Aton announces the first results and completion of the resource infill RC drilling programme at Hamama West
FOR IMMEDIATE RELEASE
Aton announces the first results and completion of the
resource infill RC drilling programme at Hamama West
Vancouver, British Columbia, August 26, 2022: Aton Resources Inc. (AAN: TSX-V) (“Aton” or the “Company")
is pleased to update investors on progress at its Hamama West gold-silver project, located in the Company’s
100% owned Abu Marawat Concession (“Abu Marawat” or the “Concession”), in the Eastern Desert of Egypt.
Highlights:
• The Hamama West RC infill drilling programme was completed on August 24, 2022, with a total of
6,620m drilled, including 5 holes at the West Garida prospect;
• Assay results have been received for the first 35 holes, HAP-101 to HAP-135, to date;
• Significant intersections include 2.90 g/t Au, 68.9 g/t Ag and 3.71 g/t AuEq over a 37m interval from
surface (drill hole HAP-115), 2.87 g/t Au, 54.3 g/t Ag and 3.51 AuEq over a 22m interval from 1m
depth (hole HAP-110), and 1.43 g/t Au, 24.1 g/t Ag and 1.72 g/t AuEq over a 32m interval from 3m
depth (hole HAP-115).
“The RC resource infill drilling programme at Hamama West has now been completed on schedule, and we
are surely pleased with the initial results of the drilling that we have received so far ” said Tonno Vahk, Interim
CEO. “The results are in line with our expectations, and again confirm that the Hamama West oxide gold cap
will be an easily mineable body of oxide mineralisation outcropping at surface, and which metallurgical testing
has shown to be eminently treatable using heap leach processing technology. As soon as all the results have
been received they will be forwarded on to our consultants Cube Consulting, who will commence work on
revising the Hamama West mineral resource estimate. The development of the Hamama West starter open
pit and heap leach project on the outcropping oxides, as only the second commercial gold mining operation in
Egypt, will be a huge step forwards for the mining and mineral exploration sector in Egypt, the Egyptian Mineral
Resources Authority, and of course for Aton, and for all our stakeholders.”
Hamama West RC drilling programme
The Hamama West project has an indicated resource of 137,000 ounces of gold equivalent (“AuEq”, gold and
silver combined), and an inferred resource of 341,000 ounces AuEq. The uppermost oxide and transitional
component of the Hamama West deposit (the “gold oxide cap”) comprises an inferred resource of 106,000
ounces AuEq (see news release dated January 24, 2017). Metallurgical testwork has indicated average gold
recoveries of 75.6% and 72.7% from oxide and transitional mineralisation types respectively (see news release
dated February 22, 2018), using standard heap leach processing technology. Aton plans to initially mine the
outcropping oxide gold cap of the deposit, which is mineralised directly from surface, as a low capex/opex
starter open pit mining operation, with a heap leach processing facility. The Hamama West oxides will provide
early cash flow, and will represent the first stage of phased mine development at the Abu Marawat Concession.
The reverse circulation percussion (“RC”) resource infill drilling programme at the Hamama West gold-silver
project (Figure 1) has now been completed, with the final hole, HAP-204, terminated on August 24, 2022. The
programme was desi gned by Aton, in conjunction with our mineral resource consultants, Cube Consulting
(Perth, Western Australia), to primarily test the oxide and transitional portion of the Hamama West mineral
resource estimate (“MRE”), with the specific objective of upgrading the confidence of the existing inferred
resource. A number of holes also tested the underlying sulphide resource, and a series of deeper holes w as
added at the end of the programme with a view to testing potential deeper sulphide mineralisation, and
increasing the overall MRE at Hamama West.
Figure 1: Geology plan of the Abu Marawat Concession, showing the location of the Hamama West project
Figure 2: Schematic geology of the Hamama – West Garida area
A total of 6,620m was drilled for the programme, predominantly at the Hamama West zone. 3 holes were
completed, for 297m , at the Western Carbonate zone, and 5 holes, for 390m , at the West Garida prospect
approximately 3km east of Hamama West (Figure 2), with the remaining 5,933m drilled at Hamama West.
