AbraPlata intersects 1237g/t Ag in ongoing drilling at Diablillos in Argentina
AbraPlata intersects 1237g/t Ag in ongoing drilling at Diablillos
in Argentina
Buenos Aires – September 12, 2017, - AbraPlata Resource Corp. (TSX.V:ABRA; OTCQB: ABBRF; Frankfurt:
1AH) ("AbraPlata" or the "Company") is pleased to report that it intersected 168.5g/t Ag over 29m (from
74m – 104m down the hole), including 707.0g/t Ag over 3m (from 79m – 82m) in which a single sample
returned 1237g/t Ag over 1m in ongoing drilling at the Fantasma Mineralized Zone on its Diablillos
property in northwestern Argentina. These results form part of the third batch of samples received
from SGS laboratories (see Table 1) for holes DDH-17-137 through D DH-17-142 (Figures 1, 2, & 3), and
refer to hole DDH-17-142 (Figure 1) which was collared 65m due W of DDH-17-128 (the first hole of the
current campaign and subject of news release dated August 1, 2017) ; DDH-17-142 was angled at -60°
along an azimuth of 045°.
Hole DDH-17-141 (Figure 2), which was collared 30m SW of DDH -17-128 and was also angled at -60°
along an azimuth of 045°, intersected 159.0g/t Ag over 8m (from 53m – 61m), including a single sample
that returned 519g/t Ag over 1m. Hole DDH-17-140 (Figure 2), collared 50m N of DDH -17-128,
intersected 94.6g/t Ag over 30m (from 28m – 58m), including 243.7g/t Ag over 3m (from 36m – 39m),
and was angled at -50° along an azimuth of 225°. Hole DDH -17-137 (Figure 3), collared some 150m due
E of hole DDH-17-128, was angled at -60° along an azimuth of 225°, and intersected 208.2g/t Ag over
19m (from 62m – 81m down the hole), including 382.0g/t Ag over 7m (from 69m – 76m) in which a
single sample returned 622g/t Ag over 1m. Holes DDH-17-138 and DDH-017-139 encountered zones of
alteration but did not intersect any significant mineralization.
“We are extremely pleased that the results from the lab continue to build a picture of a spatially
coherent body of mineralization at Fantasma ,” commented AbraPlata’s Executive C hairman, Hernan
Zaballa. “Moreover, the data received to date suggest that a core of mineralization, grading in the region
of 100 – 200g/t Ag, underlies the lower grade zone of mineralization of some 30 – 60g/t Ag intersected
closer to surface in the upper part of previously reported holes NW of reference hole DDH-17-128”.
Sampling Procedures & Quality Control Protocols
AbraPlata applies industry standard exploration methodologies and techniques, and all drill core
samples are collected under the supervision of the Company’s geologists in accordance with industry
practices. Drill core is transported from the drill platform to the logging facility where drill data is
compared and verified with the core in the trays. Thereafter , it is logged, photographed, and split by
diamond saw prior to being sampled. Samples are then ba gged, and quality control materials are
inserted at regular intervals; these include blanks and certified reference materials as well as duplicate
core samples which are collected in order to measure sample representivity. Groups of samples are
then placed in large bags which are sealed with numbered tags in order to maintain a chain -of-custody
during the transport of the samples from the project site to the laboratory.
All samples are received by the SGS offices in Salta who then dispatch t he samples to t he SGS
preparation facility in San Juan. From there, the prepared samples are sent to the SGS laboratory in
Lima, Peru where they are analyzed. All samples are analyzed using a multi -element technique
consisting of a four acid digestion followed by ICP/AE S detection, and gold is analyzed by 50g Fire Assay
with an AAS finish. Silver results greater than 100g/t are reanalyzed using four acid digestion with an
ore grade AAS finish.
An independent party has been appointed to review and report on the QA/QC program at the project.
Qualified Person
Willem Fuchter, PhD P Geo, President & CEO of AbraPlata Resource Corp. and a qualified person as
defined by National Instrument 43 -101 Standards of Disclosure for Mineral Projects, has reviewed and
approved the scientific and technical information contained in this news release.
