. However, AbraPlata’s hole DDH -17-128 (Figure 3) , which was
drilled vertically and intersected mineralization grading 98.3g/t Ag over 52.0 m, also intersected a
number of vertically-oriented, vuggy quartz veins . Moreover, AbraPlata’s vertical h oles DDH -17-129,
DDH-17-130, and DDH -17-131, which were located some 50m due S, 70m SW, and 50m W o f DDH-17-
128 respectively (Figure 2), did not intersect mineralization and/or alteration suggesting that either: a)
the gently dipping, stacked, mineralized layers do not extend to the S and SE; or, and more likely , b )
vertical structural control is more important at F antasma, and appears to be striking in an NW -SE
direction.
DDH-17-132 and DDH -17-133 were collared some 100m due W and 110m WNW of DDH -17-128
respectively, and were designed to test alteration/mineralization along strike in a W NW direction as
indicated by a previous reverse circulation hole , DAR -90-51, drilled by BHP Billiton in 1990 (Figure 2) .
This hole returned results of 47.4g/t Ag over 8m (from 10m – 18m), 46.3g/t Ag over 3m (from 46m –
49m), and 43.8m over 3m (from 105m – 108m). DDH-17-132 was angled at -60° along an azimuth of
045°, while DDH-17-133 was angled at -60° along an azimuth of 225° (Figure 4). DDH-17-132 intersected
58.1g/t Ag over 11.35m (from 52m – 63.35m), including 108.5g/t Ag over 2m (from 53m – 55m), and
DDH-17-133 intersected 42.2g/t Ag over 7m (from 71m – 78m).
Mineralization is associated with a silicified zone, and best results typically report with the banded
and/or vuggy veins (Figure 5) . A zone of argillic alteration surrounds the silicified core; and, the argillic
zone may or may not have values associated with it.
The proximity of the Fantasma mineralization to the Oculto deposit is clearly shown in Figure 6.
Sampling Procedures & Quality Control Protocols
AbraPlata applies industry standard exploration methodologies and techniques, and all drill core
samples are collected under the supervision of the Company’s geologists in accordance with industry
practices. Dr ill core is transported from the drill platform to the logging facility where drill data is
compared and verified with the core in the trays. Thereafter , it is logged, photographed, and split by
diamond saw prior to being sampled. Samples are then bagged , and quality control materials are
inserted at regular intervals; these include blanks and certified reference materials as well as duplicate
core samples which are collected in order to measure sample representivity. Groups of samples are
then placed in large bags which are sealed with numbered tags in order to maintain a chain -of-custody
during the transport of the samples from the project site to the laboratory.
All samples are received by the SGS offices in Salta who then dispatch t he samples to the SGS
preparation facility in San Juan. From there, the prepared samples are sent to the SGS laboratory in
Lima, Peru where they are analyzed. All samples are analyzed using a multi -element technique
consisting of a four acid digestion followed by ICP/AES d etection, and gold is analyzed by 50g Fire Assay
with an AAS finish. Silver results greater than 100g/t are reanalyzed using four acid digestion with an
ore grade AAS finish.
An independent party has been appointed to review and report on the QA/QC program at the project.
Qualified Person
Willem Fuchter, PhD P Geo, President & CEO of AbraPlata Resource Corp. and a qualified person as
defined by National Instrument 43 -101 Standards of Disclosure for Mineral Projects, has reviewed and
approved the scientific and technical information contained in this news release.
About AbraPlata
Abraplata is a junior mining exploration company focused on delivering shareholder returns by
unlocking mineral value in Argentina. The Company's experienced management team has ass embled an
outstanding portfolio of gold, silver and copper exploration assets, and is foc used on advancing its
flagship Diablillos property , with an indicated resource of 81.3m oz Ag and 755k oz Au, through the
various stages of feasibility. In addition, AbraPlata owns the highly prospective Cerro Amarillo property
with its cluster of five mineralized Cu -(Mo-Au) porphyry intrusions located in a mining camp hosting the
behemoth El Teniente, Los Bronces, and Los Pelambres porphyry Cu-Mo deposits. Further exp loration
work is also planned for the Company’s Samenta porphyry Cu -Mo property south of First Quantum’s
TacaTaca project as well as its Aguas Perdidas Au-Ag epithermal property.
