Saturday, September 19, 2026
MiningNewsTerminal
Saturday, September 19, 2026 Admin

BEX.V ·

Benton Identifies Large, Deep Conductive Electro Magnetic Plates Associated with Known Mineralized Zones at South Pond Drilling at Great Burnt Set to Resume in the Next Week

Exploration Programs

Benton Identifies Large, Deep Conductive

Electro Magnetic Plates Associated with

Known Mineralized Zones at South Pond

Drilling at Great Burnt Set to Resume in the Next Week

Thunder Bay, Ontario--(Newsfile Corp. - April 22, 2025) -

Benton Resources Inc

. (TSXV: BEX) ("Benton"

or the "Company") is pleased to announce that it has completed approximately 70% of a planned 5 km-

long surface Pulse Electromagnetic ("EM") survey along the northern portion of the South Pond trend on

the Great Burnt Property. Interpretation of the data collected to date has identified several new, extensive

conductive plates, along with large conductive plates directly associated with known mineralized zones

at surface. Preliminary interpretation suggests that the known zones may be situated near the crest of an

anticlinal fold, with additional conductive EM plates located to the east and west along the limbs of the

structure. Diamond drilling and further geological mapping will target these conductive zones in the next

phase of drilling (see Figure 1).

Figure 1: South Pond Drilling and EM Conductors

To view an enhanced version of this graphic, please visit:

https://images.newsfilecorp.com/files/3657/249299_d9c17a0094d82886_002full.jpg

The South Pond trend has been drill-tested at shallow depths over a strike length of approximately 2.3

km with impressive results highlighted below.

Table 1: Highlights of South Pond trend Drill Results:

DDH #

From (m)

To (m)

Length (m)

Au (g/t)

SP-24-01

18.20

37.00

18.80

1.13

incl

27.24

33.20

5.96

2.06

incl

27.24

28.90

1.66

5.17

SP-24-03

20.15

63.90

43.75

1.62

incl

33.00

43.90

10.90

1.90

incl

58.90

63.90

5.00

3.48

incl

58.90

62.90

4.00

3.99

SP-24-08

81.00

95.00

14.00

1.23

incl

81.00

85.00

4.00

2.33

incl

84.00

85.00

1.00

3.24

SP-24-09

32.00

56.00

24.00

1.48

incl

48.00

55.00

7.00

2.03

incl

50.00

52.00

2.00

3.09

SP-24-12

27.00

54.07

27.07

1.08

incl

38.00

43.00

5.00

2.11

incl

38.00

39.00

1.00

4.11

SP-24-13

3.25

23.00

19.75

1.42

incl

10.00

14.00

4.00

3.08

incl

12.00

13.00

1.00

5.30

SP-24-15

36.40

58.90

22.50

1.24

incl

41.40

45.40

4.00

2.08

SP-24-17

32.60

41.20

8.60

1.32

incl

36.60

38.60

2.00

2.10

and

50.05

59.30

9.25

0.47

SP-24-23

59.75

66.50

6.75

2.90

incl

60.75

63.75

3.00

6.42

incl

60.75

61.75

1.00

15.72

SP-24-28

9.40

36.80

27.40

1.00

incl

13.40

16.40

3.00

2.92

incl

15.40

16.40

1.00

5.88

SP-24-30

2.30

10.30

8.00

2.07

incl

6.30

10.30

4.00

3.54

incl

7.30

9.30

2.00

4.83

incl

8.30

9.30

1.00

5.13

SP-24-31

37.00

45.00

8.00

1.26

incl

37.00

40.00

3.00

2.78

incl

39.00

40.00

1.00

5.43

SP-24-32

34.10

88.60

54.50

1.88

incl

43.10

57.10

14.00

2.41

incl

52.10

53.10

1.00

9.68

and

68.10

80.10

12.00

3.34

incl

72.10

75.10

3.00

4.87

Note: Widths quoted are true core length, at this early stage, further drilling is required

to determine true width of mineralization

Figure 2: South Pond Drill Hole Location Map

To view an enhanced version of this graphic, please visit:

https://images.newsfilecorp.com/files/3657/249299_d9c17a0094d82886_003full.jpg

In addition, the Company is pleased to announce that it will recommence drilling at the Great Burnt Main

Zone ("GBMZ") and the new discovery at the deep NSZ within the next week.

