Regency Silver Extends breccia target southwards and up-dip towards Dios Padre Silver Mine in 225m step out from previous drilling. Intercepts broad zones of sulphide-specularite bearing breccia across 240m.
{03804552;2}
FOR IMMEDIATE RELEASE
NEWS RELEASE
Regency Silver Extends breccia target southwards and up-dip towards Dios Padre Silver Mine
in 225m step out from previous drilling.
Intercepts broad zones of sulphide-specularite bearing breccia across 240m.
Vancouver, BC – January 8, 2026 – Regency Silver Corp. (“Regency Silver” or the “Company”,
TSXV-RSMX and OTCQB -RSMXF) is pleased to announce that hole REG 25 -26 has intersected
sulphide-specularite supported breccia in multiple zones across a broad, non-continuous ~240m
interval (Figure 1). The breccia zones are controlled by a series of Quartz-Feldspar porphyries and
range in size from 5 -50m. The breccias are similar in nature to the breccia hosting Au -Cu-Ag
mineralization in REG-22-01, REG 23-21 and REG 23 -14 as well as similar Ag -dominant breccias
at its wholly owned Dios Padre silver mine project, Sonora, Mexico . The intersection is ~150m
down-dip below the historic Dios Padre silver mine workings and ~225m up dip from drill hole
REG-25-25. REG 23-21 yielded 38m of 7.36 g/t gold, REG-22-01 yielded 35.8 metres of 6.84 g/t
gold, 0.88% copper and 21.82 g/t silver, and REG 23-14 yielded 29.4 m of 6.32 g/t gold.
Hole REG 25-26 was the final hole of the 2025 portion of Regency’s ongoing drill program which
began on October 10, 2025. Hole REG 25-26 is the fifth hole of the program and was successful
in finding an extension of the deep breccia at shallower levels up dip toward the historic Dios
Padre silver mine.
“Drill Hole REG 25 -26 is a very significant development for the Dios Padre project. We have
hypothesized that the deeper, porphyry controlled breccia should extend and continue to the old
mine site at surface. This breccia intersection helps to validate our hypothesis in obser ving
multiple porphyry dykes with adjacent sulphide-specularite supported breccias almost exactly in-
between the deep breccia and the mine site ”said Mike Tucker, Director and Head Geologist.
Five holes totaling 3,723m have been completed since drilling resumed in October. The location
and traces of the holes can be found on the plan map in Figure 2. The traces of the holes relative
to the projected trace of the mineralized breccia can be seen on the 3D long section in Figure 3.
Close up photos of stronger sections of mineralization from REG-25-26 are shown in Figure 1. We
currently do not have analytical results for the intervals from the 2025 drill program, so there is
no assurance when comparing the potential assay quality of these intersections to REG -22-01,
REG-23-14 and REG 23-21. However, in terms of geology, alteration, mineral species and
{03804552;2} 2
abundance, the zones appear to compare favorably. For comparative purposes, mineralized
intervals and their corresponding assays can be found in press releases dated February 23, 2023
and November 2, 2023.
As observed in the deeper breccia – the primary controlling factor appears to be the presence of
Quartz-Felspar porphyries. Hole 26 has an abundance of smaller porphyry intersections with
adjacent breccias. As these control/mark the structures and the mineralization, we are
endeavoring to map them in detail to allow for more efficient targeting on the project as we
advance.
Technical Information
The technical information contained in this news release has been reviewed by Michael Tucker,
P. Geo, who is recognized as a Qualified Person under the guidelines of National Instrument 43 -
101. Mr. Tucker is also a director of the Company and for that reason is not considered
independent. Mr. Tucker has read and approved the technical contents of this news release.
QA/QC
Once the drill core was received from the drill site, individual samples were determined, logged
for geological attributes, sawn in half, labelled, and bagged for assay submittal. The remaining
drill core was then stored at a secure site in the buildings surrounding the old milling site for the
Dios Padre silver mine. The Company inserted quality control samples at regular intervals within
the sample stream which included blanks, preparation duplicates, and standard reference
materials with all sample shipm ents intended to monitor laboratory performance. Sample
shipment was conducted under a chain of custody procedure.
