AbraPlata Intercepts 14 Metres of 6.40 g/t Gold & 197 g/t Silver and Identifies High- Grade Copper Zone with Intercept of 15 Metres of 5.1% Copper, 2.35 g/t Gold & 658 g/t Silver
220 Bay Street, Suite 550, Toronto, ON, M5J 2W4
www.abraplata.com
AbraPlata Intercepts 14 Metres of 6.40 g/t Gold & 197 g/t Silver and Identifies High-
Grade Copper Zone with Intercept of 15 Metres of 5.1% Copper, 2.35 g/t Gold & 658 g/t
Silver
Toronto - February 19, 2020: AbraPlata Resource Corp. (TSX.V:ABRA; OTCPK: ABBRF)
("AbraPlata" or the “Company”) is pleased to announce significant high-grade assay results from the third
diamond drill hole, DDH 20-001, completed at the Oculto deposit, located on its wholly-owned Diablillos
project in Salta province, Argentina. In addition to intercepting high-grade gold and silver mineralisation,
DDH 20-001 intercepted high-grade copper mineralisation in the vertical continuation of a hydrothermal
breccia beneath the current gold and silver resources at Oculto (see Table 2).
Hole DDH 20-001 was drilled to a depth of 359 metres to test for the vertical continuation of the Main
Breccia below the existing mineral resources (Figures 1 and 2). DDH 20-001 intersected 14 metres
grading 6.40 g/t gold with 197 g/t silver from 261 metres, which is interpreted to be part of the high-grade
gold zone at the unconfirmity contact between the volcanics and basement. Immediately underneath this
gold-rich interval, drilling intersected 15 metres of sulphide mineralisation grading 5.10% copper, 2.35 g/t
gold and 658 g/t silver including 4 metres grading 10.28% copper, 6.44 g/t gold and 1,476 g/t silver (see
Table 1).
Table 1 – DDH 20-001 Drill Result Highlights:
From
(m) To (m) Type
Interval
(m)
Silver
g/t
Gold
g/t
AgEq1
g/t
Copper
%
146 160 Oxides 14 133 0.10 117 -
165 191 Oxides 26 264 0.03 220 -
261 290 Mixed 29 430 4.30 630 2.77
Including 261 275 Transition 14 197 6.40 574 2.53
and 275 290 Sulphides 15 658 2.35 691 5.10
Note: True widths are estimated to be 80% of the interval widths.
1 Silver Equivalent (" AgEq") excludes copper and is calculated based on a gold to silver ratio of 75:1 and assumes
average LoM recoveries of 86% Au and 82% Ag from the 2018 PEA. For example, AgEq = (Ag grade * 82%) + (Au
grade x 75 * 86%).
The highlight copper, silver, and gold intercepts are shown on cross sections in Figures 2, 4 and 5,
respectively. A summary table of the full assay results, including copper, from the three holes drill holes
completed to date is set out in Annex I.
John Miniotis, President and CEO of AbraPlata, commented, “Drilling results at Oculto continue to exceed
expectations and further demonstrate the continuity of high-grade mineralisation within and outside the
current mineral resource. Most importantly, results continue to validate our geological interpretation and
have increased our confidence in multiple high potential targets, which we expect to drill -test over the
coming months.”
“We have now intersected the highest grade copper mineralisation ever observed at Oculto which we
believe may be the upper part of an intrusive system that was the mineralizing engine for the overlying
high sulphidation epithermal silver-gold system and has not been tested at depth. This represents a major
new exploration target at the Oculto project,” said David O’Connor, Chief Geologist at AbraPlata.
Figure 1 – Plan Map of Oculto Zone with 2019/2020 Drill Holes
Figure 2 - Cross-Section (Looking East) with Highlight Copper Intercepts in Hole DDH 20-001
West Breccia Main Breccia
Copper Mineralisation at Oculto
DDH 20-001 intersected significant intervals of higher grade copper mineralisation than have ever been
encountered in the +450 drill holes (approx. 88,000 metres) of historic drilling on the Diablillos project. A
number of holes from previous drill campaigns did intersect substantial copper sulphide mineralisation at
depth, but exploration was foc used on oxide mineralisation and drilling was typically stopped even if in
sulphide mineralisation. Highlights of historical copper intercepts are shown in Figure 5 below.
