IDEX Metals Receives USFS Approval & Provides Drilling Update for Freeze Project, Idaho
IDEX Metals Receives USFS Approval & Provides Drilling Update for
Freeze Project, Idaho
Vancouver, B.C. – August 25, 2025 – IDEX Metals Corp. (“IDEX” or the “Company”) (TSXV:
IDEX; OTCQB: IDXMF) is pleased to announce that the U.S. Forest Service (“USFS”) has
approved the Company’s Plan of Operations under a Categorial Exclusion (“CE”) for expanded
exploration at its 100% owned Freeze Project, located in Washington County, Idaho, USA.
With the CE approval in place, IDEX is now positioned to advance exploration on its highly
prospective USFS claims that form the western part of the Freeze project. Anticipated work
programs include diamond drilling, ground-based geophysics, and expanded mapping and
sampling programs, all aimed at advancing the Company’s magmatic-hydrothermal copper-gold
model. This approval also allows for future drilling at the CM prospect, a large previously untested
target that will complement ongoing drilling at the Kismet area.
Clayton Fisher, CEO of IDEX Metals, commented: “We’re really pleased to have the green light
to drill CM. It’s a big target we’ve been eager to test and adding it to the program makes this
project even more exciting. With current drilling at Kismet, and the CM prospect now ready to go,
we have a real opportunity to show the scale of what is emerging at the Freeze Project.”
Drilling Update: Kismet Target
The 2025 drill program at the Kismet target was designed with two primary objectives: (1) to
confirm the sub-surface presence of a mineralized tourmaline-bearing breccia reported in
historical records (see June 10 th, 2025, news release ), and (2) to test at depth for a potential
causative porphyry source to the breccia.
IDEX has now completed the first drill hole (KSMT25001) of the 2025 season at the Kismet target.
KSMT25001 was designed to test and confirm the existence and extent of the tourmaline breccia
and associated intrusive lithologies documented at surface and in historical reports. Historical
drilling at the Kismet prospect from 1965 yielded an intercept of 41.15 m at 0.85% Cu from 9.14
m in Hole 4 (Table 1; June 10th, 2025, news release).
Table 1: Significant Intercepts in Historical Drill Hole 4 at the Kismet Target
Hole KSMT25001 ended at a depth of 278 metres, which is over four times greater than the depth
of the historical hole drilled in 1965 (67.54 metres). Furthermore, KSMT25001 encountered both
2
oxide and sulfide mineralization throughout the length of the hole with varying degrees of intensity.
KSMT25001 ended in mineralization but had to be stopped due to technical drilling conditions,
with further drilling planned in follow-up holes. Core processing has now been completed, and the
samples have been submitted to AGAT Laboratories in Calgary, Alberta. Assay results from hole
KSMT25001 are expected in September.
Figure 1. Cross-Section of holes KSMT25001 and KSMT25002 at Kismet
The Company continues to advance drilling of the second hole at Kismet, KSMT25002. At the
time of writing, KSMT25002 has surpassed 404 metres depth and continues to encounter
Historical Hole 4
(1965)
3
mineralized intrusive and breccia units. Drilling remains ongoing, with assays expected in
October.
Geological Description
KSMT25001 was designed with the purpose of confirming the historical information encountered
in the tourmaline breccia drilled at Kismet in 1965. The Company is happy to report that hole
KSMT25001 has confirmed historical descriptions of lithology, mineralization and alteration.
The hole encountered mineralization from surface in the form of oxide minerals malachite and
chrysocolla, which occurs on fracture surfaces and replaces primary chalcopyrite in the matrix of
the tourmaline breccia / magmatic breccia system. The mineralization continues downhole with
zones of oxide-copper mineralization transitioning to more sulphide dominant (pyrite-chalcopyrite-
molybdenum) hydrothermal infill mineralization downhole. Oxide-copper mineralization continues
to occur at depths >200 metres along local structures.