ON BEHALF OF THE BOARD
ABRAPLATA RESOURCE CORP.
"Willem Fuchter"
Willem Fuchter
President & Chief Executive Officer
For further information concerning this news release, please contact:
Willem Fuchter Karl Cahill
President & Chief Executive Officer VP Investor Relations
AbraPlata Resource Corp. AbraPlata Resource Corp
Tel: +54.11.5258.0920 Tel: +1.858.531.6100
E-mail: [email protected] Email: [email protected]
This news release includes certain "forward-looking statements" under applicable Canadian securities
legislation. Forward-looking statements are necessarily based upon a number of estimates and
assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties,
and other factors which may cause the actual results and future events to differ materially from those
expressed or implied by such forward -looking statements. All statements that address future plans,
activities, events or developments that the Company believes, expects or anticipates will or may occur
are forward -looking information. There can be no assurance that such statements will prove to be
accurate, as actual results and future events could differ materially from those anticipated in such
statements. Accordingly, readers should not place undue reliance on forward-looking statements. The
Company disclaims any intention or obligation to update or revise any forward-looking statements,
whether as a result of new information, future events or otherwise, except as required by law.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
For further information about AbraPlata and its projects, please visit the Company’s website at
www.abraplata.com.
Graben Valley Exploration Area
Basement Valley
Exploration Area
Mineral Deposit
Prospect
Fault
Tenement
Mineral Occurrence
Pedernales
Oculto
Laderas
Yolanda
Corderos
Cerro del
Medio
Cerro
Viejo
Fantasma
Figure 1 - The Diablillos Ag-Au property showing the various mineralized occurrences, including the Oculto Deposit, which hosts
the current indicated resources reported for the property.
K
0 1 2
Kilometers
7199550
7199600
7199650
7199700
7199750
719200
719250
719300
719350
719400
719450
Section Figure 4
Section Figure 3
Ag (g/t)
< 25
25 - 50
50 - 100
200 - 300
> 300
100 - 200
Lithology
Fault zone
± ± ± Altered Andesite with
stockworks and veinlets
« « «
« « « Massive Andesite
Colluvium
Figure 2 - Plan view of Fantasma drilling to date
50m
UTM WGS84 Zone 19S
± ±
± ±
± ±
± ±
±
«
« «
« «
« «
«
« «
« «
« «
« «
« «
«
«
± ±
± ± ± ±
± ±
«
« «
« « «
± ±
± ±
± ± ±
± ±
« ±
« «
«
«
« «
« « «
±
± ± ±
± ± ±
± ± ±
« « «
« «
± ±«
« «
« « « «
« «
± ±
± ± ±
± ± ±
± ±
±
« «
« « « «
« « «
«
± ±
«
« « «
«
± ±
« «
«
±±±±±±«««««««««
««««««««««««««
« «
±
± ±
±
«± ±«±
«
« «
« «
«
±
« «
« «
«
«±±
±±±
± ± ±
± ± ±
± ± ±
±±± ±
±« «
« «
«
« «
« «
«
« «
«« «
« «
«
«
« «
«
«
« « «
« «
«
±
± ±
± ±
« «
±
±
± ±
± ± ±
±
±
±
± ±
«
« «
| |
|
||
||
|
|
DAR-
90-51
138
m
25
50