Figure 3 – Long Section Showing Some Historical Copper Intercepts at Oculto (looking north)
The copper sulphide mineralisation in DDH 20-001 from 275 to 290 metres is associated with siliceous
breccias that cut basement rocks beneath the andesitic volcanics that are the main host of epithermal
silver and gold oxide mineralisation. Massive to disseminated sulphide mineralisation in this interval is
described as chalcopyrite, possibly bornite, with minor enargite and with associated galena in places.
While some historical copper intercepts at Oculto are associated with elevated levels of arsenic, the high-
grade copper intercept in the Main Breccia intercepted by DDH 20-001 had low levels of arsenic (i.e., As
= 0.037%). Mineralogical studies are ongoing to confirm the copper bearing phases and identify the gold
and silver association. Metallurgical testing as appropriate will follow.
Next Steps
Given the positive results from the three initial holes drilled to date , the Company is review ing and
interpreting the new information and historical drill results in order to select the next batch of drill targets.
The initial drill results to date support our belief that the Oculto deposit, despite its already large Indicated
silver-gold resource, has excellent potential for expansion of the resource. High-grade results over broad
widths reinforce our view that Oculto might ultimately be better suited to bulk underground mining
targeting high grade cyanide leachable zones, which could require substantially less initial capex than an
open pit mine. Besides the potential for additional near surface silver -gold oxide minerali sation, t he
identification of high grade gold-silver-copper sulphides beneath the current silver -gold oxide resource
also opens up new exploration opportunities, both at Oculto and in general on the Diablillos property.
Figure 4 - Cross-Section (Looking East) with Highlight Silver Intercepts in Hole DDH 20-001
Figure 5 - Cross-Section (Looking East) with Highlight Gold Intercepts in Hole DDH 20-001
About Diablillos
The 80 km2 Diablillos property is located in the Argentine Puna region - the southern extension of the
Altiplano of southern Peru, Bolivia, and northern Chile - and was acquired from SSR Mining Inc. by the
Company in 2016. There are several known mineral zones on the Diablillos property, with the Oculto
zone being the most advanced with approximately 85,000 metres drilled in 306 RC and diamond drill
holes. Oculto is a high-sulphidation epithermal silver-gold deposit derived from remnant hot springs
activity following Tertiarty-age local magmatic and volcanic activity. Comparatively nearby examples of
high sulphidation epithermal deposits include: El Indio, Chile; Veladero, Argentina; and Pascua Lama,
on the Chile-Argentine border.
Table 2 - 2018 Mineral Resource Estimate for the Oculto Deposit, Diablillos Project
Category Tonnage
(000 t)
Ag
(g/t)
Au
(g/t)
Contained Ag
(000 oz Ag)
Contained Au
(000 oz Au)
Indicated 26,900 93.0 0.85 80,300 732
Inferred 1,000 46.8 0.89 1,505 29
Effective August 31, 2017. Full details of the Mineral Resources are available in a Company news release dated March 2,
2018. For additional information please see Technical Report on the Diablillos Project, Salta Province, Argentina, dated April
16, 2018, completed by Roscoe Postle Associates Inc, and available on www.SEDAR.com.
QA/QC and Core Sampling Protocols
AbraPlata applies industry standard exploration methodologies and techniques, and all drill core
samples are collected under the supervision of the Company’s geologists in accordance with industry
practices. Drill core is transported from the drill platform to the logging facility where drill data is
compared and verified with the core in the trays. Thereafter, it is logged, photographed, and split by
diamond saw prior to being sampled. Samples are then bagged, and quality control materials are
inserted at regular intervals; these include blanks and certified reference materials as well as duplicate
core samples which are collected in order to measure sample representivity. Groups of samples are
then placed in large bags which are sealed with numbered tags in order to maintain a chain-of-custody
during the transport of the samples from the project site to the laboratory.