About AbraPlata
Abraplata is a junior mining exploration company focused on delivering shareholder returns by
unlocking mineral value in Argentina. The Company's experienced management team has assembl ed an
outstanding portfolio of gold, silver and copper exploration assets, and is foc used on advancing its
flagship Diablillos property , with an indicated resource of 81.3m oz Ag and 755k oz Au, through the
various stages of feasibility. In addition, AbraPlata owns the highly prospective Cerro Amarillo property
with its cluster of five mineralized Cu -(Mo-Au) porphyry intrusions located in a mining camp hosting the
behemoth El Teniente, Los Bronces, and Los Pelambres porphyry Cu-Mo deposits . Further exploration
work is also planned for the Company’s Samenta porphyry Cu -Mo property south of First Quantum’s
TacaTaca project as well as its Aguas Perdidas Au-Ag epithermal property.
ON BEHALF OF THE BOARD
ABRAPLATA RESOURCE CORP.
"Willem Fuchter"
Willem Fuchter
President & Chief Executive Officer
For further information concerning this news release, please contact:
Willem Fuchter Karl Cahill
President & Chief Executive Officer VP Investor Relations
AbraPlata Resource Corp. AbraPlata Resource Corp
Tel: +54.11.5258.0920 Tel: +1.858.531.6100
E-mail: [email protected] Email: [email protected]
This news release includes certain "forward-looking statements" under applicable Canadian securities
legislation. Forward-looking statements are necessarily based upon a number of estimates and
assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties,
and other fa ctors which may cause the actual results and future events to differ materially from those
expressed or implied by such forward -looking statements. All statements that address future plans,
activities, events or developments that the Company believes, expe cts or anticipates will or may occur
are forward -looking information. There can be no assurance that such statements will prove to be
accurate, as actual results and future events could differ materially from those anticipated in such
statements. According ly, readers should not place undue reliance on forward-looking statements. The
Company disclaims any intention or obligation to update or revise any forward-looking statements,
whether as a result of new information, future events or otherwise, except as required by law.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
For further information about A braPlata and its projects, please visit the Company’s website at
www.abraplata.com.
From
(m)
To
(m)
Interval
(m) Ag (g/t)
62 81 19 208.2
including
69 76 7 382.0
DDH-17-138 4232.408 98 45 -45
DDH-17-139 4241.511 92 45 -55
28 58 30 94.6
including
36 39 3 243.7
22 27 5 54.3
53 61 8 159.0
including
59 61 2 363.0
75 104 29 168.5
including
79 82 3 707.0
including
100 103 3 270.7
Table 1 - Significant assay results at Fantasma from hole DDH-17-135 to hole DDH-17-142.
no significant intersections
-50
HOLE ELEV
INTERCEPT
AZIMUTH DIPDEPTH
DDH-17-137 4217.086 102 225 -60
DDH-17-142 4222.518 115 45 -60
DDH-17-141 954219.416 45 -60
no significant intersections
DDH-17-140 4218.312 71 225
<25
25 to 50
50 to 100
100 to 200
200 to 300
>300
Ag (g/t)
4100
4150
4200
4250m asl
100
-100
-50
0
50
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±
± ±« «
« «
« ««
« «
« «
« «
«
« «
« «
« «
«
«
« «
« «
« «
« «
« «
« «
« «
« «
« «
« «
« «
« «
« «
« «
« «
« «
« «
«
±
±
±
±
±« «
« «
« «
« «
« «« «
« «
« «
« «
« «
« «
«± ±
± ±
± ±
± ±
± ±
±« «
« «± ±
±«±« «
« «
« «
« «
« «
« «
« «
« «±
±«
« «
« «
« «
« «
« «
138 m
25
50
75
100
125
DDH-17-131
40 m
25
80 m
25
50
75
DAR-90-51
DDH-17-132
| |
|
Ag (g/t)
< 25
25 - 50
50 - 100
200 - 300
> 300
100 - 200
Section window
Looking NW
25m
25m
Section
Figure 1 - Cross section through diamond drill hole DDH-17-142 indicating lithology and silver values.
