Sunday, September 20, 2026
MiningNewsTerminal
Sunday, September 20, 2026 Admin

LTHM.CN ·

Idaho Champion Increases Land Package Around Past Producing Champagne Project

Mergers & Acquisitions Property Options & Staking

Idaho Champion Increases Land Package Around

Past Producing Champagne Project

• 140% Increase in land package for a total of 10 square miles

• Historical artisanal pits and adits found on newly staked ground

• New Claims to be included in regional exploration program

Toronto, ON – June 1, 2020 - Idaho Champion Gold Mines Canada Inc. (CSE:

ITKO) (“Champion” or the "Company"), announces the staking of 184 additional

unpatented federal mining claims surrounding the past producing Champagne

project. The Champagne properties now encompass approximately ten (10) Sq.

miles of prospective exploration ground in Butte County, Idaho.

Figure 1: Champagne Project Property Boundaries

“During the desktop study on the historical data, one of the details that has stood

out to our technical team was the evidence of a much bigger system at depth. We

believe that this system extends beyond our original claims.,” President and CEO

Jonathan Buick stated. “The presence of artisanal pits and adits within the new

claim blocks support there is something to be investigated with the drill bit.”

A major focus of the Company’s exploration thesis is on the patented property

(see news release dated April 30, 2020) which hosts past producing Bema Gold

Corporation’s (“Bema”) open pit. The focus is supported by the recently released

(see news releases dated May 11,14, 21, and 26, 2020) historical data that was

purchased from Kinross Gold Corporation in March 2020.

James Baughman, Sr. Consulting Geologist stated: “The Champagne gold project

is located on the southern margin of the Challis Volcanics, home to some of

Idaho’s most valuable gold projects. Champagne has all the markings of a tier 1

project – past gold producer, numerous historical mines on the property, and a

large foot-print of alteration and mineralization on the project site stretching

beyond the historic mine pit. We have 100 historic drill holes on the property that

contain significant intercepts both within the historic mine pit (which presumably

would have been fully or partially mined by Bema) and in the surrounding areas,

as outlined in our previous news releases. These historic drill holes were

completed to a shallow depth for oxide mineralization. Our summer drill program

will test beneath these holes for the source of the surface mineralization at

Champagne.”

The summer 2020 exploration program will focus on drilling the historical mine

area and mapping and sampling outside of the mine area. An IP geophys ical

program is planned as well for the entire claim block. The goal of this work is to

potentially discover an Eocene Intrusive related gold system with significant

surface dimensions.

Historical Non-NI 43-101 Compliant Resource Estimate

The past producing Champagne project has two historic, non -NI 43-101

compliant reports that calculated mineral “reserves” at the BEMA Gold mine pit

before BEMA commenced mining operations therein. Although the BEMA report,

Bema Champagne Mine Report, January 1989 and the subsequent Mine

Associates Development Associates report titled Summary Report - Orebody

Modeling and Mine Design, September, 1989 both refer to “reserves”, the

Company considers these “reserves” are more accurately categorized as mineral

resources as it has not been determined whether these meet the current standard

for a reserve classification. This is why in prior news releases the Company

referred to these “reserves” as resources.

The BEMA report provides that the pit, prior to mining, had a “reserve” estimate

of 2.3 million tons (“MT”) at 0.902 grams per ton Au and 24.48 g/ton Ag in the

proven and probable categories. Mineralized zones were classified by BEMA as

proven if within 18 metres (60 feet) of a drill hole or trench. The mineralized zones

were classified as probable if within 36 metres (120 feet) of a drill hole or trench.

The “reserve” calculation was determined by using sectional polygons, a common

method at the time the BEMA report was produced. A subsequent calculation was

undertaken by Mine Development Associates. The “reserve” estimate was

tabulated directly from the sectional ore blocks as a check of the BEMA results

and were found to be within 0.7% of this tonnage with the same average grade .

In both reports a lower cutoff of >0.3g/ton Au were used. Neither report provided

a description of their QA/QC protocols.

The historical “reserve” estimate is considered to be reliable, however the

computational method and calculations used to derive the “reserve” estimate has

not been reviewed by a Qualified Person. While the historic “reserve” may be fully

or predominantly mined within the old BEMA pit, the Company’s thesis, based on

the available historic data, including historic trenching and drilling outside the pit

and historic drilling that reached below the pit is that additional mineralization may

remain in the pit and may extend at depth and continue beyond the mine pit. The

continuation of mineralization, include grades, has not yet been confirmed by the

Company and is the subject of future exploration work.