75
100
125
-
41 m
25
57
m
25
50
DDH-12-126
89
m
25
50
75
DDH-12-127
119 m
25
50
75
100
DDH-17-128
20
100 m
70 m
DDH-17-131
40 m
DDH-17-132
80
m
25
50
75
98 m
25
50
75
DDH-17-134
161 m
25
50
75
100
125
150|
|
DDH-12-124
DDH-12-125|
DDH-17-130 DDH-17-129
DDH-17-133
4050
4100
4150
4200m asl
-50
50
100
0
-100
«
«
«
±
±
±
±
±
±
±
±
±
±
±
±
«
«
«
«
«
«
«
«
«
«
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
«
«
±
±
±
«
«
«
«
«
«
«
«
«
«
«
«
«
«
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
«
«
«
«
«
«
«
«
«
«
«
«
«
±
±
±
±
±
±
±
«
«
«
«
«
«
«
«
«
«
«
«
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
±
±
±
«
«
«
«
«
«
«
«
«
«
«
«
±
±
±
±
±
«
«
«
«
«
«
«
«
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
|
|
|
|
|
|
D
D
H
-
1
2
-
1
2
4
4
1
m
2
5
D
D
H
-
1
2
-
1
2
5
5
7
m
2
5
5
0
D
D
H
-
1
2
-
1
2
6
8
9
m
2
5
5
0
7
5
-
1
1
9
m
2
5
5
0
7
5
1
0
0
DDH-17-
128
25
50
75
100
125
150
175
DDH-17-129
1
0
0
m
25
50
75
1
0
0
DDH-17-
127
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±±
±
±± ±
± ±
± ±
±« «
« «
« «
« «
161 m
125
150
« «
«
« «
«
« ««
«
«± ±
±
± ±
±
± ±
± ±
±« «
« «
«
75
100
± ±
± ±
±
« «
« «
« «
« «
« «
«
|
DDH-17-134
25 «
« «
«
«« «
««
« «
««
« «
«
« «
50
«
«
«
«
« «
«
Ag (g/t)
< 25
25 - 50
50 - 100
200 - 300
> 300
100 - 200
Section window
Looking NW
100m
25m
Section
Lithology
Fault zone
± ± ± Altered Andesite with
stockworks and veinlets
« « «
« « « Massive Andesite
Colluvium
Figure 3 - Cross section through diamond drill hole DDH-17-134 indicating lithology and silver values. Note the results of the
the previous four drilled holes (2012) to the NW of DDH-17-134.
11.0m
@ 193.7g/t Ag
11.0m
@ 193.7g/t Ag
5.0m
@ 348.8g/t Ag
5.0m
@ 348.8g/t Ag
2.0m
@ 330.0g/t Ag
2.0m
@ 330.0g/t Ag
19.0m
@ 102.7g/t Ag
19.0m
@ 102.7g/t Ag
-50
50
100
0
-100
4050
4100
4150
4200m asl
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
1
3
8
m
7
5
1
0
0
1
2
5
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
«
«
«
«
5
0
2
5
D
A
R
-
9
0
-
5
1
|
Ag (g/t)
< 25
25 - 50
50 - 100
200 - 300
> 300
100 - 200
Section window
Looking NW
75m
50m
Section
Lithology
Fault zone
± ± ± Altered Andesite with
stockworks and veinlets
« « «
« « « Massive Andesite
Colluvium
Figure 4 - Cross section through diamond drill hole DDH-17-132 and DDH-17-133 indicating lithology and silver values. Note the
results of the previous RC hole (1990) to the E of DDH-17-132 and DDH-17-133.
«
«
«
««
«
««
«
«
««
«
«
«
«
««
««
«
«
«
«
«
«
« «± ±
± ±
± ±
±
± ±
±
« «±
±«
«± ±« «
« «
« «
« «
« «
« «
« «
«± ±«
«
« «
«
« «
«
« «
«±
± ±±
±
± ±±
±±
± ±
±
± ±
±
± ±
±
± ±
±
± ±
±
± ±
±
± ±
±±
± ±
±
± ±
±«
« «
«
« «
«
« «
«
| |
|
DDH-17-130
70 m
25
50
DDH-17-132
80 m
25
50
75
DDH-17-133
98 m
25
50
75
±
±
±
±
±
±
±
±
±
±
«
«
«
«
«
«
|
DDH-17-131
«
«
«
«
«
«
25
40 m
«
«
«
«
«
11.35m
@ 58.1g/t Ag
11.35m
@ 58.1g/t Ag
2.0m
@ 108.5g/t Ag
2.0m
@ 108.5g/t Ag
7.0m
@ 42.2g/t Ag
7.0m
@ 42.2g/t Ag