Lithology
Fault zone
± ± ± Altered Andesite with
stockworks and veinlets
« « «
« « « Massive Andesite
Colluvium
« «
« «
«
115 m
« «
« «±
±
±
± ±
± ±
± ±
± ±
± ±
±
0
±
± ±
± ±
± ±
± ±
± ±75
« «
« «
« «
« «
«
« «
« «
« «
«
« «
« «
« «
« «
« «
« «
«
50
«±
± ±
± ±
± ±
±
25
±
± ±
± ±
±
|
DDH-17-142
01
3.0m
@ 707.0g/t Ag
3.0m
@ 707.0g/t Ag
29.0m
@ 168.5g/t Ag
29.0m
@ 168.5g/t Ag
3.0m
@ 270.7g/t Ag
3.0m
@ 270.7g/t Ag
4150
4200
4250m asl
4100
-100
-50
0
50
100
|«
« «
« «± ±
± ±
± ±
± ± ±
± ±
± ±
± ± ±
± ±
± ±
± ±« «
« ««
« «
« «
« «
« « «
« «
« «
« «
±
± ±
±± ±
± ± ±
± ±
± ±
± ± ±
± ±
± ±
± ± ±
± ±
± ±
± ±
±« «
«± ±
± ±«
« «
« « «
« «« ««
« «
« « «
« «
« «
« « «
« «
« «
« «
«
±
± ±± ±
± ± ±
± ±
± ±
± ± ±
± ±
± ±
± ± ±
± ±
± ±
± ± ±
± ±
± ±
± ± ±
± ±
±
«
« «
« « «
« «
« «
« «
« «
« «
« «
« «
« «± ±
± ±
± ±
± ± ±
± ±
±« «
« «
«
« «
« «
« «
« « «
« «
« «
« « «
« «
« «
« «±
±
±
±
±
±
±
±
±
±
±
±
±
±±
±
±
±
±±
±±
±
±
±
±
±
±
±
±
±
±±
±
±
±
±
±«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
««
«
«
«
«
«
««
«
«
«
«
«
«
«
«
«
«
««
«
«
««
«
«
«
«
«
«
«
«
«
«
«
«
««
««
«
«
«
«
«
41 m
25
57 m
25
50
DDH-12-124
89 m
25
50
75
DDH-17-128
25
50
75
100
DDH-17-130
70 m
25
50
DDH-12-126DDH-12-125
|
| | |
« «
« « «
« « «
« «
« «
« «
«
±
±± ±« «
« « «± ±
± ± ±
± ± ±
± ±± ±
± ±±
± ±
±± ±±
± ±
± ± ±
± ± ±
±± ±± ±
± ±
± ±
± ±
± ± ±
± ± ±
±« «
« « «
« «
« «
« «
« « «
«
±
±
± ±
± ±
± ±
± ± ±
± ±« «
« «
« «
« «
« «± ±
± ±
± ± ±
± ±« «
« «
« «
« «
« « «
« «
« «
« «
« «
« «±
± ±
± ± ±
± ±
± ±
± ±« «
« «
« «
« «
« « «
« «
« « «
« «
« «
« «
« «
« ««
«
« «
« «
« « «
« «
« «
« «
DDH-17-140
71 m
25
50
DDH-17-141
95 m
25
50
75
| |
Ag (g/t)
< 25
25 - 50
50 - 100
200 - 300
> 300
100 - 200
Section window
Looking NW
25m
25m
Section
Figure 2 - Cross section through diamond drill holes DDH-17-140 and DDH-17-141 indicating lithology and silver values.
Lithology
Fault zone
± ± ± Altered Andesite with
stockworks and veinlets
« « «
« « « Massive Andesite
Colluvium
30.0m
@ 94.6g/t Ag
30.0m
@ 94.6g/t Ag
3.0m
@ 243.7g/t Ag
3.0m
@ 243.7g/t Ag
8.0m
@ 159.0g/t Ag
8.0m
@ 159.0g/t Ag
2.0m
@ 363.0g/t Ag
2.0m
@ 363.0g/t Ag
5.0m
@ 54.3g/t Ag
5.0m
@ 54.3g/t Ag
4050
4100
4150
4200
4250m asl
-100
-50
0
50
100100
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
«
±
±
±
±
±
±
±
±
±
«
«
«
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
«
«
«
«
«
DDH-17-134
1
6
1
m
2
5
5
0
7
5
1
0
0
1
2
5
1
5
0
|
Ag (g/t)
< 25
25 - 50
50 - 100
200 - 300
> 300
100 - 200
Section window
Looking NW
25m
25m
Section
Lithology
Fault zone
± ± ± Altered Andesite with
stockworks and veinlets
« « «
« « « Massive Andesite
Colluvium
Figure 3 - Cross section through diamond drill hole DDH-17-137 indicating lithology and silver values.
« «
«
« «
« «
« «
«««« «
« «««
« «±
±«±
±« «
«
± ±
± ±
± ±
±« «
« «±
± ±
±«
« «
« «
« «
« «
« «
DDH-17-137
25
50
75
100
1 2 m0
|
19.0m
@ 208.2g/t Ag
19.0m
@ 208.2g/t Ag
7.0m
@ 382.0g/t Ag
7.0m
@ 382.0g/t Ag