Readers are cautioned that: (i) a qualified person has not done sufficient work to

classify the historical estimate as current mineral resources or mineral reserves;

and (ii) the issuer is not treating the histori cal estimate as current mineral

resources or mineral reserves.

Geology

The historical data was acquired by Gold Fields Limited, then Bema, in the

development of the Champagne mine. Trench data outlines a gold enriched oxide

zone with shallow reverse circulation drill holes located under the trenches that

outline a zone of veins and breccia pipes ,which included the mined pit but also

extend beyond the pit perimeter, as described above. Field work is being planned

for this field season to map and sample the Champagne mine area, including the

area under and around the mined pit, in preparation for a reverse circulation drill

program.

The geology of the Champagne mine area is well documented in maps and

reports prepared by the State of Idaho and the United States Geological Survey.

Surface host rocks are Challis Volcanics underlain by Devonian-Mississippian

Milligan formation composed of quartzites, limestones, and calcareous

sediments. The Milligan formation was intruded by Idaho Batholith and

subsequent igneous events that located the mineralization at Champagne.

Exploration at Champagne will focus on surface delineation of alterati on and

mineralization and drilling will focus on a deep target (500m) in the Milligan

formation

Figure 3: Champagne Project Location Map

About Champagne Project

The Champagne mine was operated by Bema as a heap leach operation on a high

sulfidation gold system that occurs in volcanic rocks. Bema drilled 72 shallow

reverse circulation holes in addition to previous operators drilling and trenching. The

property had no deep drilling or modern exploration since the mine’s closure in early

1992.

The historic Champagne deposit contains epigenetic style gold and silver

mineralization that occurs in strongly altered Tertiary volcanic tuffs and flows of

acid to intermediate composition at Lava Creek. Argillic and sericite alteration is

widespread at the historic Champagne deposit. Silica flooding, alunite and barite

are closely associated with the gold and silver mineralized zone.

Champagne has a near surface cap of gold-silver mineralization emplaced by deep-

seated, structurally controlled shears that acted as conduits for precious metal rich

hydrothermal fluids. High grade zones in the historic Champagne deposit appear to

be related to such feeder shear zones. Drilling in the future to test for polymetallic,

base-precious metal deposits at depth will clarify these relationships.

Qualified Person

The technical information in this press release has been reviewed and approved

by Peter Karelse P.Geo., a consultant to the Company, who is a Qualified Person

as defined by NI 43-101. Mr. Karelse has more than 30 years of experience in

exploration and development.

ABOUT IDAHO CHAMPION

Champion is a discovery-focused gold exploration company that is committed to

advancing its 100% owned highly prospective mineral properties located in Idaho,

United States. The Company’s shares trade on the CSE under the trading symbol

“ITKO”. Champion is vested in Idaho with the Baner Project in Idaho County, the

Champagne Project located in Butte County near Arco, and four cobalt properties

in Lemhi County in the Idaho Cobalt Belt. Idaho Champion strives to be a

responsible environmental steward, stakeholder and a contributing citizen to the

local communities where it operates. Champion takes its social license seriously

and employs local community members to service its operations.

ON BEHALF OF THE BOARD,

“Jonathan Buick”

Jonathan Buick, President and CEO

For further information, please visit the Company’s SEDAR profile at

www.sedar.com or the Company’s corporate website at www.idahochamp.com.

For further information please contact:

Nicholas Konkin, Marketing and Communications

Phone: (416) 477 7771 ext. 205

Email: [email protected]

Cautionary Statements

Neither the Canadian Securities Exchange nor its regulation services provider has

reviewed or accepted responsibility for the adequacy or accuracy of this press release

This press release may include forward-looking information within the meaning of

Canadian securities legislation, concerning the business of the Company. Forward -

looking information is based on certain key expectations and assumptions made by the

management of the Company. Although the Company believes that the expectations and

assumptions on which such forward-looking information is based on are reasonable,

undue reliance should not be placed on the forward-looking information because the

Company can give no assurance that they will prove to be correct. Forward -looking

statements contained in this press release are made as of the date of this press release.

The Company disclaims any intent or obligation to update publicly any forward-looking

information, whether as a result of new information, future events or results or otherwise,

other than as required by applicable securities laws.