Sunday, September 20, 2026
MiningNewsTerminal
Sunday, September 20, 2026 Admin

PONY.CN ·

Models Large Geophysical Anomalies and Increases Land Position

Mergers & Acquisitions Property Options & Staking Exploration Programs

3707‐1111 Alberni Street, Vancouver, British Columbia V6E 0A8 

News Release 

DELREY MODELS LARGE GEOPYHSICAL ANOMALIES ON ITS BLACKIE, 

PORCHER, AND STAR PROPERTIES 

INCREASES LAND POSITION DUE TO POSTIVE RESULTS 

April 15, 2019                                      CSE:DLRY | FSE:1OZ | US:DLRYF 

DELREY  METALS  CORP.  (CSE:DLRY,  FSE:1OZ,  US:DLRYF)  (“Delrey”  or  the  “Company”)  is  pleased  to 

announce  that  it  has  completed  airborne  geophysics  across  its  Porcher,  Blackie  and  Star  properties 

located  near  Prince  Rupert,  British  Columbia.  The  results  are  very  encouraging  and  outline  sizeable 

magnetic  anomalies  on  all  three  properties.  This  is  highlighted  by  two,  3km  x  2km  &  2.7km  x  1.8km, 

magnetic highs located on its wholly‐owned Porcher property (Fig. 1), a 11km long northwest‐southeast 

trending magnetic high located on its wholly‐owed Star property (Fig. 2), and a 1.5km x 800m magnetic 

high  (up  to 68,000nT raw) located on its wholly‐owned Blackie property (Fig.  3). A historic 2.14% V205 

bedrock  sample  from  the  Blackie  is  believed  to  be  coincident  with  the  newly  mapped  geophysical 

anomaly (McDougall, 1984).1  

The three surveys were completed by Ridgeline Exploration Services Inc. out of Kelowna, B.C., and were 

flown  in  a  systematic  low‐level  grid  pattern  at  150‐m  line  spacing.  The  average  terrain  clearance  was 

75m  across  all  surveys  and  a  total  of  1,105.55  line‐km  (Porcher:  472.48  line‐km;  Star:  457.48  line‐km; 

Blackie: 175.59 line‐km) were flown. 

Based on results from the surveys the Company is pleased to announce that it has increased to size of 

the Porcher property from 3,122.16 to 3,525.46‐hectares, and the Star property from 3,646.8 to 4,618.3‐

hectares to fully encompass the newly discovered magnetic anomalies. The results from the surveys will 

be used in helping Delrey’s technical team plan a Phase II work program which will include prospecting, 

mapping and rock sampling over the geophysical anomalies.  

The crews are currently mobilizing to the Peneece property and it is estimated that the survey will be 

completed within the week with results released shortly thereafter. 

“The Delrey team is quite excited by the results of the Phase I work program on the Blackie, Porcher and 

Star  properties.  High‐resolution  magnetics  are  an  effective  tool  used  for  vectoring  towards  Fe‐Ti‐V 

bearing magnetite deposits. The large anomalies identified by the 2019 surveys combined with historic 

surface sampling confirming vanadium and titanium mineralization gives us confidence in the potential 

of these three properties. We are looking forward to returning to the properties in the coming weeks to 

follow up with a Phase II work program over the magnetic anomalies. This timeline will allow Delrey to 

conduct  a  Phase  III  work  program  on  the  properties  during  the  summer  months  which  may  include 

diamond  drilling  over  the  highest  priority  targets  developed  from  the  Phase  I  and  II  field  programs”, 

commented Morgan Good, Delrey’s President and Chief Executive Officer. 

FIG. 1 

FIG. 2 

FIG. 3 

About Delrey 

Delrey  is  a  mineral  exploration  company  focused  on  the  acquisition,  exploration  and  development  of 

mineral  resource  properties,  specifically  in  the  strategic  energy  metals  space.  The  Company  has  an 

option  to  earn  a  100%  interest  in  the  Sunset  property  located  in  the  Vancouver  Mining  Division  near 

Pemberton, British Columbia. The Company also owns 100% of the Star, Porcher, Peneece and Blackie 

Fe‐Ti‐V properties located along tide‐water in western British Columbia. Delrey will continue to review 

and  acquire  projects  showing  potential  for  materials  used  in  the  energy  storage  and  electric  vehicle 

markets.  The  Company  is  based  in  Vancouver,  British  Columbia,  and  is  listed  on  the  CSE  under  the 

symbol “DLRY”. 

Qualified person 

Scott Dorion,, P.Geo., is the designated Qualified Person of the Company as defined by NI 43‐101 and 

has reviewed and approved the technical information contained in this release. 

ON BEHALF OF THE BOARD OF DIRECTORS OF 

DELREY METALS CORP. 

“Morgan Good” 

Morgan Good 

President and Chief Executive Officer 

For more information regarding this news release, please contact: 

Morgan Good, CEO and Director 

T: 604‐620‐8904 

E: [email protected] 

W: www.delreymetals.com 

1This  historical  results  are  believed  to  be  based  on  reasonable  assumptions,  and  neither  the  company 

nor its qualified person has any reason to contest the relevance and reliability of the historical samples. 

However, a qualified person has not done sufficient work to replicate historic rock grab samples using 

current lab methods. Although the historical rock grab samples are believed to be based on reasonable 

sampling  and  assay  methodologies,  they  were  calculated  prior  to  the  implementation  of  National 

Instrument 43‐101. The historical results have not been verified.  

Cautionary Note Regarding Forward‐Looking Statements 

Certain statements contained in this news release, constitute “forward‐looking information” as such term is used in applicable 

Canadian  securities  laws.  Forward‐looking  information  is  based  on  plans,  expectations  and  estimates  of  management  at  the 

date  the  information  is  provided  and  is  subject  to  certain  factors  and  assumptions,  including,  but  are  not  limited  to,  general 

business  and  economic  uncertainties.  Forward‐looking  information  is  subject  to  a  variety  of  risks  and  uncertainties  and  other 

factors  that  could  cause  plans,  estimates  and  actual  results  to  vary  materially  from  those  projected  in  such  forward‐looking 

information.  Factors  that  could  cause  the  forward‐looking  information  in  this  news  release  to  change  or  to  be  inaccurate 

include,  but  are  not  limited  to,  the  risk  that  any  of  the  assumptions  referred  to  prove  not  to  be  valid  or  reliable,  which  could 

result in delays, or cessation in planned work, that the Company’s financial condition and development plans change, delays in 

regulatory approval, risks associated with the interpretation of data, the geology, grade and continuity of mineral deposits, the 

possibility  that  results  will  not  be  consistent  with  the  Company’s  expectations,  as  well  as  the  other  risks  and  uncertainties 

applicable to mineral exploration and development activities and to the Company as set forth in the Company’s Management’s 

Discussion  and  Analysis  reports  filed  under  the  Company’s  profile  at  www.sedar.com.  There  can  be  no  assurance  that  any 

forward‐looking  information  will  prove  to  be  accurate,  as  actual  results  and  future  events  could  differ  materially  from  those 

anticipated in such statements. Accordingly, the reader should not place any undue reliance on forward‐looking information or 

statements.  The  Company  undertakes  no  obligation  to  update  forward‐looking  information  or  statements,  other  than  as 

required by applicable law. 

Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the CSE) 

accepts responsibility for the adequacy or accuracy of this release.