Spanish Mountain Gold Announces 9-10,000 Metre Drill Program
Spanish Mountain Gold Announces 9-10,000 Metre Drill Program
VANCOUVER, British Columbia--(BUSINESS WIRE)--September 12, 2025--Spanish
Mountain Gold Ltd. (“Spanish Mountain” or the “Company”) (TSX-V: SPA; FSE: S3Y;
OTCQB: SPAUF) is pleased to announce that it has contracted Hardrock Diamond Drilling Ltd.
(“HRDD”) for its upcoming drilling program at its Spanish Mountain Gold (“SMG”) Project,
which is located in the Cariboo Gold Corridor near Likely, British Columbia, Canada.
Drill program objectives are:
1. Extend near surface, higher-grade gold mineralization in five key priority areas: Main
deposit, Phoenix deposit, K-zone, Outcropping Tuff (“OT”) target, and the A12 target
(Figure 1).
2. Collect drill hole sample material from the Phoenix deposit for ore sorting metallurgical
studies looking to reject waste material and increase the gold content of mineralization
entering the Process Plant.
3. Derisk infrastructure locations identified in the 2025 PEA (see July 3, 2025 news release)
through drilling of high priority exploration targets to inform future engineering studies.
The diamond drill program (approximately 9-10,000 metres in 27 HQ3-sized drill holes) ranging
in depth from 250 m to 600 metres is planned to commence in Q3 2025 and is expected to be
completed in Q1 2026. Drilling will utilize downhole tools for oriented drill core and split tube
core barrels for structural measurements and enhanced core recovery, respectively.
The Company’s development strategy is focused on optimizing, derisking and advancing the
SMG Project towards a build decision in 2027. In July 2025, the Company published a new
Mineral Resource Estimate (“MRE”) and Preliminary Economic Assessment (“PEA”) (see July
3, 2025 news release), which outlined several opportunities for follow-up drilling within the
Main and Phoenix deposits and nearby targets.
For the upcoming drill program, work will be targeting extensions where higher-grade gold
mineralization has been intersected in the near-surface environment, leveraging understanding
gained in the Fall 2024 and Winter 2024-25 drilling programs. An exploration drill program in
2024 (5,590 metres) was successfully and safely completed in September 2024 and a 10,001
metre exploration drill program was completed in late May 2025.
The Technical Team continues to focus on understanding the controls to higher-grade gold
mineralization incorporating new and historic geological, structural, geochemical and
geophysical studies. This work has greatly aided targeting and continues to confirm the favorable
lithological and structural controls to mineralization in the Main and Phoenix deposits (see
Figure 1), and expansion potential outside the current MRE. High priority targets outside of the
MRE include the OT and A12 targets, which have seen limited historical drilling, however, the
prospectivity of these two targets is exemplified by this past winter’s drill hole, 25-DH-1275 at
OT that intersected 62.20 metres grading 0.60 g/t gold, including 5.04 metres grading 4.69 g/t
gold, which also had a subset of 1.95 metres grading 9.72 g/t gold (see April 1, 2025 news
release). Further drilling is needed in these important targets.
High Priority Targets
Main Deposit (Section B-B’)
The area around drill holes 25-DH-1281 and 25-DH-1282 is a key element to targeting higher-
grade gold mineralization in the Main deposit, and especially important to follow-up, since none
of the winter 2025 drill holes in the Main deposit were included in the 2025 MRE (see April 21,
2025 news release). Until 2025, drilling had not focused on what is now considered the preferred
drilling direction of azimuth 120⁰, which resulted in significantly higher-grade intercepts than the
grade of the MRE of the Main deposit. Drill hole 25-DH-1281 intersected 123.00 metres grading
1.08 g/t gold and drill hole 25-DH-1282 intersected 211.90 metres grading 0.36 g/t gold,
including 100.30 metres grading 0.52 g/t gold that included an interval of 16.00 metres grading
1.43 g/t gold. This highlights the opportunity for extending this zone of higher-grade
mineralization with additional step-out holes and identifying new zones of higher-grade
mineralization using the preferred drilling direction.
K-zone (Section C-C’)
The K-zone, which is located in the southwest portion of the Main deposit will be a high priority
target in the planned drill program. Drill hole 25-DH-1286 intersected 139.00 metres grading
4.18 g/t gold, including 0.75 metres grading 719.26 g/t gold in the winter 2025 drill program (see
April 24, 2025 news release). This intercept is the highest recorded on the SMG Project and step-
out drill holes in the upcoming program will look to further develop information on the
orientation and extent of these important near-surface, high-grade vein structures. It is important
to note that all winter 2025 drill holes from K-zone were not included in the 2025 MRE, and
therefore, the high-grade intercept had no impact on the block model.
Phoenix deposit (Section A-A’)
The Phoenix deposit was the focus of drill programs in 2024 and 2025, which outlined a large,
near-surface gold endowment in its inaugural MRE (see July 3, 2025 news release). Drilling in
the upcoming program will be focused along the main north-northwest trending Evelyn Fault
that transects most of the favorable, mineralized trend over a distance of 1.4 km and has yield
higher-grade gold results such as drill hole 25-CCR-062, which intersected 62.00 metres grading
1.47 g/t gold, including 4.00 metres grading 17.28 g/t gold (see June 2, 2025 news release).
