Saturday, September 26, 2026
MiningNewsTerminal
Saturday, September 26, 2026 Admin

ABI.V ·

Abcourt Intersects 57.5 g/t over 0.6 m at the Sleeping Giant Mine

Drill Results

For Immediate Release

TSX Venture Exchange: ABI. V

Abcourt Intersects 57.5 g/t over 0.6 m at the Sleeping Giant Mine

Rouyn-Noranda, Canada, November 27, 2024 – Abcourt Mines Inc. (“Abcourt” or the

“Corporation”) (TSX Venture: ABI) (OTCQB: ABMBF) is pleased to provide an update on

the results of the underground diamond drilling campaign at the Sleeping Giant mine.

The highlights included in this press release are as follows:

 57.48 g/t Au over 0.6 meter in hole 23-493;

 65.16 g/t Au over 0.5 meter in hole 23-495.

As part of the mineral resource update in progress by GoldMinds Geoservices Inc. and to

support engineering work in the preparation of an economic prefeasibility study, Abcourt has

completed 48 underground drill holes totaling more than 4,843 meters from December 2023 to

October 31, 2024.

Of these 48 holes, 11 holes totaling 1,118 metres were drilled in the Zone 20 West sector to

better define the zone and optimize the dimensions of the mineralized envelope of the unmined

part of this zone.

Abcourt presents the main drilling results from Zone 20 West (see Table 1):

Table 1: Zone 20 West Drilling Intersections. Only Intervals with a Metal

Factor Greater than 10.0 (g/t Au x metres) are Reported.

#DDH From To Interval Au Metal Factor

(m) (m) (m) (g/t) (g/t Au x m)

23-485* 57.4 58.4 1.0 46.07 46.07

23-489* 62.0 62.5 0.5 125.67 62.84

23-493 78.5 79.1 0.6 57.48 34.49

23-495 57.5 58.0 0.5 65.16 32.58

Notes:

* Drill holes whose results have already been published in the press release of August 27, 2024.

1. The metal factor is defined as gold grade multiplied by core length (measured along the drill core).

Holes were drilled at various angles and the true widths are unknown at this time.

2. Assay results are not capped, but higher-grade sub-intervals are highlighted.

The main results of the holes drilled in Zone 20 West are illustrated in a longitudinal section (Figure 1)

Figure 1: Zone 20 West, Longitudinal Section.

Based on data from 32 holes (totaling over 3,700m) drilled from several underground levels

to test the gold grade continuity of Zone 20 West. In addition to that, the mapping and

underground sampling data were also used by the Sleeping Giant mine technical team, in

collaboration with the GoldMinds Geoservices team to update the mineralized wireframe.

After the compilation and the validation of the new drill holes data, GoldMinds Geoservices

updated the mineral resources of the modified wireframe. The table 2 shows the resources

differences between the old (wireframe documented in the PEA 2023) and the updated

wireframe.

Table 2: Comparative Table of Tonnes and Grade of Zone 20 West

PEA 2023 Vs ME 2024

Ressources PEA 2023 ME 2024* Var.

Indicated

Metrique Tonnes (t) 7129 9 610 35%

Grade (g/t) Au 6.44 12.90 100%

Troy Onces (oz. Au) 1476 3 980 170%

Inferred

Metrique Tonnes (t) 2438 930 -62%

Grade (g/t) Au 8.14 9.99 23%

Troy Onces (oz. Au) 638 300 -53%

Notes:

* ME 2024: Mineralized Envelope 2024. Disclaimer: These mineral resources are not mineral reserves as they do not

have demonstrated economic viability. The quantity and grade of the inferred resources reported in this mineral resource

estimate are uncertain and there has been insufficient exploration to define these inferred resources as indicated and it is

uncertain whether further exploration will result in their upgrade to these categories.

The resources are presented undiluted and in situ with a maximum elevation of Z= 4,800m. The resources are considered

to have reasonable prospects for economic extraction. The underground resources are limited by mineable forms.