The Company recently

completed drill hole

GB-25-53

, a 100 m step out from GB-23-45, which intersected a wide zone of

copper mineralization grading

0.77% Cu

over

32.1 m

including

1.12% Cu

over

18.97 m, 1.83% Cu

over

8.63 m, 2.41%

Cu

over

5.25 m,

and

4.34% Cu

over

1.00 m

within the broader 32.1 m interval

.

A

subsequent downhole Pulse Electromagnetic Survey has identified the presence of a conductor down-

plunge from the new intercept indicating further expansion potential to the south. A 50 m step-out hole will

be designed to test the conductor in anticipation of further expanding the zone.

Figure 3: Great Burnt Copper Main Zone Longitudinal Section

To view an enhanced version of this graphic, please visit:

https://images.newsfilecorp.com/files/3657/249299_d9c17a0094d82886_004full.jpg

North Stringer and Footwall Zones

In addition, the Company plans at least 4 drill holes around the significant new discovery beneath the

North Stringer Zone ("NSZ") where

Hole GB-25-59

encountered two zones, with the upper zone

returning 0.69% Cu over 14.40 m, including

1.09% Cu

over

3.00 m

. The lower zone returned 0.80% Cu

over 15.00 m, including 0.96% Cu over 6.20 m, 1.65% Cu over 3.00 m and

2.07% Cu

over

2.00 m.

The

upper zone was associated with gold mineralization grading 0.67g/t Au over 14.40 m including

2.16g/t

Au

over

3.00 m

. The lower zone, with higher grade copper, is associated with a down-hole/off-hole EM

anomaly, indicating considerable expansion potential for this new area. Drilling will target this new

anomaly and area for expansion.

Additional drilling will also target the Footwall Zone ("FZ") located

250 m

east of the GBMZ where Hole

GB-25-51

intersected a significant copper-gold horizon which graded

0.58% Cu

over

10.47 m

including

1.11% Cu

and

0.88g/t Au

over

5.09 m

.

Figure 4: Great Burnt Project Compilation Map

To view an enhanced version of this graphic, please visit:

https://images.newsfilecorp.com/files/3657/249299_d9c17a0094d82886_005full.jpg

Benton has a 70% interest in the Great Burnt Copper-Gold Project and Homeland Nickel holds the

remaining 30%, where they are funding their respective interest, with Benton as the project operator.

The Company would also like to express its appreciation to the Newfoundland and Labrador Provincial

Government's Junior Exploration Assistance program for financial grants supporting mineral exploration

projects in the province.

Benton has been fortunate to have received these grants, which are an

important catalyst for mineral exploration in this highly favourable mining jurisdiction.

QA/QC Protocols

Core and rock samples, including standards, blanks and duplicates, are submitted to Eastern Analytical

Ltd., Springdale, Newfoundland for preparation and analysis. All samples were acquired by saw-cut

(channels/drill core) with one-half submitted for assay and one-half retained for reference, or hand (rocks)

and delivered, by Benton personnel, in sealed bags, to the Springdale lab of Eastern Analytical, which is

an accredited assay lab that conforms to the requirements of ISO/IEC 17025. Samples are analyzed

using Eastern's Au (Fire assay) @ 30g + ICP-34 method that delivers a 34-element package utilizing a

200 mg subsample totally dissolved in four acids and analyzed by ICP-OES analytical technique.

Overlimits are analysed with Eastern's atomic absorption method, using a 0.200 g to 2.00 g of sample,

digested with three acids. All reported assays are uncut. Eastern Analytical Ltd. achieved ISO 17025

accreditation in February 2014 (for more details on the scope of accreditation visit the CALA website).

QP

Stephen House (P.Geo.), Vice President of Exploration for Benton Resources Inc., the 'Qualified Person'

under National Instrument 43-101, has approved the scientific and technical disclosure in this news

release and prepared or supervised its preparation.

About Benton Resources Inc.

Benton Resources is a well-financed mineral exploration company listed on the TSX Venture Exchange

under the symbol BEX. Benton has a diversified, highly prospective property portfolio and holds large

equity positions in other mining companies that are advancing high-quality assets. Whenever possible,

BEX retains net smelter return (NSR) royalties with potential long-term cash flow.