The hole is characterized by a suite of intrusive rocks, varying from gabbro to diorite to
granodiorite in composition. The units have a complex geological interrelationship but often form
the host rocks and clasts contained in intervals of magmatic breccia. The magmatic breccia
system has been variably overprinted by variably mineralized hydrothermal fluids, including a
tourmaline-magnetite (hematite)-pyrite-chalcopyrite assemblage that acts as infill to, or entirely
overprints the system. There are intermittent zones of silicified intrusive that appear to pre-date
the brecciation event; however, the relative timing of emplacement, brecciation and mineralization
and subsequent faulting of all units at Kismet is not currently constrained. Additional drilling along
and parallel to section is anticipated to aid in this interpretation.
The hole was stopped at a depth of 278 metres within a mineralized interval of breccia with
fracture coating oxide copper minerals, malachite and chrysocolla. Drilling was terminated due to
circulation loss and challenging ground conditions; however, the hole successfully confirmed
mineralization at depth and remains open for follow up drilling.
Qualified Person Statement
David Hladky, P.Geol. (registered in Alberta) and VP Exploration of IDEX Metals Corp., a
Qualified Person (“QP”) as defined in National Instrument 43-101 Standards of Disclosure for
Mineral Projects, is responsible for the accuracy of, and has reviewed and approved the use of
the scientific, technical and historical information pertaining to the Freeze Project (the “Project”)
in this news release.
About IDEX Metals Corp.
IDEX Metals Corp. is a mineral exploration company focused on advancing a portfolio of base
and precious metal projects in Idaho, USA. IDEX is primarily focused on the exploration and
development of the Freeze Copper-Gold porphyry prospect located in the newly discovered Idaho
Copper Belt, Washington County, Idaho. With a strategic land position in a top-tier mining
4
jurisdiction and surrounded by major industry players, IDEX is committed to redefining district-
scale exploration in Idaho.
For more information, please visit https://idexmetals.com/.
ON BEHALF OF THE BOARD OF DIRECTORS
Clayton Fisher, CEO & Director
For further information regarding IDEX contact:
Sharyn Alexander
Vice President Corporate Development
1 (604) 260-0356
Cautionary Note Regarding Forward-Looking Statements
Statements contained in this news release that are not historical facts may be forward-looking
statements. These forward-looking statements involve risks, uncertainties and other factors that
could cause actual results to differ materially from those expressed or implied by such forward-
looking statements. In addition, the forward-looking statements require management to make
assumptions and are subject to inherent risks and uncertainties. There is significant risk that the
forward-looking statements will not prove to be accurate, that the management’s assumptions
may not be correct and that actual results may differ materially from such forward-looking
statements. Accordingly, readers should not place undue reliance on the forward-looking
statements. Generally forward-looking statements can be identified by the use of terminology
such as “anticipate”, “will”, “expect”, “may”, “continue”, “could”, “estimate”, “forecast”, “plan”,
“potential” and similar expressions. These forward-looking statements are based on a number of
assumptions which may prove to be incorrect which, without limiting the generality of the following,
include: risks inherent in exploration activities; the impact of exploration competition; unexpected
geological or hydrological conditions; changes in government regulations and policies, including
trade laws and policies; failure to obtain necessary permits and approvals from government
authorities; volatility and sensitivity to market prices; volatility and sensitivity to capital market
fluctuations; the ability to raise funds through private or public equity financings; environmental
and safety risks including increased regulatory burdens; weather and other natural phenomena;
and other exploration, development, operating, financial market and regulatory risks. The forward-
looking statements contained in this press release are made as of the date hereof or the dates
specifically referenced in this press release, where applicable. Except as required by applicable
securities laws and regulation, IDEX disclaims any intention or obligation to update or revise any
forward-looking statement, whether as a result of new information, future events or otherwise,
except as required by applicable securities laws. All forward-looking statements contained in this
press release are expressly qualified by this cautionary statement.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined
in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.