Musk Metals Identifies and Outlines 48 Potential Pegmatite Dykes at Pontax South Lithium Property in James BAY, Quebec
MUSK METALS IDENTIFIES AND OUTLINES 48 POTENTIAL PEGMATITE DYKES AT PONTAX
SOUTH LITHIUM PROPERTY IN JAMES BAY, QUEBEC
November 28, 2023, VANCOUVER, BC – Musk Metals Corp. (“Musk Metals” or the “Company”) (CSE:
MUSK) (OTC: EMSKF) (FSE: 1I30) is pleased to announce that approximately 80% of the remote sensing work
is now completed at Pontax South Lithium Property, strategically located in James Bay, Quebec.
Description of Pontax South Property Regional Setting
The Pontax South property consists of 105 claims covering 5,603 hectares (56 km2) and immediately adjacent to
the south to Li-Ft Power Ltd.’s Pontax project which contains the most extensive Lithium anomaly within Li-Ft’s
Quebec portfolio. The Pontax South Property is also 60 km southwest of Stria Lithium’s Pontax project and 90 km
southwest of Brunswick Exploration Inc.’s Anatacau West project.
The Causabiscau Shear Zone transects the Pontax South property over 16 km and another regional Shear Zone,
oriented E-W, crosscuts the property over 6 km. Many Lithium deposits and occurrences are closely and spatially
associated to shear zones, evidencing entrapment, and tend to form at or near the contact of mafic, ultramafic or
amphibolite rocks which are reported at Pontax South.
Figure 1: Pontax South Property
Satellite Imagery Study Results
The remote sensing work is expected to be completed by end of November 2023 at Pontax South Lithium Property.
Already, a total of 48 potential pegmatite dykes were identified and outlined, appearing as dome shaped linear features
with positive relief. A sharp contrast with surrounding host rocks can also be observed and all potential dykes are
oriented northeast, parallel or nearly parallel to the Causabiscau Shear Zone.
There are 7 potential pegmatite dykes’ occurrences which are characterized by their length and width as follows:
In addition, there are 3 isolated potential pegmatite dykes: A dyke 925 metres long and 95 metres wide that could be
extended for another 720 metres to 1 645 metres should these 2 dykes be connected as they are separated by
overburden by roughly 100 metres. Another dyke is 745 m long by 80 metres wide that could also be extended to
1 305 metres. Results are as follows:
The information on these dykes will be transferred to a GIS system and a series of maps at scale 1:5 ,000 will be
generated. Precise satellite image interpreted pegmatites will be correlated with existing data for generating targeted
areas that will be followed up on the field in the upcoming pegmatite sampling program in the summer of 2024.
Number of dykes From Up to From Up to Length Width
metres metres metres metres metres metres
Dyke Swarm #1 11 120 490 15 45 780 430
Dyke Swarm #2 10 110 645 15 60 1 950 225
Dyke Swarm #3 7 150 430 20 50 835 650
Dyke Swarm #4 6 190 460 15 45 1 100 390
Length Width Swarm Dyke Area
Number of dykes From Up to From Up to
metres metres metres metres
Dyke #1 2 925 1 645 65 85
Dyke# 2 2 745 1305 60 80
Dyke #3 1 650 65
Length Width
The remote sensing work will be completed by end of November 2023 for Pontax South and will consist of
establishing spectral signatures for direct identification of lithium -bearing minerals that have distinctive emission
bands in the thermal spectrum. Lit hium-bearing minerals, such as spodumene, are difficult to identify visually and
to distinguish from common rock forming silicate minerals on the field.
The Company was using Worldview satellites constellation with panchromatic data up to 31 cm in resolution and
multispectral data with 1.24 m resolution for this work. Algorithms will be applied on these images in order to unfold
pegmatites and/or swarms of pegmatites that can take the shape of flat-lying or variably dipping dykes, pods, tabular
and lenticular-shaped bodies.
Next Steps
Musk Metals will carry out an airborne geophysical survey that will allow to link regional shear, faults, and
dilatational zones with satellite imagery targeted areas for outlining accurate pegmatite prospecting and potential
mineralization traps.
Qualified Person: Benoit Moreau (P.Eng) is a Qualified Person ("QP") as defined by National Instrument 43 -101
guidelines, and he has reviewed and approved the technical content of this news release.
About Musk Metals Corp.
Musk Metals is a publicly traded exploration company focused on the development of highly prospective, discovery-
stage mineral properties located in some of Canada's top mining jurisdictions. The Company’s properties are in the
“Allison Lake Batholith ” of Northwestern Ontario, and the “Chapais-Chibougamau”, “Abitibi”, and “James Bay”
regions of Quebec.
Make sure to follow the Company on Instagram and Facebook as well as subscribe for Company updates at
http://www.muskmetals.ca/
ON BEHALF OF THE BOARD
___Nader Vatanchi___
CEO & Director
For more information on Musk Metals, please contact:
Phone: 604-717-6605
Corporate e-mail: [email protected]
Website: www.muskmetals.ca
Corporate Address: 2905 – 700 West Georgia Street, Vancouver, BC, V7Y 1C6
FORWARD-LOOKING STATEMENTS
This news release contains forward-looking statements. All statements, other than statements of historical fact that
address activities, events, or developments that the Company believes, expects or anticipates will or may occur in the
future are forward-looking statements. Forward-looking statements in this news release include, but are not limited
to, statements regarding the intended use of proceeds of the Offering and other matters regarding the business plans
of the Company. The forward-looking statements reflect management’s current expectations based on information
currently available and are subject to a number of risks and uncertainties that may cause outcomes to differ materially
from those discussed in the forward-looking statements including that the Company may use the proceeds of the
Offering for purposes other than those disclosed in this news release; adverse market conditions; and other factors
beyond the control of the Company. Although the Company believes that the assumptions inherent in the forward-
looking statements are reasonable, forward-looking statements are not guarantees of future performance and,
accordingly, undue reliance should not be put on such statements due to their inherent uncertainty. Factors that could
cause actual results or events to differ materially from current expectations include general market conditions and
other factors beyond the control of the Company. The Company expressly disclaims any intention or obligation to
update or revise any forward-looking statements whether as a result of new information, future events or otherwise,
except as required by applicable law.
The Canadian Securities Exchange (operated by CNSX Markets Inc.) has neither approved nor disapproved of the
contents or accuracy of this press release.