Kutcho Copper Enhances and Defines New VMS Drill Targets
918 – 1030 West Georgia Street | Vancouver, British Columbia | Canada | V6E 2Y3
Telephone: (604) 628-5623 | www.kutcho.ca
Kutcho Copper Enhances and Defines New VMS Drill Targets
Vancouver, B.C., February 6, 2025. Kutcho Copper Corp. (TSXV: KC ) (OTC: KCCFF ) (“Kutcho
Copper” or the “Company”) is pleased to provide additional drill targeting advancements for our anticipated
2025 exploration field program at its feasibility stage, high-grade copper-zinc development project (the
“Project”) located in north-western British Columbia.
Vince Sorace, President & CEO of Kutcho Copper stated: “We continue to refine and enhance our
exploration potential utilizing extensive and new ZTEM, VTEM and seismic geophysical data to extract
the best targeting information for our anticipated 2025 exploration drilling campaign. We are excited about
the definition of new VMS targets and the potential for new discoveries, especially at the Esso West target,
which could have a positive and compelling impact on the Project.”
Exploration VMS Targeting Update
Interpretation of the results of constrained 3D Inversion models of magnetic and ZTEM1 conductivity data
has high-lighted and refined several high priority drill ready VMS targets.
The ZTEM inversion analysis was complimented with historic al and expanded (2023) VTEM data set s.
The interpretation of VTEM signals enables the determination of horizon dip and discrimination of
stratabound unmineralized conductors such as graphitic shale from sulphide mineralization. T he ZTEM
technology can image conductive horizons at a greater depth than VTEM.
Modelling and interpretation were completed in two phases – an initial phase (phase one) focussed on the
corridor of known mineralization, enabling verification of the modelling process with real mineralization
results. Interpretation of Phase One of the ZTEM inversion model work defined three near mineralization
targets - Esso West, Sumac Gap, and Hamburger. All three targets are in Kutcho time horizon rocks , all
show conductivity results similar to the known mineralization and occur immediate to the defined resources.
These represent drill ready targets, for testing in 2025.
Mira Geoscience recently completed Phase Two of the ZTEM inversion model to encompass all ZTEM
information (which covers over 90% of the claim area). Interpretation of the results of the ZTEM
conductivity models within the expanded area has refined and defined four high priority drill ready targets
with the same tenor of conductivity as seen in the targets lying within the Phase One area. The four targets
lie within Fold Repeat VMS horizons to the Kutcho Resource Time Horizon.
1 ZTEM is the Z-Axis Tipper Electromagnetic is a geophysical technique utilizing natural earth currents to image the subsurface
three-dimensional distribution of apparent resistivity to depths exceeding one kilometer.
1 VTEM is the “Versatile Time -Domain Electromagnetic” technique and is useful for detecting and discriminating between
moderate to excellent conductors
Figure 1 Isometric view of the constrained inversion of the ZTEM data intersected with the interpreted mineral event
horizon. The strength of the conductivity signal is not a direct measure of mineralization potential value.
Target Areas
Esso West
Esso West is a high priority drill ready target. The target area is approximately 1900 m strike by 500 m
down dip and lies at a depth of 300 - 600 m. The target is bracketed by a total of five historical drillholes
that intercepted a combination of (a) moderately to strongly sericite – pyrite altered quartz – crystals tuffs
that correlate to the immediate hanging wall rocks to the known deposits and (b) sericite – pyrite altered
lapilli tuffs, which are indicative of the recognized foot wall sequence . However, none of these holes
directly tested the Esso West target . One of the past holes returned an intercept of 7.2m @ 2.0% Cu and
5.2% Zn at the eastern down dip margin of the Esso West target.
A five hole drill program is planned for a total of roughly 3,500 m, combined with downhole EM surveys,
to thoroughly test the target area and aid vectoring within it, as drilling progresses.
Hamburger
The untested Hamburger target lies immediately to the east of the Main deposit and measures approximately
2,000 m along strike and 250 m down dip with an approximate depth from surface of 450 m. Several
proximal, near surface holes intersected felsic lapilli tuffs that are intensely sericite altered with pyrite and
massive pyrite pods identical to the immediate footwall to the Main deposit resource. This target requires
drill testing.
Sumac Gap
Sitting approximately 350 m below surface, Sumac Gap is a continuous 600 m by 300 m conductive target,
downdip and to the west of the Main deposit. The up-dip edge of Sumac Gap was previously intercepted
by two historical holes spaced 250 m apart and drilled in 1976. The hole s intersected carbonate and
hematite alteration typical of the immediate hanging wall, followed by an unsampled pyrite horizon which
appears indicative of the Kutcho Horizon. The alteration and mineralization present are typical of material
proximal to the mineralized zones within the known deposits. The down-dip portion of Sumac Gap presents
a compelling drill target.
Jenn
The Jenn target is a new high priority ZTEM target located on a prospective VMS horizon 5 km to the east
and south from the Main deposit. Outcrop at Jenn shows silica-sericite-pyrite alteration in felsic volcanic
rocks. Alteration is supported by a significant copper and zinc geochemical soil anomaly. Shallow
historical drilling at Jenn intersected copper bearing disseminated to semi -massive pyritic zones in felsic
rocks where best intercept was 3.3% Cu over 0.60m. This drilling was too shallow to test the ZTEM target.