All samples are received by the SGS offices in Salta who then dispatch the samples to the SGS
preparation facility in San Juan. From there, the prepared samples are sent to the SGS laboratory in
Lima, Peru where they are analyzed. All samples are analyzed using a multi-element technique
consisting of a four acid digestion followed by ICP/AES detection, and gold is analyzed by 50g Fire
Assay with an AAS finish. Silver results greater than 100g/t are reanalyzed using four acid digestion
with an ore grade AAS finish.
Qualified Persons
David O’Connor P.Geo., Chief Geologist for AbraPlata, is the qualified person as defined by National
Instrument 43-101 Standards of Disclosure for Mineral Projects, has reviewed and approved the
scientific and technical information in this news release.
ANNEX 1 – Drill Result Summary of Holes DDH 19-001, DDH 19-002 and DDH 20-001.
Note: Drill Holes DDH 19-001 and DDH 19-002 values of gold and silver were previously reported.
Drill Hole From
(m) To (m) Intercept
(m)
Thickness
(m) Ag (g/t) Au (g/t) Cu (%)
DDH 19-001
166.0 231.0 65.0 54.20 105 0.20 -
including 201.0 204.0 3.0 2.50 346 0.30 -
302.0 312.0 10.0 8.0 10 0.08 0.86
326.0 327.0 1.0 0.83 48 0.93 1.76
353.0 354.0 1.0 0.83 15 6.93 0.54
DDH 19-002
56.0 78.0 22.0 18.33 17 2.74 -
including 57.0 60.0 3.0 2.50 104 2.91 -
137.5 155.0 17.5 14.58 604 0.10 -
180.0 200.0 20.0 16.67 140 0.03 -
242.0 257.0 15.0 12.50 286 10.42 -
including 250.0 257.0 7.0 5.83 202 20.64 -
367.0 376.0 9.0 4.50 49 7.31 1.28
including 371.0 376.0 5.0 2.50 17 11.27 1.48
369.0 400.0 31.0 25.00 25 2.27 1.30
438.0 450.0 12.0 6.00 24 0.47 1.60
DDH 20-001
146 160 14.0 11.20 133 0.10 -
165 191 26.0 20.80 264 0.03 -
261 290 29.0 23.20 430 4.30 2.77
including 261 275 14.0 11.20 197 6.40 2.53
including 278 282 15.0 12.00 658 2.35 5.10
Collar Data
Hole Number UTM Coordinates Elevation Azimuth Dip Depth
DDH 19-001 X 720293 Y 7199273 4315 0 -60 380 m
DDH 19-002 X 720295 Y 7199404 4300 0 -60 464 m
DDH 20-001 X 720197 Y 7199235 4267 0 -60 359 m
About AbraPlata
AbraPlata is a mineral exploration company with a diversified portfolio of silver-gold and copper exploration projects
in Argentina and Chile. The Company is focused on advancing its 100% -owned Diablillos silver-gold project in the
mining-friendly Salta province of Argentina, which is well-advanced, with more than US$35 million spent historically
on exploration with drilling ongoing and an initial open pit PEA completed in 2018. The Company is led by an
experienced management team and has long -term supportive shareholders including Altius Minerals and SSR
Mining. In addition, AbraPlata owns the Arcas project in Chile where Rio Tinto has an option to earn up to a 75%
interest by funding up to US$25 million in exploration. AbraPlata is listed on the TSX -V under the symbol “ABRA”.
For further information please visit the AbraPlata Resource website at www.abraplata.com or contact:
John Miniotis, President & CEO
Tel: +1 416-306-8334
Cautionary Statements
This news release includes certain "forward-looking statements" under applicable Canadian securities legislation.
Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while
considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause
the actual results and future events to differ materially from those expressed or implied by such forward-looking
statements. All statements that address future plans, activities, events or developments that the Company believes,
expects or anticipates will or may occur are forward-looking information. There can be no assurance that such
statements will prove to be accurate, as actual results and future events could differ materially from those
anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking
statements. The Company disclaims any intention or obligation to update or revise any forward-looking statements,
whether as a result of new information, future events or otherwise, except as required by law.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of
the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.
###