Drill holes were laid out using handheld GPS, with all collars to be surveyed by total station within the coming
week. Drill holes were down hole surveyed at appropriate intervals using a Champ Gyro TM north-seeking
gyroscopic survey tool. Collar details of holes HAP-101 to HAP-135 are provided in Table 1 below:
Hole ID
Collar co-ordinates 1
Dip 2 Grid
azimuth 2
EOH
depth (m) Comments
X Y Z
HAP-101 534289 2913870 506 -60 187 120
HAP-102 534316 2913876 516 -50 180 100
HAP-103 534339 2913865 510 -55 180 110
HAP-104 534358 2913840 507 -55 180 100
HAP-105 534344 2913832 507 -55 180 75
HAP-106 534319 2913832 507 -55 180 70
HAP-107 534280 2913818 527 -75 180 95
HAP-108 534280 2913818 527 -55 180 80
HAP-109 534281 2913784 528 -50 180 58
HAP-110 534286 2913766 528 -65 180 25
HAP-111 534321 2913750 520 -90 n/a 25
HAP-111a 534317 2913752 520 -90 n/a 4 Re-drill of top 4m of HAP-111
HAP-112 534341 2913749 522 -55 180 25
HAP-113 534342 2913722 524 -55 180 20
HAP-114 534340 2913765 531 -55 180 35
HAP-115 534338 2913785 528 -55 180 45
HAP-116 534400 2913757 535 -90 n/a 20
HAP-117 534400 2913772 522 -90 n/a 40
HAP-118 534429 2913771 534 -90 n/a 20
HAP-118a 534426 2913771 534 -90 n/a 4 Re-drill of top 4m of HAP-118
HAP-119 534458 2913787 530 -90 n/a 35
HAP-120 534459 2913805 527 -55 180 40
HAP-121 534490 2913807 530 -90 0 50
HAP-122 534490 2913807 530 -55 180 40
HAP-123 534524 2913792 535 -55 180 25
HAP-124 534496 2913771 535 -90 n/a 30
HAP-125 534530 2913771 532 -90 n/a 20
HAP-126 534563 2913783 530 -55 180 40
HAP-127 534563 2913783 530 -90 n/a 50
HAP-128 534601 2913789 534 -55 180 40
HAP-129 534601 2913789 534 -90 n/a 50
HAP-130 534335 2913809 518 -55 180 60
HAP-131 534361 2913806 516 -55 180 70
HAP-132 534405 2913820 518 -55 188 70
HAP-133 534430 2913821 521 -55 180 60
HAP-134 534461 2913829 518 -55 180 50
HAP-135 534488 2913840 517 -50 180 60
Notes:
1) Collar co-ordinates surveyed by handheld Garmin GPS
2) Collar surveys of drill holes undertaken at c. 3-6m depth, using a Champ Gyro north-seeking gyroscopic survey tool
3) All co-ordinates are UTM (WGS84) Zone 36R
Table 1: Collar details of RC percussion holes HAP-101 to HAP-135
Figure 3: Hamama West RC drilling programme – drill hole collar plan (red: holes reporting, blue: oxide/transitional holes completed, but yet to be reported)
Results
Selected significant intersections from the first 35 holes are shown below in Table 2, and full results from all
holes are provided in Appendix A.