The Jenn ZTEM conductivity anomaly sits approximately 300 m below surface and is 1,850 m long and
500 m wide. It requires drill testing.
Mother
The Mother target has been refined by constraint of the ZTEM inversion into two separate high conductivity
targets each measuring 950 m and 2000 m in strike length by 200 – 350 m dip direction. This near surface
target has supporting VTEM conductor anomalies, portions of which have only been tested by four short
drill holes from the 1970’s and define a prospective geological environment for a potential VMS deposit.
Two historical holes anchored on the western extents of the target intersected an interpreted felsic flow
dome consisting of a combination of sericite altered quartz, quartz – feldspar and lapilli felsic tuffs similar
to the setting of the Main, Sumac, and Esso deposits. Silica exhalites with jasperoid development, and bands
of magnetite and semi massive – massive sulphides occur between felsic units. These exhalites returned
surface rock chip samples that ranged from 2.3% to greater than 10% Cu, 0.04% – 0.10% Zn, 15 g/t – 69
g/t Ag and 0.3 g/t – 6.2 g/t Au over widths of 2.5 to 5 cm. Two drillholes located 2 km and 5 km to the west
of these holes intersected more distal felsic tuffaceous volcanic rocks and mudstones. Mother presents as a
high conviction, near surface target where surface mapping and historic drilling indicates a productive VMS
environment could be preserved.
Far East
The Far East target has been refined to a 1,600 m long partially coincident ZTEM and VTEM and magnetic
target. A total of four historical drill holes have tested 400 m (or ~11%) of the strike length and near surface
expression of the target and define a prospective geological environment for a potential VMS deposit where
anomalous copper and zinc values in syngenetic pyritic mudstones occur between a combination of felsic
crystal and lapilli volcanic tuffs. A strong ZTEM conductive anomaly measuring 540 m by 290 m at a
depth of 250 m presents an enticing target below and along strike to the east of the historic drilling and
beyond the depth of penetration of the VTEM.
Kris
The Kris target is defined by a 3,700 m long by 300 m wide ZTEM conductivity anomaly. Four r efined
high conductivity constrained inversion ZTEM anomalies each measuring between 450 m – 850 m along
strike by 300 m are untested by drilling. Historic al drilling, consisting of three holes , intersected sericite
altered crystal bearing tuffs with anomalous concentrations of pyrite and pyritic ash tuffs that resemble
those found near the Kutcho deposits indicating that the Kris target could preserve a productive VMS
environment.
Additional target areas are currently being evaluated which include the Jack, Bow and Josh Creek targets
Qualified Persons
The technical or scientific information in this press release has been reviewed and approved by Andrew
Sharp, P.Eng BC (Lic. No. 47907), FAusIMM, Chief Operating Officer for Kutcho Copper, who serves as
a qualified person under the definition of National Instrument 43-101.
About Kutcho Copper
Kutcho Copper Corp. is a Canadian resource company committed to social responsibility and the highest
environmental standards, focused on expanding and developing the Kutcho Project, its feasibility stage,
high-grade copper-zinc development project located in north-western British Columbia.
Vince Sorace
President & CEO, Kutcho Copper Corp.
For further information regarding Kutcho Copper Corp., please email [email protected] or visit our website
at www.kutcho.ca.
Cautionary Note Regarding Forward-Looking Statements
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the
TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release contains certain statements that may be deemed “forward- looking statements” with respect to the
Company within the meaning of applicable securities laws. Forward- looking statements are statements that are not
historical facts and are generally, but not always, identified by the words “plans”, “believes”, “intends”, “potential”
and similar expressions, or that events or conditions “will”, “may”, “could” or “should” occur. Although Kutcho
Copper believes the expectations expressed in such forward-looking statements are based on reasonable assumptions,
such statements are not guarantees of future performance, are subject to risks and uncertainties, and actual results
or realities may differ materially from those in the forward-looking statements. Such material risks and uncertainties
include, but are not limited to , statements and information related to the Feasibility Study; the results of planned
exploration; the ability of the Company to upgrade inferred mineral resources to higher categories and, subsequently,
to mineral reserves; the outcome of potential optimizations and opportunities identified in the Feasibility and
subsequently; the Company’s ability to raise sufficient capital to fund its obligations under its property agreements
going forward, to maintain its mineral tenures and concessions in good standing, to explore and develop the Kutcho
project or its other projects and for general working capital purposes; changes in economic conditions or financial
markets; the inherent hazards associates with mineral exploration and mining operations, future prices of copper and
other metals, changes in general economic conditions, accuracy of mineral resource and reserve estimates, the ability
of the Company to obtain the necessary permits and consents required to explore, drill and develop the Kutcho project
and if obtained, to obtain such permits and consents in a timely fashion relative to the Company’s plans and business
objectives for the projects , including the environmental assessment process ; the ability of the Company to conclude
agreements with First Nations; the general ability of the Company to monetize its mineral resources; and changes in
environmental and other laws or regulations that could have an impact on the Company’s operations, compliance
with environmental laws and regulations, aboriginal title claims and rights to consultation and accommodation,
dependence on key management personnel and general competition in the mining industry. Forward- looking
statements are based on the reasonable beliefs, estimates and opinions of the Company’s management on the date the
statements are made. Except as required by law, the Company undertakes no obligation to update these forward-
looking statements in the event that management’s beliefs, estimates or opinions, or other factors, should change.