Interpretation was initially made from cross-sections at intervals, and then completed in GENESIS, a modelling software,

where selections of mineralization intervals were combined to generate mineralization wireframes. Envelopes are generally

subvertical with various plunges.

The wireframe used for the zone with a minimum width of 1.9m.

The 95 g/t Au capping was performed on assay data and a density value of 2.85t/m3 was used.

The blocks have a dimension of 1m North, 1m East and 1m height. Inverse distance squared grade estimation was used.

Samples were grouped within the mineralization envelopes into 0.5-metre-long composites. A zero-grade value was

applied in the case of unassayed cores.

The estimate is classified as an indicated and inferred mineral resource. The estimates use metric units (metres, tonnes

and g/t). The metal content is presented in troy ounces (metric tonne grade / 31.10348).

The mined-out volume was removed from the updated wireframe.

The economic parameters as well as the technical requirements of the 2022 ERM have been respected in the calculation.

The estimate is presented for potential underground scenarios at a cut-off grade of 4.25 g/t Au for the long-hole method.

The cut-off grades were calculated using a gold price of US$1,650 per ounce and a USD/CAD exchange rate of 1.30; a

mining cost of CA$213.96/t (long-hole), a processing cost o f CA$35.10/t; and general and administrative costs of

CA$22.09/t. Cut-off grades should be re-evaluated in light of future market conditions (metal prices, exchange rates, mining

costs, etc.).

Drilling operations continued underground at level 235. Six (6) holes totaling 480 meters

were drilled. Verification and interpretation of the results of these holes are in progress.

Drilling operations continue underground at level 295 in Zone 4.

Abcourt has mandated GoldMinds Geoservices Inc. to support the technical team of the

Sleeping Giant mine in:

• Updating the mineral resource estimate for the Sleeping Giant Mine property ;

• Supporting the engineering work required to prepare the prefeasibility study ; and

• Developing a geo-structural model that supports the vein model to guide exploration

of the Sleeping Giant mine extensions.

Next Steps

• Continue the drilling program to validate the mineralized wireframes for engineering

works.

• Accelerate rehabilitation work and preparation for the drilling setup at level 785 to

validate the deep mining potential documented in the PEA 2023.

• Add a second drill and the required personnel to increase the drilling rate.

• Abcourt holds a certificate of authorization to process 950 tonnes of gold ore per day

in its processing plant, which is fully operational. Abcourt is currently studying the

possibility of undertaking contract machining for third parties.

Mohamed Haithem Bennia, Superintendent Geology at the Sleeping Giant mine,

comments: “We are very excited to see that our drilling results and the modeling and

optimization work of the stopes allow us to increase our mineral resources. We will continue

with enthusiasm, in collaboration with GoldMinds Geoservices Inc., to advance the work

required to support the engineering in the preparation of a prefeasibility study. The addition

of a second drill, as well as a night shift, will allow us to accelerate the validation of the

mineralized wireframes and to update the mineral potential.”

Quality Control Measures (QA/QC)

The drilling, core description and analysis preparation work was carried out under the

supervision of Mohamed Haithem Bennia, geo, Superintendent Geology, Qualified Person

according to Regulation 43-101.

The quality assurance and quality control protocols include insertion of blank, standard and

duplicate samples every 25 samples, in addition the laboratory adds its internal samples

control.

The half-cores were prepared at the Sleeping Giant mine’s in-house laboratory

according to industry standards.

To reduce the time taken to receive analysis results, part of the batch samples used in

the preparation of this press release was sent (pulp/reject material) to an external

laboratory (MSALABS laboratory in Val-d’Or) and the other part was analyzed at the

Sleeping Giant mine’s in-house laboratory.

The samples analyzed in the internal laboratory were carried out by fire analysis (A.A.) with

atomic absorption finishing. Samples with a grade greater than 10 g/t Au were reanalyzed

by fire assay with finish by gravimetry.