Hole ID
Intersection (m) 1
Au (g/t) Ag (g/t) AuEq 2
(g/t) Comments
From To Interval
HAP-101 68 96 28 0.76 53.33 1.39 Sulphide mineralisation
HAP-107 40 56 16 1.22 54.46 1.86 Oxide / sulphide mineralisation
HAP-108 35 52 17 0.94 30.77 1.30 Oxide / sulphide mineralisation
HAP-109 3 35 32 1.43 24.09 1.72 Oxide mineralisation from surface
HAP-110 1 23 22 2.87 54.27 3.51 Oxide mineralisation from surface
HAP-111 0 10 10 1.80 132.1 3.36 Oxide mineralisation from surface
HAP-112 0 5 5 5.55 156.6 7.40 Oxide mineralisation from surface
HAP-114 0 20 20 1.90 42.40 2.40 Oxide mineralisation from surface
HAP-115 0 37 37 2.90 68.94 3.71 Oxide mineralisation from surface
HAP-116 0 7 7 3.07 37.07 3.51 Oxide mineralisation from surface
HAP-117 0 11 11 2.35 40.39 2.82 Oxide mineralisation from surface
HAP-118 0 10 10 1.25 29.35 1.59 Oxide mineralisation from surface
HAP-119 0 16 16 1.86 27.57 2.18 Oxide mineralisation from surface
HAP-120 1 31 30 1.06 21.93 1.32 Oxide mineralisation from surface
HAP-130 0 35 35 0.99 29.41 1.34 Oxide mineralisation from surface
HAP-131 17 34 17 1.26 98.35 2.42 Transitional mineralisation
and 41 51 10 0.95 17.41 1.15 Sulphide mineralisation
Notes:
1) Intersections calculated at a nominal cutoff grade of 0.5 g/t AuEq in runs of continuous mineralisation
2) Gold equivalent, AuEq, is calculated at a ratio of 85:1 Au:Ag (ie. 1 g/t Au = 85 g/t Ag)
Table 2: Selected mineralised intersections from RC percussion holes HAP-101 to HAP-135
Sampling and analytical procedures
The RC holes were drilled at 140mm diameter, and the bulk percussion chip samples were collected directly
into pre-written large plastic bags from the cyclone every metre, numbered with the hole number and hole
depths, and laid out sequentially at the drill site. Between each metre of drilling the cyclone and top box were
cleaned out with compressed air. The bags were then moved to a logging and storage area where the chips
were logged by Aton geologist s. The bulk 1m samples were weighed, and subsequently riffle split through a
3-tier splitter onsite by Aton field staff to produce an approximately 1/8 split, which was collected in cloth bags,
numbered and tagged with the hole number and depth. The splitter was cleaned with compressed air between
each sample. The reject material from this initial bulk split was re- bagged, labelled and tagged, and the bulk
reject samples will be stored and retained on site at Hamama. A representative sample of each metre was
washed, stored in marked plastic chip trays, each containing 20m of samples, photographed, and retained
onsite as a permanent record of the drill hole.
All the 1m split samples were weighed again, and the samples were riffle split onsite at the Hamama sample
preparation facility, typically a further 3- 4 times using a smaller lab splitter, to produce a nominal c. 250-500g
sample split for dispatch to the assay laboratory. Again the splitter was cleaned with compressed air between
each sample. The laboratory splits were allocated new sample numbers.
QAQC samples are inserted into the sample stream at a rate of approximately 1 certified reference material
(or “standard” sample) every 30 samples, 1 blank sample every 15 samples, and 1 field duplicate split sample
every 15 samples.
The c. 250-500g split samples were shipped to ALS Minerals sample preparation laboratory at Marsa Alam,
Egypt, where they were pulverised to a size fraction of better than 85% passing 75 microns. From this
pulverised material a further sub-sample was split off with a nominal c. 50g size, which was shipped on to ALS
Minerals at Rosia Montana, Romania for analysis.
Samples were analysed for gold by fire assay with an atomic absorption spectroscopy (“AAS”) finish (analytical
code Au-AA23), and for silver using an aqua regia digest followed by an AAS finish (analytical code Ag-AA45).
Any high grade gold samples (Au >10 g/t) were re-analysed using analytical code Au-GRA21 (also fire assay,
with a gravimetric finish). High grade Ag samples (Ag >100 g/t) were re-analysed using the ore grade technique
Ag-AA46 (also an aqua regia digest followed by an AAS finish).
About Aton Resources Inc.
Aton Resources Inc. (AAN: TSX-V) is focused on its 100%
owned Abu Marawat Concession (“Abu Marawat”),
located in Egypt’s Arabian -Nubian Shield, approximately
200 km north of Centamin’s world-class Sukari gold mine.