Drill core samples were submitted to ALS Global’s analytical facility in Hermosillo, Mexico for
preparation and analysis. Sample preparation included drying and weighing the samples,
crushing the entire sample, and pulverizing 250 grams (“g”). Analysis for gold was by method Au-
AA23: 30g fire assay fusion with atomic absorption (AAS) finish with a lower limit of 0.005 ppm
and upper limit of 10 ppm. Gold assays greater than 10ppm are automatically analyzed by
method Au-GRA21: 30g fire assay fusion with a gra vimetric fusion. Analysis for silver and base
metals was by method ME-ICP61m: 0.75g is dissolved via four acid digest and analyzed with ICP-
AES finish. Detection limits for Ag are 0.5-100ppm, 1-10 000ppm for Cu, 2-10 000ppm for Zn and
2-10 000ppm for Pb. S ilver assays greater than 100ppm are automatically analyzed by method
Ag-OG62: 0.4g sample by Ag by HF-HNO3-HClO4 digestion with HCl leach, ICP-AES or AAS finish.
Samples with Ag>1500ppm are automatically analyzed by Ag-GRA21: 30g sample Ag by fire assay
and gravimetric finish. Cu, Pb and Zn >10 000ppm are automatically analyzed by Cu -OG62, Pb-
OG62 and Zn-OG62 respectively: 0.4g sample by Four acid digestion and ICP finish.
ALS Global is ISO 9001 and ISO/IEC 17025 certified and all analytical methods include quality
control materials at set frequencies with established data acceptance criteria. Parameters for
{03804552;2} 3
ALS' internal and Regency Silver’s external blind quality control samples were acceptable for the
analyses returned.
ABOUT REGENCY SILVER CORP.
Regency Silver Corp. is a Canadian resource company exploring for high grade gold, copper, and
silver in Mexico. Regency Silver is led by a team of experienced professionals with expertise in
both exploration and production. Regency’s flagship project is the high-grade Dios Padre project
in Sonora, Mexico where Regency has made a large, high grade, gold -copper-silver discovery
which appears to be a large magmatic-hydrothermal system which widens at depth. Drill results
have included 38 metres of 7.36 g/t go ld in hole REG 23 -21, 36 metres of 6.84 g/t gold , 0.88%
copper and 21.8 g/t silver in hole REG 22-01, and 29.4 m of 6.32 g/t gold in hole REG 23-14.
Contact Information
Regency Silver Corp.
Bruce Bragagnolo, Chief Executive Officer
(604) 417-9517
Email: [email protected]
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in
the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of
this release.
Cautionary Note Regarding Forward -Looking Statements: This news release includes certain forward -
looking statements and forward -looking information (together, “forward -looking statements”). All
statements other than statements of historical fact included in this release, including, without limitation,
statements regarding the Dios Padre Project by the Company. There can be no assurance that such
statements will prove to be accurate and actual results and future events may vary from those anticipated
in such statements. Important risk factors that could cause actual results to differ ma terially from the
Company's plans or expectations include the risk that regulatory changes, fundraising, and risk associated
with mineral exploration, including the risk that actual results of exploration will be different from those
expected by management. The forward-looking statements in this news release were developed based on
the expectations of management that conditions will be satisfied, required fundraising will be completed
and the other risks described above will not materialize. The Company expressly disclaims any intention or
obligation to update or revise any forward -looking statements whether as a resu lt of new information,
future events or otherwise, except as otherwise required by applicable securities legislation.
{03804552;2} 4
Figure 1: Selection of photographs of the sulphide-specularite infilled breccias from REG-25-26.
{03804552;2}
Figure 2: Plan map with hole traces for current and historic holes. Dios Padre deep breccia in red is projected vertically to surface.
Red trace on REG-25-26 is the vertical projection of the non-continuous zone of sulphide-specularite breccia.
{03804552;2} 6
Figure 3: 3D long section for the Dios Padre breccia zone (projected) and the drill hole traces with block model and historic mine
workings of historic silver mine.