To validate the quality of the internal laboratory analysis, a batch of pulp samples were

reanalyzed by Techni-Lab S.G.B. Abitibi inc. division of ActLabs which is an accredited

external laboratory, registered to ISO 9001 and ISO/IEC 17025 certified CCN (lab707),

MELCC (lab375) located in Sainte-Germaine-Boulé, Quebec.

The audits show a high degree of correlation with internal laboratory results.

The samples sent externally were analyzed by the MSALABS laboratory in Val-d’Or,

Quebec, using the Photon AssayTM method. MSA operates numerous laboratories around

the world and maintains ISO-17025 accreditation for many metal determination methods.

MSA is an ISO-17025 accredited laboratory for the photonic analysis method.

The Qualified Persons have not completed sufficient work to verify the historical information

on the Property. However, the Qualified Persons believe that drilling and analytical results

were completed to industry standard practices according to the previous technical reports.

Qualified Persons

Mohamed Haithem Bennia, P.Geo., Superintendent Geology at the Sleeping Giant Mine,

wrote, collected, verified and approved the technical information contained in this press

release.

Merouane Rachidi, P.Geo., Ph.D., (Independent Qualified Person) Project Geologist at

GoldMinds Geoservices Inc., performed the resource modeling and estimation of Zone 20

West and verified and approved the technical information contained in this press release.

Pascal Hamelin, P.Eng., President and CEO of the Corporation, verified and approved the

technical information contained in this press release.

Mr. Hamelin, Mr. Bennia and Mr. Rachidi are Qualified Persons under Regulation 43-101.

About Goldminds Geoservices Inc.

GoldMinds Geoservices Inc. is a consulting firm specializing in NI 43-101 technical reports,

mineral resource estimations, drilling programs management, exploration geology and

geotechnical studies. GoldMinds Geoservices Inc. has extensive experience in the

production of NI 43-101 technical reports.

About Abcourt Mines Inc.

Abcourt Mines Inc. is a Canadian gold exploration Corporation with properties strategically

located in northwestern Quebec, Canada. Abcourt 100% owns the Sleeping Giant mill and

mine where it concentrates its activities. The Sleeping Giant mine has a mining lease, as

well as environmental certificates of authorization to extract up to 950 tonnes per day from

its underground mine.

For more information about Abcourt Mines Inc., please visit our website and view our filings

under Abcourt's profile on www.sedarplus.ca.

Pascal Hamelin Dany Cenac Robert, Investor Relations

President and Chief Executive Officer Reseau ProMarket Inc.,

T : (819) 768-2857 T : (514) 722-2276 ext.: 456

Email : [email protected] Email : [email protected]

FORWARD-LOOKING STATEMENTS

Certain information contained in this news release may constitute "forward-looking information" within the

meaning of Canadian securities legislation. Generally, forward-looking information can be identified by using

forward-looking terminology, such as "plans", "aims", "expects", "projects", "intends", "anticipates",

"estimates", "could", "should", "likely", or variations of such words and phrases or statements specifying that

certain acts, events or results "may", "should", "will" or "be achieved" or other similar expressions. Forward-

looking statements are based on Abcourt's estimates and are subject to known and unknown risks,

uncertainties and other factors that may cause Abcourt's actual results, level of activity, performance or

achievements to be materially different from those expressed or implied by such forward-looking statements

or information. Forward-looking statements are subject to business, economic and uncertainties and other

factors that could cause actual results to differ materially from these forward-looking statements, including

the relevant assumptions and risk factors set forth in Abcourt's public filings, which are available on SEDAR

at www.sedarplus.ca. There can be no assurance that these statements will prove to be accurate, as actual

results and future events could differ materially from those anticipated in such statements. Accordingly,

readers should not place undue reliance on forward-looking statements and forward-looking information.

Although Abcourt believes that the assumptions and factors used in preparing the forward-looking statements

are reasonable, undue reliance should not be placed on such statements. Except as required by applicable

securities laws, Abcourt disclaims any intention or obligation to update or revise any such forward-looking

statements or information, whether as a result of new information, future events or otherwise.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies

of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.