Rackla Metals reports drilling has commenced at BiTe and provides initial core observations
Rackla Metals reports drilling has commenced at BiTe and provides
initial core observations
Vancouver, British Columbia – July 14th, 2025 – Rackla Metals Inc. (TSX-V: RAK) is pleased to
announce that drilling and has commenced at the BiTe zone on the Grad property NWT.
The Grad property was staked in July of 2024, and immediate prospecting defined strong
gold mineralization at the base of the south facing cliff. Further sampling in August identified
significant sheeted veining hosted in the intrusive and that combined with the gold, bismuth
and tellurium geochemistry made it clear that we had discovered a compelling Reduced
Intrusion-related Gold Systems (RIRGS) occurrence that had never previously been identified
or staked. A UAV (drone) based photogrammetric survey and Airborne geophysical survey
were conducted late in the 2024 season. The photogrammetry revealed that sheeted veining
and alteration could be observed over a large area, both vertically and laterally outward from
the initial discovery, known as the BiTe zone. A 4,000m diamond drill program has been
initiated to test this gold system.
Three drill pads have been prepared at BiTe to test 300m of the zone. A fourth pad has been
located along strike of the vein system south of the first pad closer to the intrusive/sediment
contact where subcrop sampling of the intrusive returned 1.8 g/t Au. The drill holes are
planned to depth between 200 and 500m, testing the zone laterally with two holes per pad.
Holes from pad B and pad D will test 85 and 100m vertically below holes G25-001 and 002
(see Figure 1).
1111 Melville Street, Suite 1000
Vancouver, BC V6E 3V6, Canada
www.racklametals.com
T 604.801.5432
F 604.662.8829
TF 1.888.627.9378
RAK:TSX.V
-2-
Figure 1 – Map of the drilling in progress and next pads.
The first drill hole G25-001 has been drilled to 208m and the second hole G25-002 is
currently being drilled, current depth at 48m. The core shows a consistent set of sheeted
veining, with density averaging between 5 to 10 veins per metre, containing bismuth
sulphides, chalcopyrite and pyrrhotite. Sections of strongly sericitized quartz diorite have
been observed with 5% disseminated bismuth sulphides (see Figure 2 and 3).
-3-
Figure 2 – G25-001 core from 59.50m to 73.00m showing sheeted veins in granodiorite and
strongly sericitized quartz diorite with disseminated bismuth sulphides.
-4-
Figure 3 – G25-001 core boxes showing strong sheeted veining and cross-cutting sets.
-5-
To confirm vertical continuity of the gold-bearing system to the ridge top, 350m above the
drill, a team of mountaineering geologists are working on high-angle (rope supported) spot,
chip and channel sampling. Their focus is to sample both vertically and across-strike up to
150m below the ridge top on both the south and north faces of the ridge. Work has
commenced on the north face and distal to the core BiTe zone while the drilling is ongoing at
BiTe.
Permits and Program Supports
The Grad Project is fully permitted for the 2025 exploration season. The company obtained a
five-year, Type A Land Use Permit from the Sahtu Land and Water Board in April of this year,
with potential for a two-year extension. This allows Rackla to significantly advance exploration
efforts, beginning with drilling at the BiTe Zone - a high priority target showing early promise.
All contracts are in place to support the program. The Rackla team will be supported by
Horizon Helicopters, Tintina Air, Minconsult Exploration Services, Kluane Diamond Drilling,
AFD Petroleum, Trailblazer Expediting, Smalls Expediting, and Selwyn Chihong Mining Ltd.
Qualified Person
Scott Casselman, B.Sc., P.Geo., Vice-President Exploration of the Company, is a member of the
Association of Professional Engineers and Geoscientists of British Columbia and the Northwest
Territories and Nunavut Association of Professional Engineers and Geoscientists and is the
Company’s Qualified Person as defined by National Instrument 43 -101. Mr. Casselman has
reviewed and approved the technical information contained in this news release.
About Rackla
Rackla Metals Inc. (TSX-V: RAK) is a Vancouver, Canada based junior gold exploration
company. The Company is targeting Reduced Intrusion-Related Gold Systems (RIRGS)
mineralization on the southeastern part of the Tombstone Gold Belt in eastern Yukon and
western Northwest Territories. Management believes that this area, which is underexplored
for RIRGS deposit types, has the potential to be the next frontier for the discovery of these large
gold systems.
ON BEHALF OF THE BOARD
Simon Ridgway,
CEO and Director
Tel: (604) 801-5432; Fax: (604) 662-8829
Email: [email protected]
Website: www.racklametals.com
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the
policies of the TSX Venture Exchange) accept responsibility for the adequacy or accuracy of this news
release.
Forward-Looking Information
-6-
Certain statements contained in this news release constitute forward-looking statements within the
meaning of Canadian securities legislation. All statements included herein, other than statements of
historical fact, are forward- looking statements and include, without limitation, the Company’s future
exploration activities, and general business and economic conditions. Often, but not always, these
forward looking statements can be identified by the use of words such as “estimate”, “estimates”,
“estimated”, “potential”, “open”, “future”, “assumed”, “projected”, “used”, “detailed”, “has been”, “gain”,
“upgraded”, “offset”, “limited”, “contained”, “reflecting”, “containing”, “remaining”, “to be”, “periodically”,
or statements that events, “could” or “should” occur or be achieved and similar expressions, including
negative variations.
Forward-looking statements involve known and unknown risks, uncertainties and other factors which may
cause the actual results, performance or achievements of the Company to be materially different from
any results, performance or achievements expressed or implied by forward-looking statements. Such
uncertainties and factors include, among others, changes in general economic conditions and financial
markets; the Company or any joint venture partner not having the financial ability to meet its exploration
and development goals; risks associated with the results of exploration and development activities,
estimation of mineral resources and the geology, grade and continuity of mineral deposits; unanticipated
costs and expenses; and such other risks detailed from time to time in the Company’s quarterly and
annual filings with securities regulators and available under the Company’s profile on SEDAR+ at
www.sedarplus.ca. Although the Company has attempted to identify important factors that could cause
actual actions, events or results to differ materially from those described in forward-looking statements,
there may be other factors that cause actions, events or results to differ from those anticipated, estimated
or intended.
Forward-looking statements contained herein are based on the assumptions, beliefs, expectations and
opinions of management, including but not limited to: that the Company’s stated goals and planned
exploration activities at its properties will be achieved; that there will be no material adverse change
affecting the Company, its properties or its securities; and such other assumptions as set out herein.
Forward-looking statements are made as of the date hereof and the Company disclaims any obligation
to update any forward-looking statements, whether as a result of new information, future events or results
or otherwise, except as required by law. There can be no assurance that forward-looking statements will
prove to be accurate, as actual results and future events could differ materially from those anticipated in
such statements. Accordingly, investors should not place undue reliance on forward-looking statements.