Aton has identified numerous gold and base metal
exploration targets at Abu Marawat, including the
Hamama deposit in the west, the Abu Marawat deposit in
the northeast, and the advanced Rodruin exploration
prospect in the south of the Concession. Two historic
British gold mines are also located on the Concession at
Sir Bakis and Semna. Aton has identified several distinct
geological trends within Abu Marawat, which display
potential for the development of a variety of styles of
precious and base metal mineralisation. Abu Marawat is
447.7 km2 in size and is located in an area of excellent
infrastructure; a four -lane highway, a 220kV power line,
and a water pipeline are in close proximity, as are the
international airports at Hurghada and Luxor.
Qualified person
The technical information contained in this News Release
was prepared by Javier Orduña BSc (hons), MSc, MCSM,
DIC, MAIG, SEG(M), Exploration Manager of Aton
Resources Inc. Mr. Orduña is a qualified person (QP) under
National Instrument 43-101 Standards of Disclosure for
Mineral Projects.
For further information regarding Aton Resources Inc.,
please visit us at www.atonresources.com or contact:
TONNO VAHK
Interim CEO
Tel: +1 604 318 0390
Email: [email protected]
Note Regarding Forward-Looking Statements
Some of the statements contained in this release are forward-looking statements. Since forward-looking statements
address future events and conditions; by their very nature they involve inherent risks and uncertainties. Actual results
in each case could differ materially from those currently anticipated in such statements.
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Appendix A
Hole ID
Intersection (m) 1
Au (g/t) Ag (g/t) AuEq 2
(g/t) Comments
From To Interval
HAP-101 68 96 28 0.76 53.33 1.39
HAP-102 - - - - - - NSA, 2m @ 0.18 g/t Au (on
hangingwall contact)
HAP-103 87 91 4 0.55 7.38 0.63
HAP-104 - - - - - - NSA, 1m @ 0.23 g/t Au (on
hangingwall contact)
HAP-105 38 40 2 1.21 38.80 1.66
and 59 61 2 0.67 12.30 0.82
HAP-106 52 56 4 0.83 12.40 0.97
HAP-107 40 56 16 1.22 54.46 1.86
HAP-108 35 52 17 0.94 30.77 1.30
HAP-109 3 35 32 1.43 24.09 1.72
HAP-110 1 23 22 2.87 54.27 3.51
HAP-111 0 10 10 1.80 132.1 3.36
HAP-112 0 5 5 5.55 156.6 7.40
HAP-113 - - - - - - Collared in hangingwall, not
mineralised
HAP-114 0 20 20 1.90 42.40 2.40
HAP-115 0 37 37 2.90 68.94 3.71
HAP-116 0 7 7 3.07 37.07 3.51
HAP-117 0 11 11 2.35 40.39 2.82
HAP-118 0 10 10 1.25 29.35 1.59
HAP-119 0 16 16 1.86 27.57 2.18
HAP-120 1 31 30 1.06 21.93 1.32
HAP-121 - - - - - - No mineralisation
HAP-122 16 27 11 1.12 24.02 1.40
HAP-123 0 19 19 0.57 17.06 0.77
HAP-124 0 4 4 1.33 93.70 2.43
HAP-125 1 7 6 1.27 85.50 2.28 0-1m: NSR
HAP-126 - - - - - - No mineralisation - rhyolite dyke
HAP-127 0 3 3 0.99 15.80 1.17 Rhyolite dyke from 3m
HAP-128 13 16 3 0.61 3.77 0.65 0-13m: rhyolite dyke
HAP-129 - - - - - - Rhyolite dyke from surface, 0-1m:
1.19 g/t Au
HAP-130 0 35 35 0.99 29.41 1.34
HAP-131 17 34 17 1.26 98.35 2.42
and 41 51 10 0.95 17.41 1.15
HAP-132 - - - - - - NSA > 0.79 g/t Au
HAP-133 - - - - - - NSA > 0.69 g/t Au (possibly did
not intersect hangingwall?)
HAP-134 - - - - - - NSA (possibly did not intersect
hangingwall?)
HAP-135 - - - - - - NSA (possibly did not intersect
hangingwall?)
Notes:
1) Intersections calculated at a nominal cutoff grade of 0.5 g/t AuEq in runs of continuous mineralisation
2) Gold equivalent, AuEq, is calculated at a ratio of 85:1 Au:Ag (ie. 1 g/t Au = 85 g/t Ag)