Other notable intercepts at the Phoenix deposit include drill hole 25-CCR-056, which intersected
116 metres, grading 0.40 g/t, including 13.12 metres, grading 1.27 g/t gold (see June 2, 2025
news release).
North-northwest trending faults that appear to be a major control to mineralization at the Main
deposit may also be important controls to mineralization at the Phoenix deposit.
A12 and OT Targets (Sections C-C’, and A-A’ and B-B’, respectively)
The A12 target is located along strike and west of the Main deposit MRE and is coincident with
a strong gold-in-soil and geophysical anomaly. Drill holes in the upcoming program are
primarily condemnation holes to derisk the surface infrastructure footprint for the process plant
and dry stack tailings management facility as identified in the 2025 PEA. However, the favorable
soil geochemistry and geophysics immediately west of the open pit may be associated with
extensions to the Main deposit and provide a near-open pit opportunity that could have a
significant positive impact to the SMG Project.
The OT target is a recent discovery based on drilling a geological target in drill hole 25-DH-1275
that intersected 62.20 metres grading 0.60 g/t gold including a smaller intercept of 5.04 m
grading 4.69 g/t gold (see April 21, 2025 news release). The hole was collared 1.35 km
northwest of the pit constraining the 2025 MRE and is a high priority target for the upcoming
drill program.
2025 Summer Surface Exploration Program
The Technical Team completed a limited summer exploration program in 2025 that had the
objective to further delineate and refine high-priority targets that will be the focus of the
upcoming drill program. Work included geological mapping, geochemical sampling of rocks,
soils, and colluvial material in the K-zone, OT target, and A12 target. The total of samples (over
70 samples) been remitted for analysis and results are pending. Sample locations are displayed in
Figure 3.
Qualified Person
Julian Manco, M.Sc., P.Geo., Director of Exploration with Spanish Mountain Gold, is the
Qualified Person as defined under National Instrument 43-101 who has reviewed and has
approved the contents of this news release.
Hardrock Diamond Drilling Ltd.
Since its inception, in 2004, HRDD has prioritized steady growth and has evolved into a full-
scale drilling company. Equipped with all the necessary heavy machinery and mechanical
prowess necessary for diverse coring projects, the company has established itself as one known
for quality and reliability. The founding members of the team remain in charge today, ensuring
top-notch expertise on projects. For HRDD, excellence requires maintaining safety, ensuring
reliability, optimizing costs, and upholding environmental responsibility. HRDD stated mission
is to “Build strong, long-lasting relationships with clients, to prove efficient & cost-effective
drilling services, to offer an experienced and loyal team, to exceed our client’s expectations and
to continue to improve.”
About the Company
Spanish Mountain Gold Ltd. is focused on advancing its 100%-owned Spanish Mountain Gold
Project (Project) towards construction of the next gold mine in the Cariboo Gold Corridor,
British Columbia. On August 18, 2025, the Company filed an NI 43-101 Technical Report on
SEDAR+ that sets out the Project’s de-risked and optimized Preliminary Economic Assessment
(PEA), with an updated Mineral Resource Estimate (MRE). We will continue to advance the
Project to position the Company to make a construction decision in 2027. We are striving to be a
leader in community and Indigenous relations by leveraging technology and innovation to build
the 'greenest' gold mine in Canada. The Relentless Pursuit for Better Gold means seeking new
ways to achieve optimal financial outcomes that are safer, minimize environmental impact and
create meaningful sustainability for communities. Details on the Company are available on
www.sedarplus.ca and on the Company's website: www.spanishmountaingold.com.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is
defined in the policies of the TSX Venture Exchange) accepts responsibility for the
adequacy or accuracy of this release.
FORWARD-LOOKING INFORMATION:
The Company's forward-looking information is based on the assumptions, beliefs, expectations,
and opinions of management as of the date of this press release and include but are not limited
to, information with respect to, the timing to make a construction decision for the Project.
Certain of the statements and information in this press release constitute "forward-looking
information". Any statements or information that express or involve discussions with respect to
predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or
performance (often, but not always, using words or phrases such as "expects", "anticipates",
"believes", "plans", "estimates", "intends", "targets", "goals", "forecasts", "objectives",
"potential" or variations thereof or stating that certain actions, events or results "may", "could",
"would", "might" or "will" be taken, occur or be achieved, or the negative of any of these terms
and similar expressions) are not statements of historical fact and may be considered forward-
looking information. The Company's forward-looking information is based on the assumptions,
beliefs, expectations and opinions of management as of the date of this press release and include
but are not limited to information with respect to, the potential to extend mineralization within
the near-surface environment; the potential to expand resources and to find higher-grade
mineralization at depth; the timing, size and budget of a drill program, and the results thereof.
Other than as required by applicable securities laws, the Company does not assume any
obligation to update forward-looking information if circumstances or management's
assumptions, beliefs, expectations or opinions should change, or changes in any other events
affecting such statements or information. For the reasons set forth above, investors should not
place undue reliance on forward-looking information.
Contacts
For more information, contact:
Peter Mah, President, CEO, and Director
+1 (604) 601-3651