Benton is focused on advancing its high-grade Copper-Gold Great Burnt Project in central

Newfoundland, which has a Mineral Resource estimate of 667,000 tonnes @ 3.21% Cu Indicated and

482,000 @ 2.35% Cu Inferred. The Project has an excellent geological setting covering 25 km of strike

and boasts six known Cu-Au-Ag zones over 15 km that are all open for expansion. Further potential for

discovery is excellent given the extensive number of untested geophysical targets and Cu-Au soil

anomalies.

All drilling phases at Great Burnt to date have returned impressive results including: GB-23-02: 13.00 m

of 8.31% Cu, incl 3.00 m of 12.80% Cu GB-23-04: 26.87 m of 7.18% Cu, incl 11.16 m of 10.28% Cu

GB-23-12: 25.42 m of 5.51% Cu, incl 1.00 m of 8.77% Cu, 82.00g/t Ag, 4.43g/t Au GB-23-15: 22.59 m

of 5.03% Cu, incl 0.50 m of 20.00% Cu GB-23-21: 24.00 m of 5.81% Cu, incl 7.00 m of 11.47% Cu GB-

23-22: 21.68 m of 3.59% Cu, incl 2.00 m of 15.3% Cu.

Drilling at the South Pond Gold Zone, approximately 7.5 km north of the Great Burnt Copper-Gold Zone,

has confirmed a robust gold-mineralized system over 2.5 km with robust results including:

SP-24-03:

43.75 m of 1.62g/t Au, SP-24-07: 74.20 m of 1.43g/t Au, SP-24-15: 22.50 m of 1.24g/t Au and SP-24-

32: 54.5 m of 1.88g/t Au and is open for expansion in all directions.

On behalf of the Board of Directors of Benton Resources Inc.,

"Stephen Stares"

Stephen Stares, President

Parties interested in seeking more information about properties available for option can contact Mr.

Stares at the number below.

For further information, please contact:

Stephen Stares, President & CEO

Phone:

807-474-9020

Email:

[email protected]

Nick Konkin, Investor Relations

Phone

: 647-249-9298 ext. 322

Email

:

[email protected]

Website:

www.bentonresources.ca

Twitter:

@BentonResources

Facebook:

@BentonResourcesBEX

THE TSX VENTURE EXCHANGE HAS NOT REVIEWED AND DOES NOT ACCEPT

RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE.

The information contained herein contains "forward-looking statements" within the meaning of

applicable securities legislation. Forward-looking statements relate to information that is based on

assumptions of management, forecasts of future results, and estimates of amounts not yet

determinable. Any statements that express predictions, expectations, beliefs, plans, projections,

objectives, assumptions or future events or performance are not statements of historical fact and may

be "forward-looking statements."

Forward-looking statements are subject to a variety of risks and uncertainties which could cause

actual events or results to differ from those reflected in the forward-looking statements, including,

without limitation: risks related to failure to obtain adequate financing on a timely basis and on

acceptable terms; risks related to the outcome of legal proceedings; political and regulatory risks

associated with mining and exploration; risks related to the maintenance of stock exchange listings;

risks related to environmental regulation and liability; the potential for delays in exploration or

development activities or the completion of feasibility studies; the uncertainty of profitability; risks and

uncertainties relating to the interpretation of drill results, the geology, grade and continuity of mineral

deposits; risks related to the inherent uncertainty of production and cost estimates and the potential

for unexpected costs and expenses; results of prefeasibility and feasibility studies, and the possibility

that future exploration, development or mining results will not be consistent with the Company's

expectations; risks related to gold price and other commodity price fluctuations; and other risks and

uncertainties related to the Company's prospects, properties and business detailed elsewhere in the

Company's disclosure record. Should one or more of these risks and uncertainties materialize, or

should underlying assumptions prove incorrect, actual results may vary materially from those

described in forward-looking statements. Investors are cautioned against attributing undue certainty to

forward-looking statements. These forward-looking statements are made as of the date hereof and the

Company does not assume any obligation to update or revise them to reflect new events or

circumstances. Actual events or results could differ materially from the Company's expectations or

projections.

To view the source version of this press release, please visit

https://www.newsfilecorp.com/release/249299